Fit and Pressure Analysis of Cycling Short Sleeve Tops Using a 3D Virtual Garment System
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
This study aims to analyze short sleeve cycling tops from three brands for a change in garment fit and pressuredepending on the static and cycling postures. To this end, it used a 3D virtual garment system to virtualize the garments. Further, a cross-section of the 3D virtual garment data was obtained, and the space length was measured in the designX program to prove the objectivity of the 3D virtual garment. The results indicated that three brands had a large spacelength at the front than the back because of the bent posture in cycling. Therefore, appropriate ease was required for thewaist and abdomen. Although there were various cutting lines of the bodice panel by brand, the design of the cutting linesshould consider the changes in the surface to reflect the bent posture in cycling. The results of this experiment confirmedthat the wrinkles present in the 3D virtual garment were reflected in the cross-section and that the space length wassmall in the high-stress area, as shown in red. Therefore, it was proven the stress of the 3D virtual garment could beused for 3D virtual garment evaluation.
Abstract
This study aims to analyze short sleeve cycling tops from three brands for a change in garment fit and pressuredepending on the static and cycling postures. To this end, it used a 3D virtual garment system to virtualize the garments. Further, a cross-section of the 3D virtual garment data was obtained, and the space length was measured in the designX program to prove the objectivity of the 3D virtual garment. The results indicated that three brands had a large spacelength at the front than the back because of the bent posture in cycling. Therefore, appropriate ease was required for thewaist and abdomen. Although there were various cutting lines of the bodice panel by brand, the design of the cutting linesshould consider the changes in the surface to reflect the bent posture in cycling. The results of this experiment confirmedthat the wrinkles present in the 3D virtual garment were reflected in the cross-section and that the space length wassmall in the high-stress area, as shown in red. Therefore, it was proven the stress of the 3D virtual garment could beused for 3D virtual garment evaluation.
참고문헌 (16)
- Ancutienė, K., "The influence of textile materials mechanical properties upon virtual garment fit", Materials Science, 17(2), pp.160~167 (2011)[DOI]
- Choi, H. S., "Active sportswear design" (2001), Suhaksa
- Hong, E. H., "Comparative analysis of the patterns for men's jean pants by 3D virtual garment simulation evaluation", Journal of the Korea Fashion and Costume Design Association, 17(2), pp.223~237 (2015)[DOI]
- Jariyapunya, N., "Construction simulation 3D of tight-fitting sportswear to evaluate tension distribution of elastic fabric", Journal of Engineering, RMUTT, 2, pp.69~76 (2017)
- 전성연, "가상착의 시스템을 이용한 여고생의 보디스 원형 개발", 한국의류산업학회지, 21(2), pp.825~838 (2019), 한국의류산업학회[DOI]
- Jeong, Y. H., "Pattern development of cycling pants from 3D human scan data considering the moving posture and the curvature plot for comfortable pressure sensation", doctoral, pp.2005
- 김경아, "남성 슬림 팬츠 패턴 비교 분석 - 3D CLO 가상착의 시스템을 활용하여 -", 복식문화연구, 22(4), pp.605~618 (2014), 복식문화학회[DOI]
- 김민경, "3차원 가상착의 시스템의 Mass Customization 적용가능성을 위한 맞음새 비교 연구", 기초조형학연구, 16(6), pp.77~87 (2015), 한국기초조형학회
- [URL]
- Liu, K., "Optimization design of cycling clothes’ patterns based on digital clothing pressures", Fibers and Polymers, 17(9), pp.1522~1529 (2016)[DOI]
- Liu, K., "Fit evaluation of virtual garment try-on by learning from digital pressure data", Knowledge-Based Systems, 133, pp.174~182 (2017)[DOI]
- Olaru, S., "3D fit garment simulation based on 3D body scanner anthropometric data", 8th International DAAAM Baltic Conference on Industrial Engineering, pp.146~ (2012)
- Park, H. J., "Development of tight-fit tights and sizing system of cycle wear for male highschool cyclist", doctoral, pp.2018
- 성옥진, "노년 비만남성의 셔츠원형 개발을 통한 실버 의류산업 활성화 기반 구축 - CLO 3D 가상착의 시스템 활용 -", 복식문화연구, 28(3), pp.299~312 (2020), 복식문화학회[DOI]
- Wong, A. S., "Influence of fabric mechanical property on clothing dynamic pressure distribution and pressure comfort on tight-fit sportswear", Sen'i Gakkaishi, 60(10), pp.293~299 (2004)[DOI]
- Zhang, X., "Numerical simulation of 3D dynamic garment pressure", Textile Research Journal, 72(3), pp.245~252 (2002)[DOI]