플렉시블 전자소자의 유연전도성 접합 기술

키워드

참고문헌 (75)

1. W. Luft, "Solar Cell Interconnector Design", IEEE Transactions on Aerospace and Electronic Systems, 7(5), pp.781~791 (1971)
2. E. E. de Kluizenaar, "Reliability of Soldered Joints: A Description of the State of the Art: Part 1", Soldering & Surface Mount Technology, 2(1), pp.27~38 (1990)
3. W. J. Plumbridge, "Solders in electronics", Journal of Materials Science, 31, pp.2501~2514 (1996)
4. 이설민, "Reliability Issues and Solutions in Flexible Electronics Under Mechanical Fatigue", Electronic Materials Letters, 14(4), pp.387~404 (2018), 대한금속·재료학회[DOI]
5. W. Xu, "Effects of interfacial properties on the ductility of polymer-supported metal films for flexible electronics", International Journal of Solids and Structures, 47(14), pp.1830~1837 (2010)
6. N. Palavesam, "Influence of Flexibility of the Interconnects on the Dynamic Bending Reliability of Flexible Hybrid Electronics", Electronics, 9(2), pp.238~ (2020)
7. W. Xu, "Ductility of thin copper films on rough polymer substrates", Materials & Design, 32(1), pp.154~161 (2011)
8. X. Luo, "Fatigue of metals at nanoscale: Metal thin films and conductive interconnects for flexible device application", Nano Materials Science, 1(3), pp.198~207 (2019)
9. Ho Sun Lim, "Low temperature-cured electrically conductive pastes for interconnection on electronic devices", Journal of Materials Chemistry, 22(38), pp.20529~ (2012), Royal Society of Chemistry (RSC)[DOI]
10. M. V. C. Morais, "On the effecof electric field application during the curing process on the electrical conductivity of single-walled carbon nanotubes–epoxy composites", Carbon, 150, pp.153~167 (2019)
11. T. Y. Kuo, "Flexible and ultra-thin embedded chip package", IEEE 200959th Electronic Components and Technology Conference, pp.1749~1753 (2009)
12. J. Oh, "Flexible Antenna Integrated with an Epitaxial Lift-OffSolar Cell Array for Flapping-Wing Robots", IEEE Transactions on Antennas and Propagation, 62(8), pp.4356~4361 (2014)
13. J. Gerth, "The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel", Wear, 264(9), pp.885~892 (2008)
14. N. Selvakumar, "Review of physical vapor deposited (PVD) spectrally selective coatings for mid-and high-temperature solar thermal applications", Solar Energy Materials and Solar Cells, 98, pp.1~23 (2012)
15. Byoung-Youp Kim, "Comparison Study for TiN Films Deposited from Different Method: Chemical Vapor Deposition and Atomic Layer Deposition", MRS Proceedings, 672, pp.78~ (2001), Springer Science and Business Media LLC[DOI]
16. A. Z. Moshfegh, "Physics and Technology of Thin Films", pp.28~53 (2004)
17. R. Morent, "Adhesion enhancement by a dielectric barrier discharge of PDMS used for flexible and stretchable electronics", Journal of Physics D : Applied Physics, 40(23), pp.7392~ (2007)
18. S. Iwamori, "Adhesion and Friction Properties of Fluorocarbon Polymer Thin Films Coated onto Metal Substrates", Key Engineering Materials, 384, pp.311~320 (2008)
19. F. Awaja, "Adhesion of polymers", Progress in Polymer Science, 34(9), pp.948~968 (2009)
20. Y. J. Fu, "Effect of UV-Ozone Treatment on Poly(dimethylsiloxane) Membranes: Surface Characterization and Gas Separation Performance", Langmuir, 26(6), pp.4392~4399 (2010)
21. J. A. Jofre-Reche, "Increased adhesion of polydimethylsiloxane (PDMS)to acrylic adhesive tape for medical use by surface treatment with an atmospheric pressure rotating plasma jet", Journal of Physics D : Applied Physics, 49(33), pp.334001~ (2016)
22. V. M. Graubner, "Photochemical modification of cross-linked poly (dimethylsiloxane) by irradiation at 172nm", Macromolecules, 37(16), pp.5936~5943 (2004)
23. T. Fukushima, "Process Integration for FlexTrateTM", 2018 International Flexible Electronics Technology Conference (IFETC), pp.1~2 (2018)
24. T. Fukushima, "Self-Assembly Technologies for FlexTrateTM", 2018 IEEE 68th Electronic Components and Technology Conference (ECTC), pp.1836~1841 (2018)
25. T. Fukushima, ""FlexTrateTM”—Scaled Heterogeneous Integration on Flexible Biocompatible Substrates Using FOWLP", 2017 IEEE 67th Electronic Components and Technology Conference (ECTC), pp.649~654 (2017)
