캐릭터 인형용 밀착커버 패턴개발 프로세스의 가이드라인
Guidelines of 2D Pattern Development Process for 3D Fitted Cover of Character Toys
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The industry of character toys is increasing and new characters are constantly being developed. However, the development of 2D cover patterns for toys is time-consuming due to frequent pattern modifications made through trial and error. Studies are now underway to obtain 2D clothing patterns from 3D body data, however, little research has been done on 2D pattern of character toys. This study suggests efficient guidelines to develop 2D cover patterns with a reasonable accuracy and processing time. Two 3D models of a dog and rabbit were used to develop 2D cover patterns. Independent variables of this study are set as 3 levels of triangle area (small, medium, and large) that influence the efficacy of 3D and 2D pattern development. The determination of the appropriate triangular area was based on the area and shape change of the 2D pattern. A medium or large triangle area was shown to be suitable for a character dog with a smooth curved surface. However, the appropriate triangle area was small if the characteristics of the curved surface are complicated as in the case of rabbit. The head of a dog (a double-curved surface) and the curved forepaw of a rabbit (a triangular area) should be small when the characteristics of the curved surface (such as the hind leg of a rabbit having a large convex surface and a small surface area) are complicated. Grouping by 3D surface characteristics could be a suitable guideline for the triangle area selection.
Abstract
The industry of character toys is increasing and new characters are constantly being developed. However, the development of 2D cover patterns for toys is time-consuming due to frequent pattern modifications made through trial and error. Studies are now underway to obtain 2D clothing patterns from 3D body data, however, little research has been done on 2D pattern of character toys. This study suggests efficient guidelines to develop 2D cover patterns with a reasonable accuracy and processing time. Two 3D models of a dog and rabbit were used to develop 2D cover patterns. Independent variables of this study are set as 3 levels of triangle area (small, medium, and large) that influence the efficacy of 3D and 2D pattern development. The determination of the appropriate triangular area was based on the area and shape change of the 2D pattern. A medium or large triangle area was shown to be suitable for a character dog with a smooth curved surface. However, the appropriate triangle area was small if the characteristics of the curved surface are complicated as in the case of rabbit. The head of a dog (a double-curved surface) and the curved forepaw of a rabbit (a triangular area) should be small when the characteristics of the curved surface (such as the hind leg of a rabbit having a large convex surface and a small surface area) are complicated. Grouping by 3D surface characteristics could be a suitable guideline for the triangle area selection.
참고문헌 (19)
- "Patternmaking: Past to present" (2005)[URL]
- (2017)[URL]
- 정연희, "인체의 3차원 스캔 데이터를 이용한 밀착 바디 슈트 개발", 한국생활과학회지, 15(3), pp.481~490 (2006), 한국생활과학회
- 정연희, "3D 스캔 데이터를 활용한 밀착 패턴원형 개발", 한국의류학회지, 30(1), pp.157~166 (2006), 한국의류학회
- 정연희, "동작시 3D 정보를 이용한 2D 패턴 전개 및 신축성 원단의 신장률을 고려한 사이클 팬츠 개발", 한국생활과학회지, 19(3), pp.555~563 (2010), 한국생활과학회
- Yeonhee Jeong, "3D pattern construction and its application to tight-fitting garments for comfortable pressure sensation", Fibers and Polymers, 7(2), pp.195~202 (2006), Springer Nature[DOI]
- 김미영, "지방자치단체 캐릭터의 실태조사와 경향분석을 통한 개선방안 연구", 디자인학연구, 18(3), pp.25~34 (2005), 한국디자인학회
- Kim, S. M., "Study on the automatic garment pattern generation for the development of three dimensional apparel CAD system", Journal of the Korean Fiber Society, 36(9), pp.489~500 (1999)
- Soyoung Kim, "3D pattern development of tight-fitting dress for an asymmetrical female manikin", Fibers and Polymers, 11(1), pp.142~146 (2010), Springer Nature[DOI]
- (2017)[URL]
- 이희란, "3D 레플리카를 이용한 여성용 밀착 상의의 패턴 전개 방법", 한국의류학회지, 29(7), pp.1008~1017 (2005), 한국의류학회
- Heeran Lee, "Development of 3D patterns for functional outdoor pants based on skin length deformation during movement", International Journal of Clothing Science and Technology, 29(2), pp.148~165 (2017), Emerald[DOI]
- (2015)[URL]
- (2017)[URL]
- (2014)[URL]
- "3-D Human Body Shape of Korean Standard Body Shape" (2010)[URL]
- Watanabe, K., "Threedimensional analysis of upper torsos of elderly Japanese women for clothing design", Journal of Home Economics of Japan, 51(11), pp.1045~1055 (2000)[DOI]
- 오염군, "여성용 바지 패턴 설계를 위한 3차원 밀착 패턴 여유량 부가와 레플리카 조합 방법", 한국의류학회지, 36(4), pp.443~455 (2012), 한국의류학회
- 윤미경, "3차원 인체 형상을 이용한 20대 여성의 하반신 전개패턴에 관한 연구", 한국의류학회지, 31(5), pp.692~704 (2007), 한국의류학회