3D 핸디형 스캐너와 3D 프린팅 기술 기반 드레이핑용 커스텀 메이드 드레스폼 개발
Development of a Custom-Made Dress Form for Draping Based on 3D Handheld Scanners and 3D Printing Technology
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study aimed to develop a a custom-made dress form for draping using a live model’s 3D body scan obtained from an entry-level 3D handheld scanners, 3D modeling software and 3D printing technology. A female subject was recruited whose body size fell under the normal (N) body shape criteria suggested by KS K 0051. First, the handheld scanner reduced the length of the legs in scanning, but most of the scanning operations between the neck and crotch lev- els were conducted accurately. Therefore, this study was designed to develop a torso dress form. The full body 3D scan was edited into a torso shape using ZBrush® software. Using Rhinoceros® and Materialise's Magics software, a 3D body scan was modeled so that the user could fit two types of mannequin stands (one with a neck fixation from above and one with an insert from below) to the dress form. The body scan was divided into 9 pieces to fit the printable size of the Strata- sys 3D printer Fortus 250mc, and the cross-sectional distance from the center to the periphery was downsized by 2 mm. After outputting the dress form scan file with a 3D printer, the dress form was manufactured by the first covering it with a 4 oz nonwoven pad and the second covering with a single jersey material.
Abstract
This study aimed to develop a a custom-made dress form for draping using a live model’s 3D body scan obtained from an entry-level 3D handheld scanners, 3D modeling software and 3D printing technology. A female subject was recruited whose body size fell under the normal (N) body shape criteria suggested by KS K 0051. First, the handheld scanner reduced the length of the legs in scanning, but most of the scanning operations between the neck and crotch lev- els were conducted accurately. Therefore, this study was designed to develop a torso dress form. The full body 3D scan was edited into a torso shape using ZBrush® software. Using Rhinoceros® and Materialise's Magics software, a 3D body scan was modeled so that the user could fit two types of mannequin stands (one with a neck fixation from above and one with an insert from below) to the dress form. The body scan was divided into 9 pieces to fit the printable size of the Strata- sys 3D printer Fortus 250mc, and the cross-sectional distance from the center to the periphery was downsized by 2 mm. After outputting the dress form scan file with a 3D printer, the dress form was manufactured by the first covering it with a 4 oz nonwoven pad and the second covering with a single jersey material.
참고문헌 (12)
- Chang, H. K., "The need of draping dress forms for fashion design", Fashion Information and Technology, 13, pp.81~85 (2016)
- 도월희, "3D 디지털 기술을 활용한 시니어 남성 기성복 피팅용 드레스폼 개발에 관한 연구", 한국의류산업학회지, 20(6), pp.722~732 (2018), 한국의류산업학회[DOI]
- ISO 20685-1:3-D scanning methodologies for internationally compatible anthropometric databases, "International Organization for Standardization", ~ (2018)
- 김수아, "3차원 인체 형상을 이용한 실버 여성 패션 산업용 인대 모형 개발", 복식문화연구, 18(1), pp.80~92 (2010), 복식문화학회[DOI]
- 구미지, "20대 여성의 표준체형과 인대 적합성에 관한 연구", 한국의류산업학회지, 7(6), pp.601~608 (2005), 한국의류산업학회
- KS K0051:2009 - Sizing systems for female adults’ garments, "Korean Agency for Technology and Standards", Korean Standards Association, ~ (2019)
- 오설영, "3D 프린터를 이용한 여성용 인대 제작 연구", 복식문화연구, 24(6), pp.725~742 (2016), 복식문화학회[DOI]
- 박진아, "국내 여성 패션모델의 3차원 가상인체 모델링을 통한 토르소형 인대 개발과 그 특성 분석", 복식, 65(2), pp.157~175 (2015), 한국복식학회[DOI]
- 박선미, "3차원 인체 스캔 데이터의 정확도 검증에 관한 연구 - Cyberware사의 WB4 스캐너를 중심으로 -", 한국의상디자인학회지, 14(1), pp.81~96 (2012), 한국의상디자인학회
- 서동애, "3D 인체 스캔 데이터를 활용한 체형별 인대모형 개발에 관한 연구", 한국콘텐츠학회 논문지, 12(9), pp.136~145 (2012), 한국콘텐츠학회[DOI]
- Sibei Xia, "Comparison of different body measurement techniques: 3D stationary scanner, 3D handheld scanner, and tape measurement", The Journal of The Textile Institute, 110(8), pp.1103~1113 (2018), Informa UK Limited[DOI]
- Zhang, L., "Evaluation of the accuracy of 3D handheld scanner - Focused on mannequin scans", Proceedings of the 2021 Spring Conference of Korean Society of Clothing and Textiles, pp.266~ (2021)