Ru Nanoparticle이 첨가된 Sn-58Bi 솔더의 기계적 신뢰성 및 계면반응에 관한 연구
Mechanical Properties and Interfacial Reactions of Ru Nanoparticles Added Sn-58Bi Solder Joints
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
대표적인 저온솔더인 Sn-58Bi에 Ru nanoparticles을 첨가하여 Sn-58Bi-xRu 복합솔더를 제작하고 Cu/OSP 및ENIG 표면처리된 PCB 기판과 반응시켜 계면반응 및 솔더조인트 신뢰성을 분석하였다. Cu/OSP와의 반응에서 형성된Cu6Sn5 IMC는 Ru 함량에 따른 두께 변화가 거의 없고 100hr aging 후에도 큰 변화없이 고속 전단시험시 솔더 내부로 연성파괴가 발생하였다. ENIG 와의 반응시에는 Ru 함량이 증가함에 따라서 Ni3Sn4 IMC 두께가 감소하는 경향을 보였으며 일부 시편에서 ENIG 특유의 취성파괴 현상이 발견되었다. Ru 원소는 계면 부근에서 발견되지 않아서 계면반응에 크게 관여하지 않는 것으로 판단되며 주로 Bi phase와 함께 존재하는 것으로 분석되고 있는데 어떠한 형태로 두 원소가 공존하고 있는지에 대해서는 추가적인 연구가 필요하다.
Abstract
Sn-58Bi-xRu composite solders were prepared by adding Ru nanoparticles to Sn-58Bi, a typical lowtemperature solder, and the interfacial reaction and solder joint reliability were analyzed by reacting with Cu/OSP and ENIG surface treated PCB boards. The Cu6Sn5 IMC formed by the reaction with Cu/OSP had little change in thickness depending on the Ru content, and ductile fracture occurred inside the solder during the high-speed shear test without any significant change even after 100 hr aging. In reaction with ENIG, the Ni3Sn4 IMC thickness tended to decrease as the Ru content increased, and ENIG-specific brittle fracture was found in some specimens. Since Ru element is not found near the interface, it is judged not to be significantly involved in the interfacial reaction, and it is analyzed that it mainly exists together with the Bi phase.
참고문헌 (24)
- K. Tu, "Tin-lead (SnPb) solder reaction in flip chip technology", Mater. Sci. Eng. C., 34(1), pp.1~ (2001)
- J. W. Yoon, "Interfacial reaction of ENIG", Sn-Ag-Cu, Microelectronic Eng., pp.2006, 83(11-12)[DOI]
- H. ma and, "A review of mechanical properties of lead-free solders for electronic packaging", J. Mater. Sci., 44(5), pp.1141~ (2009)
- I. E. Anderson, "Development of Sn-Ag-Cu and Sn-Ag-Cu-X alloys for Pb-free electronic solder applications", Lead-Free Electron. Solders., 55 (2006)
- Osório, "Microstructure and mechanical properties of Sn-Bi, Sn-Ag and Sn-Zn lead-free solder alloys", J. Alloys Compd., 572, pp.97~ (2013)
- T. Laurila, "Impurity and alloying effects on interfacial reaction layers in Pb-free soldering", Mater. Sci. Eng. C., 68(1-2), pp.1~ (2010)
- Y. Goh, "Effects of hydroquinone and gelatin on the electrodeposition of Sn-Bi low temperature Pb-free solder", Electrochim. Acta., 90(15), pp.265~ (2013)
- Y. Xu, "Retarding the electromigration effects to the eutectic SnBi solder joints by micro-sized Ni-particles reinforcement approach", J. Alloys Compd., 509(7), pp.3286~ (2011)
- S. K. Lin, "Effective suppression of interfacial intermetallic compound growth between Sn-58 wt.% Bi solders and Cu substrates by minor Ga addition", J. Alloys Compd., 586, pp.319~ (2014)
- J. Shen, "Effects of minor Cu and Zn additions on the thermal, microstructure and tensile properties of Sn-Bi-based solder alloys", J. Alloys Compd., 614, pp.63~ (2014)
- M. Usui, "Effects of thermal aging on Cu nanoparticle", Bi-Sn solder hybrid bonding, 2017, pp.78, 93~
- L. Yang, "Microstructural evolution and IMCs growth behavior of Sn-58Bi-0.25 Mo solder joint during aging treatment", Mater. Res. Express., 5(2), pp.026304~ (2018)
- W. Dong, "Effects of trace amounts of rare earth additions on microstructure and properties of Sn-Bi-based solder alloy", J. Electron. Mater., 37(7), pp.982~ (2008)
- C. Andersson, "Thermal cycling aging effect on the shear strength, microstructure, intermetallic compounds (IMC) and crack initiation and propagation of reflow soldered Sn-3.8 Ag-0.7 Cu and wave soldered Sn-3.5 Ag ceramic chip components", IEEE, Trans. Comp. Packag. Manufac. Tech., 31(2), pp.331~ (2008)
- J. W. Yoon, "Effect of isothermal aging on intermetallic compound layer growth at the interface between Sn-3.5 Ag-0.75 Cu solder and Cu substrate", J. Mater. Sci., 39(13), pp.4211~ (2004)
- Y. C. Sohn, "Spalling of intermetallic compounds during the reaction between lead-free solders and electroless Ni-P metallization", J. Mater. Res., 19(8), pp.2428~2436 (2004)
- Y. C. Sohn, "Effect of Morphological Change of Ni3Sn4 Intermetallic Compounds on the Growth Kinetics in Electroless Ni-P", Sn-3.5Ag Solder Joint, 2020, pp.51, 2905~2914
- J. Charles, "A thermodynamic assessment of the ruthenium-tin (Ru-Sn) system", J. Phase Equil., 20, pp.573~ (1999)
- Moffatt, W.G., "Binary Phase Diagrams Handbook", General Electric Comp., ~ (1978)
- T. Y. Kang, "Bismuth segregation enhances intermetallic compound growth in SnBi", Cu microelectronic interconnect, 2011, pp.509, 1785~1789
- P. J. Shang, "Bi-induced voids at the Cu3Sn", Cu interface in eutectic SnBi, Scr. Mater., pp.2008, 58[DOI]
- Y. C. Sohn, "Correlation between chemical reaction and brittle fracture found in electroless Ni(P)", immersion gold-solder interconnection, 2005, pp.20, 1931~1934
- C. Key Chung, "Origin and evolution of voids in electroless Ni during soldering reaction", Acta Mater., 60(11), pp.4586~4593 (2012)
- W. I. Seo, "Growth of intermetallic compounds and brittle fracture behavior of Sn-Ag-Cu", ENIG joint with columnar Ni-P layer, 2021, pp.32, 1042~1051