Sn-58Bi Solder와 OSP 표면 처리된 PCB의 접합강도에 미치는 시효처리와 에폭시의 영향
Effect of Aging treatment and Epoxy on Bonding Strength of Sn-58Bi solder and OSP-finished PCB
1
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
다양한 무연솔더합금 가운데 Sn-58Bi solder는 저융점이며 상대적으로 높은 인장강도를 갖고 있지만 취성적이라는 단점을 갖고 있다. 이러한 Sn-58Bi 솔더의 기계적 강도를 보완하기 위해 epoxy를 함유한 Sn-58Bi 솔더가 연구되어져왔다. 본 연구는 Sn-58Bi 솔더와 Sn-58Bi 에폭시 복합솔더를 이용하여 PCB 기판에 접합한 후, 시효처리에 따른 솔더/기판 계면 미세구조와 기계적 특성변화를 연구하였다. OSP 표면처리된 PCB 기판에 솔더볼을 형성 한 후 85, 95, 105,115oC에서 100~1000 시간동안 시효처리하였으며, 기계적 특성평가로 저속전단시험을 진행하였다. 시효 처리 시간 및 온도의 증가에 따라 Cu6Sn5 금속간화합물층은 성장하였으며 Sn-58Bi 솔더 금속간화합물층이 Sn-58Bi 에폭시 복합솔더보다 두꺼웠다. 전단시험 결과, Sn-58Bi 에폭시 복합솔더가 Sn-58Bi 솔더보다 약 2배 높은 전단강도 값을 나타냈으며 시효시간이 증가할수록 전단강도 값은 감소하였다.
Abstract
Among various lead-free solders, the Sn-58Bi solders have been considered as a highly promising lead-freesolders because of its low melting temperature and high tensile strength. However, Sn-58Bi solder has the poor ductility. To enhance the mechanical property of Sn-58Bi solder, epoxy-enhanced Sn-58Bi solders have been studied. This studycompared the microstructures and the mechanical properties of Sn-58Bi solder and Sn-58Bi epoxy solder with agingtreatment. The solders ball were formed on the printed circuit board (PCB) with organic solderability preservative (OSP)surface finish, and then the joints were aged at 85, 95, 105 and 115oC for up to 100, 300, 500 and 1000 hours. The sheartest was conducted to evaluate the mechanical property of the solder joints. Cu6Sn5 intermetallic compound (IMC) layergrew with increasing aging time and temperature. The IMC layer for the Sn-58Bi epoxy solder was thicker than that forthe Sn-58Bi solder. According to result of shear test, the shear strength of Sn-58Bi epoxy solder was higher than that ofSn-58Bi solder and the shear strength decreased with increasing aging time.
참고문헌 (25)
- J. W. Yoon, "Investigation of interfacial reactions between Sn-5Bi solder and Cu substrate", J. Electron. Mater., 359, pp.202~ (2003)
- J. J. Soh, "Technical trend of Restriction of Hazardous Substances Directive(RoHS) (in korean)", Conference of The Korean Institute of Electrical Engineering, pp.1289~ (2009)
- J. W. Yoon, "Growth of an Intermetallic Compound layer with Sn-3.5Ag-5Bi on Cu and Ni- P", Cu during Aging Treatment, 2003, pp.32(11), 1195~
- J. W. Yoon, "Interfacial reaction of ENIG", Sn-Ag-Cu, Microelectron. Eng., pp.2006, 83[DOI]
- S. W. Kim, "Interfacial Reactions and Shear Strengths between Sn-Ag-based Pb-Free Solder Balls and Au", EN, J. Electron. Mater., pp.2004, 33(10)[DOI]
- J. Glazer, "Microstructure and Mechanical Properties of Pb- Free Solder Alloys for Low-Cost Electronic Assembly: A Review", J. Electron. Mater., 23(8), pp.693~ (1994)
