Silicon 기반 IC 디바이스에서의 층간 절연막 특성 분석 연구
Raman Spectroscopy Analysis of Inter Metallic Dielectric Characteristics in IC Device
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Along the few nano sizing dimensions of integrated circuit (IC) devices, acceptable interlayer material for design is inevitable. The interlayer which include dielectric, interconnect, barrier etc. needs to achieve not only electrical properties, but also mechanical properties for endure post manufacture process and prolonging life time. For developing intermetallic dielectric (IMD) the mechanical issues with post manufacturing processes were need to be solved. For analyzing specific structural problem and material properties Raman spectroscopy was performed for various researches in Si semiconductor based materials. As improve of the laser and charge-coupled device (CCD) technology the total effectiveness and reliability was enhanced. For thin film as IMD developed material could be analyzed by Raman spectroscopy, and diverse researches of developing method to analyze thin layer were comprehended. Also In-situ analysis of Raman spectroscopy is introduced for material forming research.
Abstract
Along the few nano sizing dimensions of integrated circuit (IC) devices, acceptable interlayer material for design is inevitable. The interlayer which include dielectric, interconnect, barrier etc. needs to achieve not only electrical properties, but also mechanical properties for endure post manufacture process and prolonging life time. For developing intermetallic dielectric (IMD) the mechanical issues with post manufacturing processes were need to be solved. For analyzing specific structural problem and material properties Raman spectroscopy was performed for various researches in Si semiconductor based materials. As improve of the laser and charge-coupled device (CCD) technology the total effectiveness and reliability was enhanced. For thin film as IMD developed material could be analyzed by Raman spectroscopy, and diverse researches of developing method to analyze thin layer were comprehended. Also In-situ analysis of Raman spectroscopy is introduced for material forming research.
참고문헌 (36)
- L. Wilson, "International technology roadmap for semiconductors (ITRS)", Semiconductor Industry Association, ~ (2013)
- K. Maex, "Low dielectric constant materials for microelectronics", J. Appl. Phys, 93(11), pp.8793~ (2003)
- A. Grill, "Progress in the development and understanding of advanced low k and ultralow k dielectrics for very largescale integrated interconnects-State of the art", Appl. Phys. Rev, 1(1), pp.011306~ (2014)
- 김은솔, "웨이퍼 레벨 3D Integration을 위한 Ti", Cu CMP 공정 연구, 2012, pp.19(3), 37~41[DOI]
- J. C. Lam, "Evidence of ultra-low-k dielectric material degradation and nanostructure alteration of the Cu", ultra-low-k interconnects in time-dependent dielectric breakdown failure, 2013, pp.102(2), 022908~
- W. Lin, "Effects of Cu surface roughness on TDDB for direct polishing ultra-low k dielectric Cu interconnects at 40nm technology node and beyond", Microelectron. Eng, 92, pp.115~ (2012)
- M. G. Albrecht, "Materials issues with thin film hydrogen silsesquioxane low K dielectrics", J. Electrochem. Soc, 145(11), pp.4019~ (1998)
- Hsiang-Chen Hsu, "An investigation on dicing 28-nm node Cu", low-k wafer with a Picosecond Pulse Laser, 2014, pp.21(4), 63~68[DOI]
- N. Fainer, "Low-k dielectrics on base of silicon carbon nitride films", Surf. Coat. Technol, 201(22), pp.9269~ (2007)
- Y. -L. Cheng, "Effect of annealing temperature on electrical and reliability characteristics of HfO 2", porous low-k dielectric stacks, 2016, pp.162, 34~
- J. C. K. Lam, "Vibrational spectroscopy of low-k", ultra-low-k dielectric materials on patterned wafers, 2011, pp.29(5), 051513~
- M. Y. Huang, "UV-Raman Microscopy on the Analysis of Ultra-Low-K Dielectric Materials on Patterned Wafers", Adv. Mater. Res, 740, pp.680~ (2013)
- I. De Wolf, "Micro-Raman spectroscopy to study local mechanical stress in silicon integrated circuits", Semicond. Sci. Technol, 11(2), pp.139~ (1996)
