PCB 표면처리에 따른 Sn-1.2Ag-0.7Cu-0.4In 무연솔더 접합부의 기계적 신뢰성에 관한 연구
Effects of PCB Surface Finishes on Mechanical Reliability of Sn-1.2Ag-0.7Cu-0.4In Pb-free Solder Joint
3
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
표면처리에 따른 Sn-1.2Ag-0.7Cu-0.4In 솔더범프의 접합 강도 평가를 위하여 전단 속도 및 열처리 시간에 따른 볼 전단강도 시험을 실시하였다. 전반적으로, 전단속도가 증가함에 따라 전단강도는 증가하였지만 인성은 감소하는 경향을 나타내었다. 파괴모드 관찰 결과, 전단 속도가 증가함에 따라 파괴모드의 경우, ENIG(electroless nickel immersion gold) 처리는 취성파괴가 대부분 지배적으로 존재하였고, OSP(organic solderability preservative) 처리는 pad open이 주로 발생하였다. 또한, 500 mm/s의 고속전단시험에서는 열처리 시간이 증가함에 따라 표면처리별 전단강도와 인성 값 모두 감소하는 경향을 보였다. ENIG 표면처리가 OSP 표면처리 보다 좋은 접합강도 특성을 보이는 것은 솔더범프 계면의금속간화합물의 물성 및 두께와 밀접한 연관이 있는 것으로 판단된다.
Abstract
Ball shear test was performed by test variables such as loading speed and annealing time in order to investigate the effect of surface finishes on the bonding strength of Sn-1.2Ag-0.7Cu-0.4In Pb-free solder. The shear strength increased and the ductility decreased with increasing shear speed. With increasing shear speed, the electroless nickel immersion gold (ENIG) finish showed dominant brittle fracture mode, while organic solderability preservative (OSP) finish showed pad open fracture mode. The shear strength and toughness for both surface finishes decreased with increasing annealing time under the high-speed shear test of 500 mm/s. Typically, the thickness of intermetallic compound increased with increasing annealing time, which means that exposure of brittle fracture became much easier. With increasing annealing time, the both ENIG and OSP finishes exhibited the pad open fracture mode. Overall, ENIG finish showed higher shear strength rather than OSP finish due to its superior barrier stability.
참고문헌 (20)
- "Directive 2002", 95, The European Parliament and of the Council of the European Union, pp.2003, ~
- "European Union WEEE Directive", 3rd Draft, ~ (2000)
- D. Suh, "Effects of Ag Content on Fracture Resistance of Sn-Ag-Cu Lead-Free Solders under High-Strain Rate Conditions", Materials Science and Engineering: A, 460, pp.595~ (2007)
- D. G. Kim, "Effect of Reflow Numbers on the Interfacial Reaction and Shear Strength of Flip- Chip Solder Joints", Journal of Alloys and Compounds, 458(1), pp.253~ (2007)
- M. Amagai, "High Solder Joint Reliability with Lead-Free Solders", 53rd Electronic Components and Technology Conference (ECTC), pp.317~ (2003), Packaging and Manufacturing Technology Society (CPMT)
- D. Q. Yu, "Improvement on the Microstructure Stability, Mechanical and Wetting Properties of Sn- Ag-Cu Lead-Free Solder with the Addition of Rare Earth Elements", Journal of Alloys and Compounds, 376(1), pp.170~ (2004)
- K. S. Kim, "Effects of Fourth Alloying Additive on Microstructures and Tensile Properties of Sn-Ag-Cu Alloy and Joints with Cu", Microelectronics Reliability, 43(2), pp.259~ (2003)
- S. K. Kang, "Microstructure and Mechanical Properties of Lead-Free Solders and Solder Joints Used in Microelectronic Applications", IBM Journal of Research and Development, 49(4), pp.607~ (2005)
- 구자명, "BGA 솔더 접합부의 기계적·전기적 특성에 미치는리플로우 횟수의 효과", 마이크로전자 및 패키징학회지, 14(4), pp.71~77 (2007), 한국마이크로전자및패키징학회
- V. Denis, "OSP Coatings: The Nitrogen Solution", Proc. 18th Electronic Manufacturing Technology Symposium, pp.101~ (1995), Packaging and Manufacturing Technology Society (CPMT)
- D. Chang, "The Study of OSP as Reliable Surface Finish of BGA Substrate", Proc. 6th Electronics Packaging Technology Conference (EPTC), pp.149~ (2004), Packaging and Manufacturing Technology Society (CPMT)
- 이호영, "ENIG 표면처리 공정 및 특성에 관한 연구", 한국표면공학회지, 40(1), pp.32~38 (2007), 한국표면공학회
- "JESD22-B117A (Solder Ball Shear)", JEDEC Standard, ~ (2006)
- A-Mi Yu, "The Effect of the Addition of In on the Reaction and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder Alloy", Metals and Materials International, 13(6), pp.517~520 (2007), 대한금속·재료학회
- J. Sopousek, "Thermal Analysis of the Sn-Ag-Cu-In Solder Alloy", Journal of Electronic Materials, 39(3), pp.312~ (2010)
- 유충식, "LTCC기판과 BGA 솔더접합부의 계면반응 및 기계적 특성", 대한금속·재료학회지, 47(3), pp.202~208 (2009), 대한금속·재료학회
- 안지혁, "플립칩 패키지 BGA의 전단강도 시험법 표준화", 마이크로전자 및 패키징학회지, 17(3), pp.1~9 (2010), 한국마이크로전자및패키징학회
- J. M. Koo, "Mechanical and Electrical Properties of Cu", Sn-3.5Ag, Journal of Electronic Materials, pp.2007, 37(1)[DOI]
- J. M. Kim, "Effect of Interfacial Microstructures on the Bonding Strength of Sn- 3.0Ag-0.5Cu Pb-free Solder Bump", Japanese Journal of Applied Physics, 51(5) (2011)
- H. Nishikawa, "Effect of Aging Conditions on Impact Strength of Sn-3.5Ag Based Soder Joint", Proc. 9th Electronics Packaging Technology Conference (EPTC) (2007), Packaging and Manufacturing Technology Society (CPMT)