전도성 접착제를 이용한 패키징 기술
Recent Advances in Conductive Adhesives for Electronic Packaging Technology
2
조회
0
다운로드
5
인용
0
참고문헌
초록
Conductive adhesives have recently received a lot of focus and attention from the researchers in electronics industry as a potential substitute to lead-containing solders. Numerous studies have shown that the conductive adhesives have many advantages over conventional soldering such as environmental friendliness, finer pitch feasibility and lower temperature processing. This review focuses on the recent research trends on the reliability and property evaluation of anisotropic and non-conductive films that interconnect the integrated circuit component to the printed circuit board or other types of substrate. Major topics covered are the conduction mechanism in adhesive interconnects; mechanical reliability; thermo-mechanical-hygroscopic reliability and electrical performance of the adhesive joints. This review article is aimed at providing a better understanding of adhesive interconnects, their principles, performance and feasible applications.
Abstract
Conductive adhesives have recently received a lot of focus and attention from the researchers in electronics industry as a potential substitute to lead-containing solders. Numerous studies have shown that the conductive adhesives have many advantages over conventional soldering such as environmental friendliness, finer pitch feasibility and lower temperature processing. This review focuses on the recent research trends on the reliability and property evaluation of anisotropic and non-conductive films that interconnect the integrated circuit component to the printed circuit board or other types of substrate. Major topics covered are the conduction mechanism in adhesive interconnects; mechanical reliability; thermo-mechanical-hygroscopic reliability and electrical performance of the adhesive joints. This review article is aimed at providing a better understanding of adhesive interconnects, their principles, performance and feasible applications.
참고문헌 (21)
- J. H. Lau, "Flip Chip Technologies", pp.25~59 (1995), McGraw-Hill, Inc.
- J. H. Lau, "Low Cost Flip Chip Technologies for DCA, WLCSP, and PBGA Assemblies", pp.1~17 (2000), McGraw-Hill, Inc.
- Jong-Woong Kim, "Evaluation of Solder Joint Reliability in Flip-Chip Packages during Accelerated Testing", Journal of Electronic Materials, 34, pp.1550~ (2005)
- Jeong-Won Yoon, "Effects of isothermal aging and temperature- humidity treatment of substrate on joint reliability of Sn-3.0Ag-0.5Cu", OSP-finished Cu CSP solder joint, 2008, pp.48, 1864~
- De-Shin Liu, "Failure mode analysis of lead-free solder joints under high speed impact testing", Materials Science and Engineering A, 494, pp.196~ (2008)
- Jung-Sub Lee, "Effects of Co addition in eutectic Sn-3.5Ag solder on shear strength and microstructural development", Microelectronic Engineering, 85, pp.1577~ (2008)
- Yi-Shao Lai, "Effects of different drop test conditions on board-level reliability of chip-scale packages", Microelectronics Reliability, 48, pp.274~ (2008)
- Yi Li, "Novel Nano-Scale Conductive Films With Enhanced Electrical Performance and Reliability for High Performance Fine Pitch Interconnect", IEEE Transactions on Advanced Packaging, 32, pp.123~ (2009)
- J. H. Constable, "Analysis of the Constriction Resistance in an ACF Bond", IEEE Transactions on Components and Packaging Technologies, 29, pp.494~ (2006)
- J. Liu, "Recent advances in conductive adhesives for direct chip attach applications", Proceedings of the First IEEE International Symposium on Polymeric Electronics Packaging, pp.107~ (1997)
- Jong-Woong Kim, "Analysis of Failure Mechanism in Aniso-tropic Conductive and Non-Conductive Film Interconnections", IEEE Transactions on Components and Packaging Technologies, 31, pp.65~ (2008)
- Myung-Jin Yim, "Design and Understanding of Anisotropic Conductive Films (ACFs) for LCD Packaging", IEEE Transactions on Components, Packaging, and Manufacturing Technology-Part A, 21, pp.226~ (1998)
- Jong-Woong Kim, "Characterization of Failure Behaviors in Anisotropic Conductive Interconnection", Materials Transactions, 48, pp.1070~ (2007)
- Ranjith Divigalpitiya, "Electrical Characteristics of Contacts Made With Anisotropic Conductive Adhesives: Current Density Distributions at the Contact", IEEE Transactions on Components and Packaging Technologies, 31, pp.216~ (2008)
- Bo-In Noh, "Reliability of Au bump flip chip packages with adhesive materials using four-point bending test", International Journal of Adhesion and Adhesives, 29, pp.650~ (2009)
- Hyoung-Joon Kim, "Adhesion and Reliability of Anisotropic Conductive Films (ACFs) Joints on Organic Solderability Preservatives (OSPs) Metal Surface Finish", Journal of Electronic Materials, 37, pp.1003~ (2008)
- Hsien-Chie Cheng, "On the Thermal-Mechanical Behaviors of a Novel Nanowire-Based Anisotropic Conductive Film Technology", IEEE Transactions on Advanced Packaging, 32, pp.546~ (2009)
- Kyung-Woon Jang, "Material properties of anisotropic conductive films (ACFs) and their flip chip assembly reliability in NAND flash memory applications", Microelectronics Reliability, 48, pp.1052~ (2008)
- Jong-Woong Kim, "Electrical characterization of adhesive flip chip interconnects for microwave application", Journal of Micro, 2008, pp.72, 023007~
- Myung Jin Yim, "Flip Chip Interconnection With Anisotropic Conductive Adhesives for RF and High-Frequency Applications", IEEE Transactions on Components and Packaging Technologies, 28, pp.789~ (2005)
- Jong-Woong Kim, "Transmission property of flip chip package with adhesive interconnection for RF applications", Microelectronic Engineering, 86, pp.314~ (2009)