- I. De Wolf, "High-resolution stress and temperature measurements in semiconductor devices using micro-Raman spectroscopy", International Symposium on Photonics and Applications (ISPA), pp.239~ (1999), International Society for Optics and Photonics
- E. Anastassakis, "Strain and piezoelectric effects on the phonon frequencies in heterostructures", Solid State Commun, 84(1-2), pp.47~ (1992)
- S. Tkachev, "Micro-Raman spectroscopy and X-ray diffraction studies of atomic-layer-deposited ZrO2 and HfO2 thin films", J. Mater. Sci, 40(16), pp.4293~ (2005)
- N. Everall, "Depth profiling with confocal Raman microscopy, Part I", Spectroscopy-springfield Then Eugene Then Duluth-, 19, pp.22~ (2004)
- N. J. Everall, "Modeling and measuring the effect of refraction on the depth resolution of confocal Raman microscopy", Appl. Spectrosc, 54(6), pp.773~ (2000)
- N. J. Everall, "Confocal Raman microscopy: why the depth resolution and spatial accuracy can be much worse than you think", Appl. Spectrosc, 54(10), pp.1515~ (2000)
- N. Everall, "Depth profiling with confocal Raman microscopy, part II", Spectroscopy-springfield Then Eugene Then Duluth-, 19, pp.16~ (2004)
- F. Fan, "In situ UV Raman spectroscopic study on the synthesis mechanism of AlPO-5", Angew. Chem. Int. Ed. Engl, 48(46), pp.8743~ (2009)
- N. Y. Kwak, "In-line Monitoring of Grain Size Distribution of Channel Poly Si used in 3D NAND Flash Memory Devices using Multiwavelength Raman Spectroscopy", MRS Adv, 1(05), pp.339~ (2016)
- H. Ming, "Cu penetration into low-k dielectric during deposition and bias-temperature stress", Appl. Phys. Lett, 97(25) (2010)
- J. N. Myers, "Plasma Treatment Effects on Molecular Structures at Dense and Porous Low-k SiCOH Film Surfaces and Buried Interfaces", J. Phys. Chem. C, 119(39), pp.22514~ (2015)
- X. Zhang, "Probing the molecular structures of plasma-damaged and surface-repaired low-k dielectrics", PCCP, 17(39), pp.26130~ (2015)
- M. Y. Huang, "Enhancement of Raman signals from low-k dielectrics with angle-resolved light scattering on nanostructure patterned Cu", low-k interconnects of IC device, 2015, pp.33(2), 020603~
- D. Chandler-Horowitz, "High-accuracy, midinfrared (450 cm−1 <= omega <= 4000 cm−1) refractive index values of silicon", J. Appl. Phys, 97(12), pp.3526~ (2005)
- F. D'Amico, "Oxidative damage in DNA bases revealed by UV resonant Raman spectroscopy", Analyst, 140(5), pp.1477~ (2015)
- F. Fan, "UV Raman spectroscopic studies on active sites and synthesis mechanisms of transition metalcontaining microporous and mesoporous materials", Acc. Chem. Res, 43(3), pp.378~ (2009)
- J. W. Ager, "Quantitative measurement of residual biaxial stress by Raman spectroscopy in diamond grown on a Ti alloy by chemical vapor deposition", Phys. Rev. B, 48(4), pp.2601~ (1993)
- H. Yamin, "Experiments and results of Raman and FTIR complementary vibrational spectroscopy for IC reliability failure analysis", Proceedings of the 21th International Symposium on the Physical and Failure Analysis of Integrated Circuits(IPFA), pp.291~ (2014), IEEE
- D. D. Wang, "Failure mechanism analysis and process improvement on time-dependent dielectric breakdown of Cu", ultralow-k dielectric based on complementary Raman and FTIR spectroscopy study, 2014, pp.4(7), 077124~
- Y. Guhel, "In situ Raman characterization of CeO2 thin films sputtered on (111) Si in order to optimize the post growth annealing parameters", Microelectron. Eng, 118, pp.29~ (2014)
- K. Nishida, "In-situ monitoring of PE-CVD growth of TiO 2films with laser Raman spectroscopy", Appl. Surf. Sci, 159, pp.143~ (2000)
- H. Y. H. Chan, "In-situ monitoring of chemical vapor deposition at ambient pressure by surface-enhanced Raman spectroscopy: Initial growth of tantalum (V) oxide on platinum", J. Am. Chem. Soc, 121(39), pp.9219~ (1999)
- I. Burlacov, "Induction plasma-sprayed photocatalytically active titania coatings and their characterisation by micro-Raman spectroscopy", Surf. Coat. Technol, 201(1), pp.255~ (2006)