26. S. W. Youn, "Metallization of Cu on Parylene-C Film Micro-patterned by Hotembossing", Polytronic 2007 - 6th International Conference on Polymers and Adhesives in Microelectronics and Photonics, pp.45~50 (2007)
27. G. Ezhilarasu, "A Flexible, Heterogeneously Integrated Wireless Powered System for Bio-Implantable Applications using Fan-Out Wafer Level Packaging", 2018 IEEE International Electron Devices Meeting (IEDM), pp.29~37 (2018)
28. Yong-Rae Jang, "Fabrication of solderable intense pulsed light sintered hybrid copper for flexible conductive electrodes", Scientific Reports, 11(1), pp.14551~ (2021), Springer Science and Business Media LLC[DOI]
29. S. H. Kim, "Recent Progress in Soldering Materials", pp.7~37 (2017), Recent Progress in Soldering Materials
30. V. Zardetto, "Substrates for flexible electronics: A practical investigation on the electrical, film flexibility, optical, temperature, and solvent resistance properties", Journal of Polymer Science Part B:Polymer Physics, 49(9), pp.638~648 (2011)
31. A. O. Ogunjimi, "A review of the impact of conductive adhesive technology on interconnection", Journal of Electronics Manufacturing, 2(3), pp.109~118 (1992)
32. D. W. K. Eikelboom, "Conductive adhesives for low-stress interconnection of thin back-contact solar cells", Conference Record of the Twenty Ninth IEEE Photovoltaic Specialists Conference, pp.403~406 (2002)
33. Y. Fu, "Spatial distribution of metal fillers in isotropically conductive adhesives", Journal of Electronic Materials, 30, pp.866~871 (2001)
34. C. Kwon, "Self‐Bondable and Stretchable Conductive Composite Fibers with Spatially Controlled Percolated Ag Nanoparticle Networks: Novel Integration Strategy for Wearable Electronics", Advanced Functional Materials, 30(49), pp.2005447~ (2020)
35. D. S. Melchert, "Flexible Conductive Composites with Programmed Electrical Anisotropy Using Acoustophoresis", Advanced Materials Technologies, 4(12), pp.1900586~ (2019)
36. Y. Li, "Recent advances of conductive adhesives as a lead-free alternative in electronic packaging: Materials, processing, reliability and applications", Materials Science and Engineering: R: Reports, 51(1), pp.1~35 (2006)
37. Fan-Long Jin, "Synthesis and application of epoxy resins: A review", Journal of Industrial and Engineering Chemistry, 29, pp.1~11 (2015), 한국공업화학회[DOI]
38. H. Wei, "Adhesion and cohesion of epoxy-based industrialcomposite coatings", Composites Part B : Engineering, 193, pp.108035~ (2020)
39. J. H. Choi, "Fabrication and Performance Evaluation of Highly Sensitive Flexible Strain Sensors with Aligned Silver Nanowires", Micromachines(Basel), 11(2), pp.156~ (2020)
40. E. L. Warrick, "Crystallinity and orientation in silicone rubber. II. Physical measurements", Journal of Polymer Science, 27(115), pp.19~38 (1958)
41. H. M. Jeong, "Shape memory polyurethane containing mesogenic moiety", Journal of Materials Science, 35, pp.279~283 (2000)
42. W. Zhou, "Novel heat‐conductive composite silicone rubber", Journal of Applied Polymer Science, 104(4), pp.2478~2483 (2007)
43. T. K. Chen, "Glass Transition Behaviors of a Polyurethane Hard Segment based on 4,4‘-Diisocyanatodiphenylmethane and 1,4-Butanediol and the Calculation of Microdomain Composition", Macromolecules, 30(17), pp.5068~5074 (1997)
44. M. D. Damaceanu, "Thin polyimide films for dielectric interlayer application", IEEE 2009 International Semiconductor Conference, pp.351~354 (2009)
45. X. Liu, "Correlation between hydrogen‐bonding interaction and mechanical properties of polyimide fibers", Polymers for Advanced Technologies, 20(4), pp.362~366 (2009)
46. Y. Yin, "On the Development of Naphthalene-Based Sulfonated Polyimide Membranes for Fuel Cell Applications", Polymer Journal, 38, pp.197~219 (2006)
47. J. S. Park, "Flexible full color organic light-emitting diode display on polyimide plastic substrate driven by amorphous indium gallium zinc oxide thin-film transistors", Applied Physics Letters, 95, pp.013503~ (2009)
48. V. E. Ogbonna, "A review on polyimide reinforced nanocomposites for mechanical, thermal, and electrical insulation application:Challenges and recommendations for future improvement", Polymer Bulletin, 79, pp.663~695 (2022)
