곡선 절개형 바지의 패턴사이즈 변형방법과 3D 가상착의곡면
Methods to determine the size of pant patterns with curved design lines and their three dimensional construction using 3D virtual fitting
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
With the advent of smart clothing for health care and sports, the sophisticated designs with curved seams are drawing attention. One of the problems in those clothing is to determine the design curves in 2D pattern, such that it corresponds to the lines on the intended 3D body. Moreover, the difficulty increases when the original pattern needs to be changed for various sizes and body types. We compare two methods of pattern enlargement in this paper: one is the offset/projection type, and the other is the split grading type. For the enlarged pattern with offset/projection type, the 3D surface offset was first adopted to transform the standard lower body to the target larger size; next, the design lines were projected to the new 3D surface, following which the 3D pattern was developed from the newly transformed 3D surface. In the second method, the enlarged pant patterns were developed by the split grading method. Here, a 3D pattern was developed from the initial body, and then enlarged to the target size by the conventional split grading method. Two feminine pants patterns were examined by 3D virtual fitting. We observed that the 3D offset/projection pants pattern was well fitted, having an evenly distributed surplus, as compared with the sample developed using the split grading method. The difference between the two patterns were apparent at the location where several curved lines merged.
Abstract
With the advent of smart clothing for health care and sports, the sophisticated designs with curved seams are drawing attention. One of the problems in those clothing is to determine the design curves in 2D pattern, such that it corresponds to the lines on the intended 3D body. Moreover, the difficulty increases when the original pattern needs to be changed for various sizes and body types. We compare two methods of pattern enlargement in this paper: one is the offset/projection type, and the other is the split grading type. For the enlarged pattern with offset/projection type, the 3D surface offset was first adopted to transform the standard lower body to the target larger size; next, the design lines were projected to the new 3D surface, following which the 3D pattern was developed from the newly transformed 3D surface. In the second method, the enlarged pant patterns were developed by the split grading method. Here, a 3D pattern was developed from the initial body, and then enlarged to the target size by the conventional split grading method. Two feminine pants patterns were examined by 3D virtual fitting. We observed that the 3D offset/projection pants pattern was well fitted, having an evenly distributed surplus, as compared with the sample developed using the split grading method. The difference between the two patterns were apparent at the location where several curved lines merged.
참고문헌 (35)
- Ashdown, S. P., "Using 3D scans for fit analysis. Journal of Textile and Apparel", Technology and Management, 4(1), pp.1~12 (2004)
- Bye, E., "Fit analysis using live and 3D scan models", International Journal of Clothing Science and Technology, 22(2, pp.3) (2010), 88~100
- 차수정, "3차원 시뮬레이션을 활용한 성인여성용 길 원형 비교 연구 - DC Suite Program을 중심으로 -", 패션 비즈니스, 17(2), pp.63~81 (2013), 한국패션비즈니스학회[DOI]
