Deposition and Characterization of Electrophoretic Paint on AZ31 Magnesium Alloy
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
In this study, electrophoretic paint (E-paint) was deposited on the knife-abraded surface of AZ31 magnesium alloy (AZ31), and its adhesion and corrosion resistance were examined by tape peel-test and salt spray test, respectively. E-paint started to deposit on AZ31 Mg alloy after an inductance time and pores were found in the E-paint layer which is ascribed to hydrogen bubbles generated on the surface during the painting process. The pores disappeared after curing for 15 min at 160oC. The E-paint on AZ31 exhibited good adhesion after immersion in deionized water for 500 h at 40oC. The E-paint sample without scratch showed no corrosion after 1500 h of salt spray test. However, on the scratched sample, blisters were visible adjacent to the scratched sites after 500 h of salt spray test.
Abstract
In this study, electrophoretic paint (E-paint) was deposited on the knife-abraded surface of AZ31 magnesium alloy (AZ31), and its adhesion and corrosion resistance were examined by tape peel-test and salt spray test, respectively. E-paint started to deposit on AZ31 Mg alloy after an inductance time and pores were found in the E-paint layer which is ascribed to hydrogen bubbles generated on the surface during the painting process. The pores disappeared after curing for 15 min at 160oC. The E-paint on AZ31 exhibited good adhesion after immersion in deionized water for 500 h at 40oC. The E-paint sample without scratch showed no corrosion after 1500 h of salt spray test. However, on the scratched sample, blisters were visible adjacent to the scratched sites after 500 h of salt spray test.
참고문헌 (17)
- H.E. Friedrich, "Magnesium Technology: Metallurgy, Design Data, Applications" (2006), Springer
- Y. Kojima, "Platform Science and Technology for Advanced Magnesium Alloys", Mater. Sci. Forum, 350, pp.3~18 (2000)
- Kainer KU, "Magnesium Alloys and their Applications" (2006), Wiley-VCH Verlag GmbH
- "CRC handbook of Chemistry and Physics" (1980), CRC Press Inc
- J. E. Gray, "Protective coatings on magnesium and its alloys – a critical review", J. Alloy Compd, 336, pp.88~113 (2002)
- L. Besra, "A review on fundamentals and applications of electrophoretic deposition (EPD)", Prog. Mater. Sci, 52, pp.1~61 (2007)
- F. Beck, "Fundamental aspects of electrodeposition of paint", Prog. Org. Coat, 4, pp.1~60 (1976)
- Nguyen Van Phuong, "Zinc Phosphate Conversion Coatings on Magnesium Alloys: A Review", Metals and Materials International, 19(2), pp.273~281 (2013), 대한금속·재료학회[DOI]
- R. G. Hu, "Recent progress in corrosion protection of magnesium alloys by organic coatings", Prog. Org. Coat, 73, pp.129~141 (2012)
- J. Zhang, "Corrosion protection behavior of AZ31 magnesium alloy with cathodic electrophoretic coating pretreated by silane", Prog. Org. Coat, 66, pp.387~392 (2009)
- S. Moon, "A novel method to detect cathodic second-phase particles in Mg alloys", J. Solid State Electrochem, 19, pp.3491~3499 (2015)
- N. V. Phuong, "Deposition and characterization of E-paint on magnesium alloys", Prog. Org. Coat, 89, pp.91~99 (2015)
- 문성모, "A Blade-Abrading Method for Surface Pretreatment of Mg Alloys", 한국표면공학회지, 48(5), pp.194~198 (2015), 한국표면공학회[DOI]
- N. M. Aćamović, "Influence of substrate on the formation and growth kinetics of cathodic electrocoat paint", Prog. Org. Coat, 25, pp.293~307 (1995)
- C. M. Reddy, "Influence of surface pretreatment and electrocoating parameters on the adhesion of cathodic electrocoat to the Al alloy surfaces", Prog. Org. Coat, 33, pp.225~231 (1998)
- "ASTM standard D3359-02", ASTM International, 06.01, ~ (2004)
- "ASTM standard B117-03", ASTM International, 03.02, ~ (2004)