논문KCI 등재
Influence of Deposition Conditions on the Adhesion of Sputter-deposited MoS2-Ti Films
1
조회
0
다운로드
0
인용
0
참고문헌
주제분류기계공학
초록
Abstract
MoS2-Ti films were deposited on SKD-11 tool steel substrate by a D.C. magnetron sputtering system. The influence of deposition parameters on the adhesion of the films was investigated by the scratch test. Cross-section morphology was evaluated using FE-SEM. The plasma etching played an important role on the adhesion of the films. The appropriate etching conditions roughened the surface, resulting in the improved adhesion of the film. The adhesion of the film increased with the interlayer thickness up to 110 nm and then decreased slightly with further increasing of interlayer thickness. The adhesion was highest at a bias voltage of -50V. Further increase of the bias voltage decreased the film adhesion.
관련 논문AI추천
Deposition of (Ti,Cr)N-MoS2 Thin Films by D.C Magnetron Sputtering김선규, J. H. Kim한국표면공학회 · 한국표면공학회지2006 · 제39권 제2호Deposition of (Ti, Cr, Zr)N-MoS2 Thin Films by D.C. Magnetron Sputtering김선규, Pham Van Vinh한국표면공학회 · 한국표면공학회지2006 · 제39권 제6호Deposition of ZrO2 and TiO2 Thin Films Using RF Magnetron Sputtering Method and Study on Their Structural Characteristics부진효, 이순보, C.H.Heo, H.T.Kwak, I.S.Bae, S.H.Jeong, Y.S.Shin한국표면공학회 · 한국표면공학회지2003 · 제36권 제1호Structure and Properties of Indium Tin Oxide Thin Films Sputtered from Different Target Densities김규호, 정영희, Badrul Munira, Rachmat Adhi Wibowo한국표면공학회 · 한국표면공학회지2005 · 제38권 제5호Pulsed Magnetron Sputtering Deposition of DLC Films Part I : Low-Voltage Bias-Assisted DepositionAlexenderN.Zakharov, Hui-GonChun, Jing_hyukLee, KonstantinV.Oskmov, Kwang-BokKim, NikolayS.Sochogov, Tong-YulCho, Yong-ZooYou한국표면공학회 · 한국표면공학회지2003 · 제36권 제1호Tribological Behavior of Multilayered WC-Ti1-xAlxN Coatings Deposited by Cathodic Arc Deposition Process on High Speed SteelC.W. Cho, H.G. Kim, J.G. Kim, S.H. Ahn, Y.Z. Lee한국재료부식학회 · CORROSION SCIENCE AND TECHNOLOGY2006 · 제5권 제2호