Characterization of Mechanical Property Change in Polymer Aerogels Depending on the Ligand Structure of Acrylate Monomer
0
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
In an effort to overcome the weakness of aerogel, polymer aerogels have been prepared by copolymerizing the different types of monomers through sol-gel process. Polymerizing the successive phase of a high internal phase emulsion, which has interconnected porous structure, porous polymer aerogel can be manufactured. In this paper, we use the styrene/divinylbenzene chain as a basic monomer structure, and additionally use 2-ethylhexyl methacrylate (2-EHMA) or 2-ethylhexyl acrylate (2-EHA) as monomers for distinguishing the visible mechanical properties of synthesized polymer aerogel. We can observe the different tendency of polymer aerogels by kinds of monomer or ratio. Flexibility and microstructure can be changed by the types of monomer. EHA polymer aerogel shows high flexibility and thin microstructure, and EHMA polymer aerogel shows high hardness and thick microstructure. EHA/EHMA polymer aerogel shows the intermediate nature between them. By utilizing the mechanical properties of three types of polymer aerogels to adequate situation or environment, polymer aerogels could be used as drug agent, ion exchange resin, oil filter and insulator, and so on.
Abstract
In an effort to overcome the weakness of aerogel, polymer aerogels have been prepared by copolymerizing the different types of monomers through sol-gel process. Polymerizing the successive phase of a high internal phase emulsion, which has interconnected porous structure, porous polymer aerogel can be manufactured. In this paper, we use the styrene/divinylbenzene chain as a basic monomer structure, and additionally use 2-ethylhexyl methacrylate (2-EHMA) or 2-ethylhexyl acrylate (2-EHA) as monomers for distinguishing the visible mechanical properties of synthesized polymer aerogel. We can observe the different tendency of polymer aerogels by kinds of monomer or ratio. Flexibility and microstructure can be changed by the types of monomer. EHA polymer aerogel shows high flexibility and thin microstructure, and EHMA polymer aerogel shows high hardness and thick microstructure. EHA/EHMA polymer aerogel shows the intermediate nature between them. By utilizing the mechanical properties of three types of polymer aerogels to adequate situation or environment, polymer aerogels could be used as drug agent, ion exchange resin, oil filter and insulator, and so on.
참고문헌 (29)
- S. Mulik, "Cross-Linking 3D Assemblies of Nanoparticles into Mechanically Strong Aerogels by Surface-Initiated Free-Radical Polymerization", Chem. Mater, 20, pp.5035~ (2008)
- X. Hu, "Characterization of Silica-polymer Aerogel Composites by Smallangle Neutron Scattering and Transmission Electron Microscopy", J. Non-Cryst. Solids, 288, pp.184~ (2001)
- S. J. Wang, "A Preliminary Study on the Etching Behavior of SiO2 Aerogel Film with CHF3Gas", J. Korean Phys. Soc, 33, pp.S135~ (1998)
- D. Ge, "Hydrophobic and Thermal Insulation Properties of Silica Aerogel", Epoxy Composite, 2009, pp.355, 2610~
- N. Kuthirummal, "Photo-formation of Gold Nanoparticles: Photoacoustic Studies on Solid Monoliths of Au(III)-chitosan-silica Aerogels", Spectrochim. Acta A, 70, pp.700~ (2008)
