3차원 스캔 기술과 니트 소재의 신축성을 적용한 밀착형 스포츠웨어 상의 설계
Technical Design of Tight Upper Sportswear based on 3D Scanning Technology and Stretch Property of Knitted Fabric
0
조회
0
다운로드
26
인용
0
참고문헌
키워드
초록
This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20’s. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2%for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.
Abstract
This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20’s. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2%for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.
참고문헌 (18)
- 최신애, "3차원 파라메트릭 모델을 활용한 20대 성인 여성용 브리프 패턴 설계", 한국의류산업학회지, 12(5), pp.642~649 (2010), 한국의류산업학회
- 최영림, "Surface Flattening criterion of Female's Upper Front Shell Using Grid Method", 한국의류학회지, 32(12), pp.1825~1836 (2008), 한국의류학회
- 도월희, "3차원 인체데이터에 의한 20대 성인남성의 상반신 체표변화 분석-모터사이클복 패턴설계시 적용을 중심으로", 한국의류학회지, 32(4), pp.530~541 (2008), 한국의류학회
- 정연희, "Triangle Simplification에 의한 3D 인체형상분할과 삼각조합방법에 의한 2D 패턴구성", 한국의류학회지, 29(9,10), pp.1359~1368 (2005), 한국의류학회
- 정연희, "동작시 3D 정보를 이용한 2D 패턴 전개 및 신축성 원단의 신장률을 고려한 사이클 팬츠 개발", 한국생활과학회지, 19(3), pp.555~563 (2010), 한국생활과학회
- 김혜진, "3차원 인체 스캔 데이터를 활용한 한국 중년여성 토르소 원형 설계", 한국의류산업학회지, 13(4), pp.600~613 (2011), 한국의류산업학회
- Kim, S. M., "Garment pattern generation from body scan data", Computer-Aided Design, 35(7), pp.611~618 (2003)
- 5th Size Korea Technical Report, "Korean Agency for Technology and Standards", The ministry of Knowledge Economy, Korean Agency for Technology and Standards, ~ (2005)
- McCartney, J., "The flattening of triangulated surfaces incorporating darts and gussets", Computer-Aided Design, 31(4), pp.249~260 (1999)
- Park, E. J., "Clothing ergonomical analysis of the upper body types and design of the basic bodice pattern for Korean young men", 박사, pp.1993
- Park, S. J., "3D body scan data flattening for garment pattern using CAD system", Proceeding of the Korean Society of Precesion Engineering Conference, pp.303~304 (2007)
- 박순지, "3차원 인체 스캔 데이터를 활용한 Hip-hugger 의류용 벨트 패턴 설계", 한국의류산업학회지, 10(5), pp.652~659 (2008), 한국의류산업학회
- 박순지, "밀착의형 3차원 파라메트릭 모델을 활용한 상반신 원형의 다트 및 절개분리선 설정에 관한 연구", 한국의류산업학회지, 12(4), pp.467~476 (2010), 한국의류산업학회
- 박순지, "힙 허거(hip-hugger)형 타이트 스커트 및 라운드 벨트 패턴 제도법 개발", 한국의류산업학회지, 13(5), pp.661~671 (2011), 한국의류산업학회
- Park, S. J., "Development of theory and auto CAD program for designing the individual bodice pattern from 3D scanning data of human body", Journal of Asian Regional Home Economics, 10(4), pp.216~225 (2003)
- 손부현, "3차원 인체형상 스캔데이터를 이용한 남자 바지패턴 설계", Family and Environment Research, 46(9), pp.137~146 (2008), 대한가정학회
- Wang, C. C. L., "Surface area flattening based on energy model", Computer-Aided Design, 34(11), pp.823~833 (2002)
- Wang, C. C. L., "Design automation for customized apparel products", Computer-Aided Design, 37(7), pp.675~691 (2005)