고분자 나노 표면의 내스크래치 특성 향상 연구
A Study on Enhanced of Anti-scratch performance of Nanostructured Polymer Surface
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
본고에서는 임프린트로 제작된 저반사 필름의 내스크래치 특성 향상을 위해 급속 냉각 방법을 제안하였다. 냉각시간을 변수로 하여 기계적인 특성과 광학적 특성에 대한 영향을 평가하였다. 냉각 시간에 따른 기계적 특성 평가 결과 냉각 시간이 증가할수록 내스크래치 특성이 향상되는 거동을 보였지만, 광학적 특성 평가 결과 냉각 시간이 증가할수록 스크래치 발생 부분의 반사율이 매우 증가하는 경향을 보였다. 이를 통하여 냉각 시간에 따라 잔류 응력 변화가 발생하고 나노구조 표면 형상에 영향을 주어 내스크래치 특성 및 광학적 특성에 영향을 줄 수 있음을 확인하였다.
Abstract
In this study, rapid cooling method was proposed to improve the anti-scratch performance of anti-reflection film fabricated by nanoimprint lithography. Effects of cooling time on the mechanical properties and optical properties were evaluated. Pencil hardness measurements showed that anti-scratch performance enhanced as the cooling time increased while characterization on the optical property showed that reflectance on scratch increased as the cooling time increased. Therefore, it was concluded that the anti-scratch performance and optical properties are highly influenced by the cooling time. The observed results explained in terms of residual stress and free volume in polymeric materials.
참고문헌 (19)
- A. R. Parker, "Biomimetics of photonic nanostructures", Nature nanotechnology, 2(6), pp.347~ (2007)
- H. K. Raut, "Multiscale ommatidial arrays with broadband and omnidirectional antireflection and antifogging properties by sacrificial layer mediated nanoimprinting", ACS nano, 9(2), pp.1305~ (2015)
- D. G. Choi, "Fabrication of Synthetic Moth-Eye Anti-Reflection Structure Using Nanoimprint(in Korean)", journal of The Korean Society of Mechanical Engineers spring conference, 13 (2008)
- S. R. Kennedy, "Porous broadband antireflection coating by glancing angle deposition", Applied optics, 42(22), pp.4573~ (2003)
- 박형석, "열 나노임프린트 리소그래피를 위한 패턴의 결함 향상에 관한 실험적 연구", 전기학회논문지 C권, 55(5(C)), pp.223~230 (2006), 대한전기학회
- Y. Hirai, "Study of the resist deformation in nanoimprint lithography", Journal of Vacuum Science & Technology B, 19(6), pp.2811~ (2001)
- N. Tohge, "Fine-patterning on glass substrates by the solgel method", Journal of non-crystalline solids, 100(1-3), pp.501~ (1988)
- E. Farm, "Selectivearea atomic layer deposition using poly (methyl methacrylate)films as mask layers", J. Phys. Chem. C, 112, pp.15791~ (2008)
- S. Dhuey, "Obtaining nanoimprint template gratings with 10 nm halfpitch by atomic layer deposition enabled spacer double patterning", Nanotechnology, 24(10), pp.105303~ (2013)
- D. C. Miller, "The mechanical robustness of atomic-layer-and molecular-layer-deposited coatings on polymer substrates", Journal of Applied Physics, 105(9), pp.093527~ (2009)
- S. O. Cho, "Surface hardening of poly (methyl methacrylate) by electron irradiation", Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 237(3), pp.525~ (2005)
- O. A. Hasan, "An investigation of the yield and postyield behavior and corresponding structure of poly (methyl methacrylate)", Journal of polymer science part B: polymer physics, 31(2), pp.185~ (1993)
- L. C. E. Struik, "Orientation effects and cooling stresses in amorphous polymers", Polymer Engineering & Science, 18(10), pp.799~ (1978)
- K. Hagiwara, "Studies on the free volume and the volume expansion behavior of amorphous polymers", Radiation Physics and Chemistry, 58(5), pp.525~ (2000)
- A. Siegmann, "Softening temperature of glassy polymers as affected by residual stresses", Polymer Engineering & Science, 19(3), pp.223~ (1979)
- 조원경, "액적의 구름저항에 대한 정접촉각 및 거칠기의 영향", 마이크로전자 및 패키징학회지, 23(1), pp.23~28 (2016), 한국마이크로전자및패키징학회
- L. J. Broutman, "Impact strength of polymers: 1. The effect of thermal treatment and residual stress", Polymer Engineering & Science, 16(2), pp.74~ (1976)
- H. K. Raut, "Anti-reflective coatings: A critical, in-depth review", Energy & Environmental Science, 4(10), pp.3779~ (2011)
- 여나은, "반사방지 나노구조의 성형성과 광학적 특성에 대한 이형 온도의 영향", 마이크로전자 및 패키징학회지, 23(2), pp.91~96 (2016), 한국마이크로전자및패키징학회