골프 스윙 자세의 체표면 변화 특성을 반영한 셔츠 패턴 설계 연구
A Study of Shirts’ Patternmaking Based on 3D Body Surface Changes in Golf Swing Postures
0
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
The purpose of this study was to develop a shirt pattern that enhances the functionality of golf swing motions. The pattern was made with 3D body surface shape data that changed according to dynamic golf postures. The data were collected from the golf swing motions. The 3D body surface data in golf swing postures piled up on the 3D surface data in a static posture. The results showed that the surface shape data changed more in the address, back swing, and finish postures than the other swing postures. The experimental pattern was developed with 3D surface scan data in those three golf swing motions. The pattern had raglan sleeves and the front-bodied piece was divided into two pieces with a princess line, which comes from armscye line of the address posture. The back bodice piece was divided into three pieces with a yoke line and a back princess line. The yoke line was made by back shoulder shape in the back swing posture. The level of comfort of the experimental garment and commercial golf shirts was evaluated by 38 women golfers. The experimental garment pattern was evaluated to be more comfortable in golf swing postures than commercial golf shirts.
Abstract
The purpose of this study was to develop a shirt pattern that enhances the functionality of golf swing motions. The pattern was made with 3D body surface shape data that changed according to dynamic golf postures. The data were collected from the golf swing motions. The 3D body surface data in golf swing postures piled up on the 3D surface data in a static posture. The results showed that the surface shape data changed more in the address, back swing, and finish postures than the other swing postures. The experimental pattern was developed with 3D surface scan data in those three golf swing motions. The pattern had raglan sleeves and the front-bodied piece was divided into two pieces with a princess line, which comes from armscye line of the address posture. The back bodice piece was divided into three pieces with a yoke line and a back princess line. The yoke line was made by back shoulder shape in the back swing posture. The level of comfort of the experimental garment and commercial golf shirts was evaluated by 38 women golfers. The experimental garment pattern was evaluated to be more comfortable in golf swing postures than commercial golf shirts.
참고문헌 (26)
- 강용모, "아디다스 골프, ‘포모션 에너지’ 런칭 기념 이벤트 실시", 스포츠월드, ~ (2011)
- 기술표준원, "한국인인체치수조사보급사업 : 3 차원 형상자료를 이용한 2차원 평면 패턴 제도 법 개발", 기술표준원, ~ (2005)
- 김영희, "여성복 상의 원형의 기능성 향상을 위한 소매산 및 소매통 변화에 관한 연구-동작 가동 범위(ROM) 측정을 중심으로-", 한국의류학회지, 33(8), pp.1181~1189 (2009), 한국의류학회
- "육상경기복"[URL]
- 류신아, "동작기능성 향상을 위한 스노우 보 드복의 여유량 및 패턴 설계", 박사, pp.2003
- 박길순, "소매산의 높이와 신축성 유무에 따른 동작기능성에 관한 연구 - 여고생 여름 교복 블라우스를 중심으로 -", 복식문화연구, 17(6), pp.992~1008 (2009), 복식문화학회
- "Technical Sports Wear 동향" (2004)[URL]
- 서동애, "삼차원 인체 레이져 스캔 데이터를 이용한 남성 자켓 원형 설계방법에 관한 연 구", 박사, pp.2001
- 석은영, "학령후기 여아의 하반신 체형분석에 의한 바지 원형설계 및 인대개발", 박사, pp.1998
- 박순자, "기능복" (1998), 수학사
- 오마호니, 마리, "스포츠 테 크:혁신적 직물,패션 그리고 디자인" (2002), 예경
- 오설영, "활동여유량을 적용한 커버롤 작업복 패턴 제작 방법 연구", 대한가정학회지, 49(3), pp.113~121 (2011), 대한가정학회
- 이명희, "팔 동작에 따른 소매유무별 블라우스의 착의 공극량 변화", 한국의류학회지, 34(11), pp.1779~1785 (2010), 한국의류학회
- 이영숙, "중년기 여성 재킷 패턴의 착의평가에 관한 연구", 박사, pp.1998
- 이주연, "골프복의 착용실태와 동작에 따른 신축성에 관한 연구", 석사, pp.1992
- 최혜선, "액 티브 스포츠웨어 설계" (2000), 수학사
- 토스키,보브, "본능적 감각으로 익히는 골프 스윙" (2000), (주)아침나라
- 허경, "하절기 골프복 디자인 개발에 관한 연 구", 석사, pp.1988
- Bretschneider, T, "Validation of the Body Scanner as a Measuring Tool for a Rapid Quantification of Body Shape", Skin Research and Technology, 15(3) (2009)
- Chi, L, "Body Scanning of Dynamic Posture", International Journal of Clothing Science and Technology, 18(3) (2006)
- Choi, S. Y, "3D Body Scan Analysis of Dimensional Change in Lower Body Measurements for Active Body Positions", Textile Research Journal, 81(1) (2011)
- Chun, J. S, "3D Body Scanning Posture to Collect Anthropometric Data for Garment Making", Journal of ARAHE, 11(4) (2004)
- "Garment Construction and Anthropometric Surveys: Body Dimensions (ISO 8559)" (1989), International Standardization Organization
- Istook, C. L, "3D Body Scanning Systems with Application to the Apparel Industry", Journal of Fashion Marketing and Management, 5(2) (2001)
- Oh, S. Y, "The Changes of Three Dimensional Body Measurements in Golf Swing Postures", Journal of ARAHE, 15(4) (2008)
- Suh, D, "Developing a Methodology to Flatten 3D Body Surface Scan Data Making Garment Pattern", Journal of ARAHE, 11(3) (2004)