본문 바로가기
KERD
논문KCI 등재

Elastic and Superhydrophobic Monolithic Methyltrimethoxysilane-based Silica Aerogels by Two-step Sol-gel Process

0

조회

0

다운로드

5

인용

0

참고문헌

키워드

주제분류재료공학

초록

The flexible and superhydrophobic properties of silica aerogels are extremely important material for thermal insulation and oil spill cleanup applications for their long-term use. Flexible silica aerogels were synthesized by using a two-step sol-gel process with precursors, methyltrimethoxysilane (MTMS) followed by supercritical drying. Silica aerogels were prepared at different molar ratio of methanol to MTMS (M). It was observed that the silica aerogels prepared at M=28 were monolithic but inelastic in nature, however, for M=35, the obtained aerogels were monolithic, elastic in nature with less shrinkage. The microstructural studies were carried out using scanning electron microscopy and surface area measurements. The hydrophobicity was confirmed by Fourier transform Infrared spectroscopy and water contact angle measurements. The detailed insight mechanism for flexible nature of silica aerogels and hydrophobic behavior were studied.

Abstract

The flexible and superhydrophobic properties of silica aerogels are extremely important material for thermal insulation and oil spill cleanup applications for their long-term use. Flexible silica aerogels were synthesized by using a two-step sol-gel process with precursors, methyltrimethoxysilane (MTMS) followed by supercritical drying. Silica aerogels were prepared at different molar ratio of methanol to MTMS (M). It was observed that the silica aerogels prepared at M=28 were monolithic but inelastic in nature, however, for M=35, the obtained aerogels were monolithic, elastic in nature with less shrinkage. The microstructural studies were carried out using scanning electron microscopy and surface area measurements. The hydrophobicity was confirmed by Fourier transform Infrared spectroscopy and water contact angle measurements. The detailed insight mechanism for flexible nature of silica aerogels and hydrophobic behavior were studied.

참고문헌 (18)

  1. M. A. Aegerter, "Aerogels Handbook" (2011), Springer
  2. A. V. Rao, "Synthesis of flexible silica aerogels using methyltrimethoxysilane (MTMS) precursor", J. Colloid and Interface Sci, 300(1), pp.279~ (2006)
  3. G. C. Bond, "Structure and reactivity of titania-supported oxides. Part 3: reaction of isopropanol over vanadia-titania catalysts", Appl. Catal, 33, pp.219~ (1987)
  4. T. M. Tillotson, "Transparent ultralowdensity silica aerogels prepared by a two-step sol-gel process", J. Non-Cryst. Solids, 145, pp.44~ (1992)
  5. D. Y. Nadargi, "Studies on rheological properties of methyltriethoxysilane (MTES) based flexible superhydrophobic silica aerogels", Microporous Mesoporous Mater, 117, pp.617~ (2009)
  6. J. P. Randall, "Polymer reinforced silica aerogels: effects of dimethyldiethoxysilane and bis(trimethoxysilylpropyl)amine as silane precursors", J. Mater. Chem. A, 1, pp.6642~ (2013)
  7. 이정숙, "표면 기능화된 Micelle-Templated Silica 나노세공 내 메탈로센 담지 및 에틸렌 중합", 폴리머, 36(1), pp.111~116 (2012), 한국고분자학회
  8. 한덕영, "SiOC(-H) 박막 제조용 Methyltriphenylsilane 전구체 합성 및 특성분석", 한국재료학회지, 20(11), pp.600~605 (2010), 한국재료학회
  9. A. Fidalgo, "Flexible hybrid aerogels prepared under subcritical conditions", J. Mater. Chem. A, 1, pp.12044~ (2013)
  10. D. B. Mahadik, "Effect of concentration of trimethylchlorosilane (TMCS) and hexamethyldisilazane (HMDZ) silylating agents on surface free energy of silica aerogels", J. Colloid Interface Sci, 356, pp.298~ (2011)
  11. D. P. Mohite, "Polydicyclopentadiene aerogels grafted with PMMA: II. Nanoscopic characterization and origin of macroscopic deformation", Soft Matter, 9, pp.1531~ (2013)
  12. L. A. Capadona, "Flexible, low-density polymer crosslinked silica aerogels", Polymer, 47, pp.5754~ (2006)
  13. M. S. Kavale, "Optically transparent, superhydrophobic methyltrimethoxysilane based silica coatings without silylating reagent", Appl. Surf. Sci, 258, pp.158~ (2011)
  14. A. P. Rao, "Hydrophobic and Physical Properties of the Two Step Processed Ambient Pressure Dried Silica Aerogels with Various Exchanging Solvents", J. Sol-Gel Sci. Technol, 36, pp.285~ (2005)
  15. Y. Duan, "Surface Modification and Reinforcement of Silica Aerogels Using Polyhedral Oligomeric Silsesquioxanes", Langmuir, 28(43), pp.15362~ (2012)
  16. W. C. Li, "Control of Mesoporous Structure of Aerogels Derived from Cresol–Formaldehyde", J. Colloid Interface Sci, 254, pp.153~ (2002)
  17. L. Zhong, "Highly flexible silica aerogels derived from methyltriethoxysilane and polydimethylsiloxane", New J. Chem, 39, pp.7832~ (2015)
  18. H. Maleki, "Synthesis of lightweight polymer-reinforced silica aerogels with improved mechanical and thermal insulation properties for space applications", Microporous Mesoporous Mater, 197, pp.116~ (2014)

관련 논문AI추천

Enhancement in the Textural Properties and Hydrophobicity of Tetraethoxysilane-based Silica Aerogels by Phenyl Surface Modification김용헌, 김태희, 박형호, 이규연, 최해령, 정해누리, Rushikesh P. Dhavale, Vinayak G. Parale한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2020 · 제27권 제2호Ambient-pressure Drying Synthesis of High-performance Silica Aerogel Powders by Controlling Hydrolysis Reaction of Water GlassChang Kook Hong, Churl-Hee Cho, Jin-Suk Lee, Oh-Hoon Kwon, Sang-Eun Lee, Young-Soo Ahn청정에너지연구소 · Journal of Ceramic Processing Research2017 · 제18권 제11호벤젠 유기물 도입에 따른 실리카 기반 에어로겔의 소수성 및 기계적 특성 연구김태희, 박형호, 이지훈, 최하령, Rushikesh P. Dhavale, WANG QI한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2020 · 제27권 제4호Chemically Bonded Thermally Expandable Microsphere-silica Composite Aerogel with Thermal Insulation Property for Industrial Use김종일, 문승환, 박형호, 배영광, 이규연, 최하령, Varsha D. Phadtare한국마이크로전자및패키징학회 · 마이크로전자 및 패키징학회지2019 · 제26권 제2호상압 건조 공정을 이용한 다공성 세라믹스 구조체 내부에 소수성 실리카 에어로겔의 합성박영조, 송인혁, 윤희숙, 이영우, 한유동, 홍선욱, 황기영한국분말재료학회 · 한국분말재료학회지2011 · 제18권 제3호Color manipulation of silica aerogel by copper incorporation during sol-gel processIl-Kyu Park, Sang-Seok Lee청정에너지연구소 · Journal of Ceramic Processing Research2019 · 제20권 제1호

이 간행물의 다른 논문 (5건)