49. P. Vijayan P., "Elastomer", thermoplastic modified epoxy nanocomposites: The hybrid effect of ‘micro’ and ‘nano’scale, 2017, pp.116, 1~29
50. F. Yakuphanoglu, "Electromagnetic interference shielding properties of nanocomposites for commercial electronic devices", Microsystem Technologies, 21, pp.2397~2405 (2015)
51. H. P. Wu, "High conductivity of isotropic conductive adhesives filled with silver nanowires", International journal of adhesion and adhesives, 26(8), pp.617~621 (2006)
52. M. J. Yim, "Review of Recent Advances in Electrically Conductive Adhesive Materials and Technologies in Electronic Packaging", Journal of Adhesion Science and Technology, 22(14), pp.1593~1630 (2008)
53. 김명진, "Synthesis of Silver Nanowires by Reduction of Silver-Pyridine Complexes", Bulletin of the Korean Chemical Society, 33(5), pp.1762~1764 (2012), 대한화학회[DOI]
54. M. I. Talukdar, "Conductivity studies on silver oxide", Solid State Communications, 7(2), pp.309~310 (1969)
55. S. J. Raab, "Thermal and Electrical Conductivity of 99.9% Pure Copper Processed via Selective Electron Beam Melting", Advanced Engineering Materials, 18(9), pp.1661~1666 (2016)
56. J. G. Cook, "The thermal conductivity and electrical resistivity of gold from 80 to 340 K", Canadian Journal of Physics, 48(3), pp.254~263 (1970)
57. M. T. S. Nair, "Chemically deposited copper oxide thin films: structural, optical and electrical characteristics", Applied Surface Science, 150(1), pp.143~151 (1999)
58. C. W. Corti, "Commercial aspects of gold applications: from materials science to chemical science", Gold Bulletin, 37, pp.20~26 (2004)
59. S. Simaafrookhteh, "Stochastic Microstructure Reconstruction of a Binder", Carbon Fiber, Journal of The Electrochemical Society, pp.2019, 166(7)[DOI]
60. D. Dasgupta, "Electrical conductivity of amorphous carbon and amorphous hydrogenated carbon", Philosophical Magazine B, 63(6), pp.1255~1266 (1991)
61. F. H. Gojny, "Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube", epoxy composites, 2006, pp.47(6), 2036~2045
62. Yen-Huei Lai, "4.2: Study of ACF Bonding Technology in Flexible Display Module Packages", SID Symposium Digest of Technical Papers, 46(1), pp.12~15 (2015), Wiley[DOI]
63. M. J. Rizvi, "The effect of curing on the performance of ACF bonded chip‐on‐flex assemblies after thermal ageing", Soldering & Surface Mount Technology, 17(2), pp.40~48 (2005)
64. M. Takeichi, "19.2: Invited Paper: History of ACF Development and New Solutions", SID Symposium Digest of Technical Papers, 39(1), pp.244~248 (2008)
65. A. Tolvgard, "A reliable and environmentally friendly packaging technology-flip chip joining using anisotropically conductive adhesive", Proceedings of 3rd International Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing, pp.19~26 (1998)
66. M. Catchpole, "E-Textile Seam Crossing with Screen Printed Circuits and Anisotropic Conductive Film", Multidisciplinary Digital Publishing Institute Proceedings, 32(1), pp.16~ (2019)
67. J. H. Byeon, "A Study on the Magnetic Dispersion of the Conductive Particles of Anchoring Polymer-Layer Anisotropic Conductive Films and Its Fine Pitch Interconnection Properties", IEEE Transactions on Components, Packaging and Manufacturing Technology, 9(7), pp.1235~1243 (2019)
68. J. H. Ahn, "Electrical evaluations of anisotropic conductive film manufactured by electrohydrody-namic ink jet printing technology", Organic Electronics, 78, pp.105561~ (2020)
69. R. Niu, "Self-Healing Flexible Conductive Film by Repairing Defects via Flowable Liquid Metal Droplets", Micromachines(Basel), 10(2), pp.113~ (2019)
70. M. Hoppe, "Microscopic Methods in Metals", pp.7~28 (1986)
71. S. Carnevali, "Unsteady aspects of sodium–water–air reaction", Chemical Engineering Research and Design, 91(4), pp.633~639 (2013)
72. F. M. Kelly, "The Rubidium Transition at ~180° K", Canadian Journal of Physics, 33(1), pp.17~24 (1955)
73. S. Cheng, "Microfluidic Electronics", Lab on a Chip, 12(16), pp.2782~2791 (2012)
74. Q. Xu, "Effect of oxidation on the mechanical properties of liquid gallium and eutectic gallium-indium", Physics of Fluids, 24(6), pp.063101~ (2012)
75. S. Cheng, "Microfluidic stretchable RF electronics", Lab on a Chip, 10(23), pp.3227~3234 (2010)