Formation of Cerium Conversion Coatings on AZ31 Magnesium Alloy
1
조회
0
다운로드
8
인용
0
참고문헌
키워드
초록
This review deals with one of the surface modification techniques, chemical conversion coating and particularly cerium-based conversion coatings (CeCC) as a promising substitute for chromium and phosphate conversion coating on magnesium and its alloys. The CeCCs are commonly considered environmentally friendly. The effects of surface preparation, coating thickness, bath composition, and e-paint on the corrosion behavior of CeCCs have been studied on the AZ31 magnesium alloy. This review also correlates the coating microstructural, morphological, and chemical characteristics with the processing parameters and corrosion protection. Results showed that the as-deposited coating system consists of a three layer structure (1) a nanocrystalline MgO transition layer in contact with the Mg substrate, (2) a nanocrystalline CeCC layer, and (3) an outer amorphous CeCC layer. The nanocrystalline CeCC layer thickness is a function of immersion time and cerium salt used. The overall corrosion protection was crucially dependent on the presence of coating defects. The corrosion resistance of AZ31 magnesium alloy was better for thinner CeCCs, which can be explained by the presence of fewer and smaller cracks. On the other hand, maximum corrosion protection was achieved when AZ31 magnesium samples with thin CeCCs are e-painted. The e-paint layer further restricts and hinders the movement of chloride and other aggressive ions present in the environment from reaching the magnesium surface.
Abstract
This review deals with one of the surface modification techniques, chemical conversion coating and particularly cerium-based conversion coatings (CeCC) as a promising substitute for chromium and phosphate conversion coating on magnesium and its alloys. The CeCCs are commonly considered environmentally friendly. The effects of surface preparation, coating thickness, bath composition, and e-paint on the corrosion behavior of CeCCs have been studied on the AZ31 magnesium alloy. This review also correlates the coating microstructural, morphological, and chemical characteristics with the processing parameters and corrosion protection. Results showed that the as-deposited coating system consists of a three layer structure (1) a nanocrystalline MgO transition layer in contact with the Mg substrate, (2) a nanocrystalline CeCC layer, and (3) an outer amorphous CeCC layer. The nanocrystalline CeCC layer thickness is a function of immersion time and cerium salt used. The overall corrosion protection was crucially dependent on the presence of coating defects. The corrosion resistance of AZ31 magnesium alloy was better for thinner CeCCs, which can be explained by the presence of fewer and smaller cracks. On the other hand, maximum corrosion protection was achieved when AZ31 magnesium samples with thin CeCCs are e-painted. The e-paint layer further restricts and hinders the movement of chloride and other aggressive ions present in the environment from reaching the magnesium surface.
참고문헌 (64)
- Y. Kojima, "Project of platform of science and technology for advanced magnesium alloys", Mater. Trans, 42, pp.1154~1159 (2001)
- G. L. Makar, "Corrosion studies of rapidly solidified magnesium alloys", J Electrochem Soc, 137, pp.414~421 (1990)
- G. Song, "Recent Progress in Corrosion and Protection of Magnesium Alloys", Adv Eng Mater, 7, pp.563~586 (2005)
- J. E. Gray, "Protective coatings on magnesium and its alloys—a critical review", J Alloys Compd, 336, pp.88~113 (2002)
- B. Valdez, "Cerium-based conversion coatings to improve the corrosion resistance of aluminium alloy 6061-T6", Corros. Sci, 87, pp.141~149 (2014)
- N. A. El Mahallawy, "AZ91 Magnesium Alloys: Anodizing of Using Environmental Friendly Electrolytes", J Surf Eng Mater Adv Technol, 01, pp.62~72 (2011)
- B. J. Weber, "Electrolytic and Chemical Conversion Coatings" (1976), Poland Portcullis Press Ltd
- H. Vakili, "The corrosion performance and adhesion properties of the epoxy coating applied on the steel substrates treated by cerium-based conversion coatings", Corros. Sci, 94, pp.466~475 (2015)
- M. Dabalà, "Cerium-based chemical conversion coating on AZ63 magnesium alloy", Surf. Coat. Technol, 172, pp.227~232 (2003)
- F. A. Lowenheim, "Modern Electroplating" (1974), New York Wiley
- J. B. Mohler, "Metal Finishing 73", 30~ (1974)
- N. Van Phuong, "Effect of microstructure on the zinc phosphate conversion coatings on magnesium alloy AZ91", Appl. Surf. Sci, 264, pp.70~78 (2013)
- T. Schmidt-Hansberg, "ATB Metallurgie, Brussels: Bonn", pp.9~14 (2003), ATB Metallurgie
- D. Hawke, "A phosphate-permanganate conversion coating for magnesium", Met Finish, 93, pp.34~38 (1995)
- H. Umehara, "An investigation of the structure and corrosion resistance of permanganate coversion coatings on AZ91D magnesium alloy", Mater. Trans, 42, pp.1691~1699 (2001)
- K. Z. Chong, "Conversion-coating treatment for magnesium alloys by a permanganate–phosphate solution", Mater. Chem. Phys, 80, pp.191~200 (2003)
