Effects of Nano-sized Diamond on Wettability and Interfacial Reaction for Immersion Sn Plating
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Immersion Sn plating was produced on Cu foil by distributing nano-sized diamonds (ND). The ND distributed on the coating surface broke the continuity of Sn-oxide layer, therefore leading to penetrate the molten solder through the oxide and retarding the wettability degradation during a reflow process. Furthermore, the ND in the Sn coating played a role of diffusion barrier for Sn atoms and decreased the growth rate of intermetallic compound (Cu6Sn5) layer during the solid-state aging. The study confirmed the importance of ND to improve the wettability and reliability of the Sn plating. Complete dispersion of the ND within the immersion Sn plating needs to be further developed for the electronic packaging applications.
Abstract
Immersion Sn plating was produced on Cu foil by distributing nano-sized diamonds (ND). The ND distributed on the coating surface broke the continuity of Sn-oxide layer, therefore leading to penetrate the molten solder through the oxide and retarding the wettability degradation during a reflow process. Furthermore, the ND in the Sn coating played a role of diffusion barrier for Sn atoms and decreased the growth rate of intermetallic compound (Cu6Sn5) layer during the solid-state aging. The study confirmed the importance of ND to improve the wettability and reliability of the Sn plating. Complete dispersion of the ND within the immersion Sn plating needs to be further developed for the electronic packaging applications.
참고문헌 (14)
- P. T. Vianco, "An Overview of Surface Finishes and Their Role in Printed Circuit Board Solderability and Solder Joint Performance", Circuits World, 25, pp.6~ (1998)
- M. Arra, "Study of Immersion Silver and Tin PCB Surfaces in Lead-free Solder Applications", J. Electron. Mater., 33(9), pp.977~ (2004)
- S. Lamprecht, "An Investigation of the Recommended Immersion Tin Thickness for Lead-free Soldering", Circuits World, 31, pp.15~ (2005)
- C. M. Chan, "Intermetallic Compound Formation and Solderability for Immersion Tin", Circuits World, 32(3) (2006)
- Chong-Hee Yu, "The Observation of Intermetallic Compound Microstructure Under Sn Whisker in Lead-free Finish", 마이크로전자 및 패키징학회지, 16(2), pp.27~31 (2009), 한국마이크로전자및패키징학회
- S. Schroeder, "Superior, Whisker-reduced Immersion Tin Technology", Circuits World, 31, pp.42~ (2005)
- O. Shenderova, "Carbon Nanomaterials", pp.175~199 (2006), CRC Press
- G. K. Burkat, "Application of Ultrafine- Dispersed Diamonds in Electroplating", Phys. Solid State, 46(4), pp.703~ (2004)
- I. K. Hui, "Wetting Analysis of Leadless Chips in Surface Mount Technology", Int. J. Adv. Technol., 16(9), pp.675~ (2000)
- S. Min, "A New Laser Flash System for Measurement of the Thermophysical Properties", Thermochim. Acta, 455, pp.46~ (2007)
- L. Kehoe, "Application of the Laser Flash Diffusivity Method to Thin High Thermal Conductivity Materials", Microsyst. Technol., 5(1), pp.18~ (1998)
- D. D. Hillman, "Characterization of Tin Oxidation Products Using Sequential Electrochemical Reduction Analysis (SERA)", Soldering & SMT, 18(3), pp.31~ (2006)
- A. N. GladkiÏ, "Effect of Technological Parameters on the Structure and Surface Morphology of Carbon Films", Technical Physics, 45(5), pp.656~ (2000)
- W. J. Choi, "Tin Whiskers Studied by Synchrotron Radiation Scanning X-ray Micro-diffraction", Acta Materialia, 51, pp.6253~ (2003)