- Chen, C. M., "Fit evaluation within the made-to-measure process", International Journal of Clothing Science and Technology, 19(2), pp.131~144 (2007)
- 조진숙, "여성 의류 업체의 그레이딩 실태 연구", 한국의상디자인학회지, 4(3), pp.55~64 (2002), 한국의상디자인학회
- Choi, J., "3D skin length deformation of lower body during knee joint flexion for the practical application of functional sportswear", Applied Ergonomics, 48, pp.186~201 (2015)
- Tutorial Super ALPHA : Plus, "YUKA CAD", pp.2015, ⓒYouthhitech
- Daanen, H., "Made-to-measure pattern development based on 3D whole body scans", International Journal of Clothing Science and Technology, 20(1), pp.15~25 (2008)
- Jang, E. Y., "패턴 CAD 활용", pp.254~283 (2000), 교학연구사
- 정연희, "3D 스캔 데이터를 활용한 밀착 패턴원형 개발", 한국의류학회지, 30(1), pp.157~166 (2006), 한국의류학회
- Jeong, Y. H., "3D pattern construction and its application to tight-fitting garments for comfortable pressure sensation", Fibers and Polymers, 7(2), pp.195~202 (2006)
- 정명숙, "인체 부위별 치수증감을 반영한 길 원형 그레이딩에 관한 연구", 한국지역사회생활과학회지, 20(4), pp.571~578 (2009), 한국지역사회생활과학회
- KATS, "성인 여성복의 치수", KATS, ~ (2009)
- 김인혜, "국내 아웃도어웨어 디자인 특성에 관한 연구", 한국패션디자인학회지, 12(1), pp.93~109 (2012), 한국패션디자인학회
- 김남임, "팔 외전 시 몸통의 피부 변화량 분석과 이를 활용한 3D 컴프레션 상의 설계", 한국생활과학회지, 24(5), pp.687~700 (2015), 한국생활과학회
- Kim, S. Y., "3D pattern development of tight-fitting dress for an asymmetrical female manikin", Fibers and Polymers, 11(1), pp.142~146 (2010)
- 김선영, "슬랙스 맞음새 평가를 위한 하반신 체형 유형화에 관한 연구", 패션 비즈니스, 20(2), pp.181~196 (2016), 한국패션비즈니스학회[DOI]
- 구영석, "컴프레션웨어(Compression Wear)의 운동성능 및 근기능에 미치는 영향", 한국염색가공학회지, 23(1), pp.60~68 (2011), 한국염색가공학회
- Lee, H., "Ergonomic Design and its 3D Pattern Development of Outdoor Pants Based on Skin Deformation in dynamic Postures", doctor, pp.2013
- 이효정, "무릎 안전성 향상을 위한 컴프레션 의복의 기능적 디자인 영역 선정과 설계법", 한국생활과학회지, 24(1), pp.97~109 (2015), 한국생활과학회
- 이희란, "3D 레플리카를 이용한 여성용 밀착 상의의 패턴 전개 방법", 한국의류학회지, 29(7), pp.1008~1017 (2005), 한국의류학회
- Lee, H., "Ergonomic mapping of skin deformation in dynamic postures to provide fundamental data for functional design lines of outdoor pants", Fibers and Polymers, 14(12), pp.2197~2201 (2013)
- 이정화, "컴프레션웨어의 디자인과 제품구성요소 분석", 한국의류산업학회지, 16(3), pp.421~433 (2014), 한국의류산업학회
- 이진숙, "3차원 가상착의와 실제착의를 통한 비만여성의 바지 맞음새 비교", 패션 비즈니스, 17(2), pp.33~45 (2013), 한국패션비즈니스학회[DOI]
- 이민정, "CLO 3D 아바타 사이징과 실제인체간의 치수 및 형태 차이 비교 분석", 패션 비즈니스, 16(4), pp.137~151 (2012), 한국패션비즈니스학회
- 이예진, "2D 패턴 축소율과 신축성 소재 특성이 3D 의복 변형에 미치는 영향", 한국생활환경학회지, 19(2), pp.247~258 (2012), 한국생활환경학회[DOI]
- 임지영, "비만체형 여중생의 슬랙스 치수규격 및 그레이딩 증감량 설정에 관한 연구", 한국의류산업학회지, 12(2), pp.194~202 (2010), 한국의류산업학회
- 임지영, "복부비만 중년여성의 슬랙스 패턴 그레이딩에 관한 연구", 한국의류산업학회지, 11(5), pp.771~778 (2009), 한국의류산업학회
- Paek, K. J., "A Study on the Pattern Grading for Men’s Formal Wear", Journal of the Korean Society of Clothing and Textiles, 26(6), pp.843~852 (2002)
- 박진아, "3차원 가상착의 시뮬레이션을 이용한 20~50대 연령별 남성 작업복 점퍼 패턴 설계 및 외관평가", 패션 비즈니스, 16(1), pp.103~120 (2012), 한국패션비즈니스학회
- 신장희, "체형별 신체밀착형 Basic Bodice Block 설계 및 3차원 가상착의평가 - 20대 전반 여성을 중심으로 -", 한국의상디자인학회지, 15(2), pp.1~13 (2013), 한국의상디자인학회
- Shoben, M., "Grading for the Fashion Industry: The Theory and Practice" (2004), LCFS Fashion Media
- Varghese, N., "Fit of Sari Blouse: Influencing Parameters and Assessment", Journal of Textile and Apparel, Technology and Management, 7(4) (2012)
- 오염군, "여성용 바지 패턴 설계를 위한 3차원 밀착 패턴 여유량 부가와 레플리카 조합 방법", 한국의류학회지, 36(4), pp.443~455 (2012), 한국의류학회[DOI]
- Xu, J. H., "A Study on Area Ease Distribution between Body and Garment", Journal of Fiber Bioengineering and Informatics, 2(2), pp.101~107 (2009)