- J. W. Kim, "Characterization of failure behaviors in anisotropic conductive interconnection", MATERIALS TRANSACTIONS, 48(5), pp.1070~1078 (2007), JAPAN INST METALS
- J. W. Yoon, "Effects of isothermal aging and temperature-humidity treatment of substrate on joint reliability of Sn-3.0Ag-0.5Cu", OSPfinished Cu CSP solder joint, 2008, pp.48, 1864~
- K. Zeng, "Six cases of reliability study of Pbfree solder joints in electronic packaging technology", Mat. Sci. Eng.A-Struct, 38, pp.55~ (2002)
- S. K. Kang, "Lead (Pb)-Free Solders for Electronic Packaging", J. Electron. Mater., 23(8), pp.701~ (1994)
- C. B. Lee, "Intermetallic compound layer formation between Sn-3.5 mass %Ag BGA solder ball and (Cu, immersion Au", electroless Ni-P, J. Mater. Sci., pp.2003, 14[DOI]
- J. W. Yoon, "Reliability Investigation and Interfacial Reaction of Ball- Grid-Array Packages Using the Lead-Free Sn-Cu Solder", J. Electron. Mater., 33(10), pp.1190~ (2004)
- J. W. Yoon, "IMC morphology, interfacial reaction and joint reliability of Pb-free Sn-Ag-Cu solder on electrolytic Ni BGA substrate", J. Alloy. Compd., 392, pp.247~ (2005)
- I. E. Anderson, "Lead-Free Electronic Solders", pp.55~ (2007), Springer US
- J. W. Yoon, "Intermetallic compound layer growth at the interface between Sn-Cu-Ni solder and Cu substrate", J. Alloy. Compd., 381, pp.151~ (2004)
- 김성혁, "PCB 표면처리에 따른 Sn-1.2Ag-0.7Cu-0.4In 무연솔더 접합부의 기계적 신뢰성에 관한 연구", 마이크로전자 및 패키징학회지, 19(4), pp.57~64 (2012), 한국마이크로전자및패키징학회[DOI]
- W. R. Myung, "Mechanical property of the epoxy-contained Sn-58Bi solder with OSP surface finish", J. Alloy. Compd., 615, pp.411~ (2014)
- I. Shohji, "Comparison of low-melting lead-free solders in tensile properties with Sn- Pb eutectic solder", J. Mater. Sci., 15, pp.219~ (2004)
- C. Fuchs, "Interfacial reactions between Sn-57Bi-1Ag solder and electroless Ni-P", immersion Au under soild-state aging, 2012, pp.47, 4036~
- 최지나, "열압착 접합 조건에 따른 경·연성 인쇄회로기판 간 Sn-58Bi 무연솔더 접합부의 기계적 특성", 마이크로전자 및 패키징학회지, 20(2), pp.17~22 (2013), 한국마이크로전자및패키징학회[DOI]
- Solder Ball Shear, "Standard, J. E. D. E. C.", JEDEC Solid State Technology Association, ~, pp.JESD22-B117A (2006)
- J. W. Yoon, "Interfacial Reactions Between Sn-58 mass% Bi Eutectic Solder and (Cu, Electroless Ni-P", Cu)Substrate, 2002, pp.43(8), 1821~
- P. T. Vianco, "Intermetallic Compound Layer Formation Between Copper and Hot-Dipped 100In, 50In-50Sn, 100Sn, and 63Sn-37Pb Coatings", J. Electron. Mater, 23(7), pp.583~ (1994)
- 김종웅, "Failure Mechanism of Pb-Bearing and Pb-Free Solder Joints under High-Speed Shear Loading", Metals and Materials International, 16(1), pp.7~12 (2010), 대한금속·재료학회
- J. M. Koo, "Effect of displacement rate on ball shear properties for Sn-37Pb and Sn-3.5Ag BGA solder joints during isothermal aging", Microelectron. Reliab., 47(12), pp.2169~ (2007)