Fabrication of Plasma Electrolytic Oxidation Coatings on Magnesium AZ91D Casting Alloys
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
AZ91D casting alloy requires an advanced plasma anodizing processing because large amount of defects are liable to generate during anodization. In this study, plasma electrolytic oxidation (PEO) of AZ91D Mg alloy was conducted by the application of either constant voltage or current using a pulse mode and its effects on pore formation, surface roughness and corrosion resistance were investigated. The PEO films showed a three-layer structure. The PEO film thickness was found to increase linearly with voltage. The surface roughness, Ra, ranged between 0.2 μm and 0.3 μm. The corrosion resistance increased from RN 3.5 to 9.5 by the PEO treatment when evaluated according to the 72 hour salt spray test. The PEO-treated surface exhibited higher pitting potential than the raw material
Abstract
AZ91D casting alloy requires an advanced plasma anodizing processing because large amount of defects are liable to generate during anodization. In this study, plasma electrolytic oxidation (PEO) of AZ91D Mg alloy was conducted by the application of either constant voltage or current using a pulse mode and its effects on pore formation, surface roughness and corrosion resistance were investigated. The PEO films showed a three-layer structure. The PEO film thickness was found to increase linearly with voltage. The surface roughness, Ra, ranged between 0.2 μm and 0.3 μm. The corrosion resistance increased from RN 3.5 to 9.5 by the PEO treatment when evaluated according to the 72 hour salt spray test. The PEO-treated surface exhibited higher pitting potential than the raw material
참고문헌 (14)
- Mordike, B. L., "Magnesium properties-applications-potential", Materials Science and Engineering A, 302(1), pp.37~45 (2001)
- Song, Guangling, "The electrochemical corrosion of pure magnesium in 1 N NaCl", Corrosion Science, 39(5), pp.855~875 (1997)
- Ma, Y., "Systematic study of the electrolytic plasma oxidation process on a Mg alloy for corrosion protection", Thin Solid Films, 494(1), pp.296~301 (2006)
- Gray, JEl, "Protective coatings on magnesium and its alloys—a critical review", Journal of alloys and compounds, 336(1-2), pp.88~113 (2002)
- Srinivasan, P. Bala, "Effect of plasma electrolytic oxidation treatment on the corrosion and stress corrosion cracking behaviour of AM50 magnesium alloy", Materials Science and Engineering A, 494(1), pp.401~406 (2008)
- Zhang, Yongjun, "Study on the environmentally friendly anodizing of AZ91D magnesium alloy", Surface and Coatings Technology, 161(1), pp.36~43 (2002)
- Duan, Hongping, "Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D", Electrochimica Acta, 51(14), pp.2898~2908 (2006)
- Yerokhin, A. L., "Plasma electrolysis for surface engineering", Surface and coatings technology, 122(2), pp.73~93 (1999)
- Wei, C. B., "Anode current effects in plasma electrolytic oxidation", Surface and Coatings Technology, 201(9), pp.5021~5024 (2007)
- Curran, J. A., "Thermo-physical properties of plasma electrolytic oxide coatings on aluminium", Surface and Coatings Technology, 199(2), pp.168~176 (2005)
- Narayanan, TSN Sankara, "Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants Prospects and challenges", Progress in Materials Science, 60, pp.1~71 (2014)
- Moon, Sungmo, "Anodic oxidation of Mg–Sn alloys in alkaline solutions", Corrosion Science, 65, pp.494~501 (2012)
- Hussein, R. O., "The effect of processing parameters and substrate composition on the corrosion resistance of plasma electrolytic oxidation (PEO) coated magnesium alloys", Surface and Coatings Technology, 237, pp.357~368 (2013)
- Wang, "Microstructure and corrosion behavior of plasma electrolytic oxidation coated magnesium alloy pre-treated by laser surface melting", Surface and Coatings Technology, 206(13), pp.3109~3115 (2012)