- JaeTae Seo, "Large Optical Nonlinearity of Highly Porous Silica Nanoaerogels in the Nanosecond Time Domain", Journal of the Korean Physical Society, 48(6), pp.1395~1399 (2006), 한국물리학회
- M. F. Bertino, "Room Temperature Synthesis of Noble Metal Clusters in the Mesopores of Mechanically Strong Silica-Polymer Aerogel Composites", J. Sol-gel Sci. Techn, 30, pp.43~ (2004)
- J. Chandradass, "Synthesis of Silica Aerogel Blanket by Ambient Drying Method Using Water Glass Based Precursor and Glass Wool Modified by Alumina Sol", J. Non-Cryst. Solids, 354, pp.4115~ (2008)
- N. R. Cameron, "High Internal Phase Emulsion Templating as a Route to Well-defined Porous Polymers", Polymer, 46, pp.1439~ (2005)
- U. Sevsek, "Poly(styrene-co-divinylbenzene-co-2-ethylhexyl)acrylate Membranes with Interconnected Macroporous Structure", Mater. Tehnol, 45(3), pp.247~ (2011)
- Y. Lin, "Properties of Absorbent Acrylic Foam Prepared Based on the Method of High Internal Phase Emulsion", J. Macromol. Sci. B, 54, pp.102~ (2015)
- 정한균, "HIPE 중합에 의한 미세기공 발포체의 모폴로지 및 물성: 유화계 조성의 영향", 폴리머, 26(6), pp.759~766 (2002), 한국고분자학회
- J. M. Williams, "Toroidal Microstructures from Water-in-oil Emulsions", Langmuir, 4(1), pp.44~ (1988)
- J. M. Williams, "Spatial Distribution of the Phases in Water-in-oil Emulsions. Open and Closed Microcellular Foams from Cross-linked Polystyrene", Langmuir, 4(3), pp.656~ (1988)
- J. B. Ni, "Superabsorbent Polymer for Sanitary Application", Chem. Engi, 4, pp.46~ (2009)
- X. W. He, "Carbohydrate Superabsorbent Material" (2006), Chem Industry Press
- W. Y. Zhang, "Preparation and Properties of Sodium Polyacrylate Superabsorbent", Fine Chem, 3, pp.531~ (2000)
- W. L. Xu, "Study on Inverse Suspension Polymerization of a Water Absorbent Polyacrylic Acid", Fine Chem, 4, pp.202~ (2000)
- Z. B. Luo, "Preparation and Performance Research of PVA Formaldehyde Absorbent Sponge", Plastics Ind, 8, pp.77~ (2012)
- J. P. Wu, "A study on the Microcellular Foam via Inverse Emulsion Polymerization", Polymer(Korea), 22, pp.642~ (1998)
- P. Krajnc, "Acrylic Acid “Reversed”PolyHIPEs", Macromol. Rapid Comm, 26, pp.1289~ (2005)
- S. Kovacic, "Highly Porous Open-Cellular Monoliths from 2-Hydroxyethyl Methacrylate Based High Internal Phase Emulsions (HIPEs): Preparation and Void Size Tuning", Macromolecules, 40, pp.8056~ (2007)
- N. R. Cameron, "Preparation and Glass Transition Temperatures of Elastomeric PolyHIPE Materials", J. Mater. Chem, 7(11), pp.2209~ (1997)
- F. Svec, "Monolithic Materials:Preparation, Properties and Applications", Elsevier, 67, pp.261~ (2003)
- 한우제, "나노입자 합성방법에 따른 타이타늄산바륨 나노입자뭉침 현상 연구", 마이크로전자 및 패키징학회지, 22(2), pp.33~39 (2015), 한국마이크로전자및패키징학회[DOI]
- D. B. Mahadik, "Elastic and Superhydrophobic Monolithic Methyltrimethoxysilane-based Silica Aerogels by Two-step Sol-gel Process", 마이크로전자 및 패키징학회지, 23(1), pp.35~39 (2016), 한국마이크로전자및패키징학회
- D. L. Pavia, "Introduction to Spectroscopy: A Guide for Students of Organic Chemistry" (1987), W. B. Saunders Company
- X. Lu, "Synthesis of Poly(styrene-co-3-trimethoxysilyl propyl methacrylate) Microspheres Coated with Polysiloxane Layer", Colloid Polym. Sci, 285, pp.599~ (2007)
- A. Y. Sergienko, "Polymerized High Internal-Phase Emulsions: Properties and Interaction with Water", J. Appl. Polym. Sci, 84, pp.2018~ (2002)