- M. A. Gonzalez-Nunez, "Kinetics of the development of a nonchromate conversion coating for magnesium alloys and magnesium-Based metal matrix composites", Corrosion, 55, pp.1136~1143 (1999)
- M. A. Gonzalez-Nunez, "A non-chromate conversion coating for magnesium alloys and magnesium-based metal matrix composites", Corros. Sci, 37(11), pp.1763~1772 (1995)
- C. S. Lin, "Formation and properties of stannate conversion coatings on AZ61 magnesium alloys", Corros. Sci, 48, pp.93~109 (2006)
- A. L. Rudd, "The corrosion protection afforded by rare earth conversion coatings applied to magnesium", Corros. Sci, 42, pp.275~288 (2000)
- K. Brunelli, "Effect of HCl pre-treatment on corrosion resistance of cerium-based conversion coatings on magnesium and magnesium alloys", Corros. Sci, 47, pp.989~1000 (2005)
- C. S. Lin, "Formation of Cerium Conversion Coatings on AZ31 Magnesium Alloys", J. Electrochem. Soc, 152, pp.B54~B59 (2005)
- M. P. Schriever, "Canadian Pat. 2,056,159", ~ (1990)
- G. Goeminne, "Characterisation of conversion layers on aluminium by means of electrochemical impedance spectroscopy", Electrochim. Acta, 40, pp.479~486 (1995)
- M. Bethencourt, "High protective, environmental friendly and short-time developed conversion coatings for aluminium alloys", Appl. Surf. Sci, 189, pp.162~173 (2002)
- M. Dabalà, "Cerium-based conversion layers on aluminum alloys", Appl. Surf. Sci, 172, pp.312~322 (2001)
- P. Campestrini, "Formation of a cerium-based conversion coating on AA2024: relationship with the microstructure", Surf. Coat. Technol, 176, pp.365~381 (2004)
- H. Ardelean, "Corrosion protection of magnesium alloys by cerium, zirconium and niobium-based conversion coatings", Corros. Sci, 50, pp.1907~1918 (2008)
- M. F. Montemor, "Characterization of rare-earth conversion films formed on the AZ31 magnesium alloy and its relation with corrosion protection", Appl. Surf. Sci, 253, pp.6922~6931 (2007)
- L. Yang, "Novel copper immersion coating on magnesium alloy AZ91D in an alkaline bath", J Coat Technol Res, 3, pp.241~246 (2006)
- C. Wang, "The characterization and corrosion resistance of cerium chemical conversion coatings for 304 stainless steel", Corros. Sci, 46, pp.75~89 (2004)
- M. F. Montemor, "Composition and corrosion behaviour of galvanised steel treated with rare-earth salts: the effect of the cation", Prog. Org. Coat, 44, pp.111~ (2002)
- M. F. Montemor, "Composition and behaviour of cerium films on galvanised steel", Prog. Org. Coat, 43, pp.274~281 (2001)
- A. J. Aldykewicz, "The Investigation of Cerium as a Cathodic Inhibitor for Aluminum-Copper Alloys", J. Electrochem. Soc, 142, pp.3342~3350 (1995)
- A. Aballe, "CeCl 3 and LaCl 3 binary solutions as environment-friendly corrosion inhibitors of AA5083 Al–Mg alloy in NaCl solutions", J Alloys Compd, 323, pp.855~858 (2001)
- D. R. Arnott, "Cationic-film-forming inhibitors for the protection of the AA 7075 aluminum alloy against corrosion in aqueous chloride solution", Corros, 45, pp.12~18 (1989)
- Y. Zhang, "Electrochemical behavior of anodized Mg alloy AZ91D in chloride containing aqueous solution", Corros. Sci, 47, pp.2816~2831 (2005)
- H. Ardelean, "Enhanced corrosion resistance of magnesium and its alloys through the formation of cerium (and aluminium)oxide surface films", Mater. and Corros, 52, pp.889~895 (2001)
- X. Yue, "Preparation and corrosion resistance of rare eath conversion coatings on AZ91 magnesium alloy", J. of Rare Earth, 23, pp.555~558 (2005)
- L. Ling-jie, "Progress in research of rare earth conversion coatings on magnesium alloys", J. of Mat. Eng, 10, pp.60~64 (2006)
- H. Wang, "Influence of cerium on passivity behavior of wrought AZ91 alloy", Electrochimica Acta, 54, pp.706~713 (2008)
- J. Trolho, "Aluminium Extrusion 8", 46~53 (2003)
- W. A. Roland, "New chromium–free processes for the chemical pretreatment of aluminium surfaces", J. ATB Benelux Metallurgie, 37, pp.89~98 (1997)
- A. E. Hughes, "Surface conversions of aluminum and ferrous alloys for corrosion resistance", Proc. Corros. 2000 Res. Top. Symp. on, pp.47~66 (2000), NACE International
- F. Mansfeld, "Chemical passivation of Al alloys and Al-based metal matrix composites in rare earth metal chlorides", Proc. 11th Int. Corrosion Cong. on ‘Innovation and technology transfer for corrosion control (ICC)’ (1990), World Corrosion Organization
- J. O. Stoffer, "Environmentally compliant aircraft coatings", Polym. Mater. Sci. Eng, 83, pp.311~312 (2000)
- J. O. Stoffer, , Proceedings of the 32nd International SAMPETechnical Conference, pp.879~888 (2000), SAMPE International
- M. Bethencourt, "Lanthanide compounds as environmentally-friendly corrosion inhibitors of aluminium alloys: a review", Corros. Sci, 40, pp.1803~1819 (1998)
- A. Pardo, "Influence of Ce surface treatments on corrosion behaviour of A3xx.x", SiCp composites in 3.5wt.% NaCl, 2006, pp.48, 3035~
- A. Pardo, "Effect of Ce surface treatments on corrosion resistance of A3xx.x", SiCp composites in salt fog, 2006, pp.200, 2938~2947
- B. R. W. Hinton, "The inhibition of aluminium alloy corrosion by rare earth metal cations", Corros. Australasia, 10, pp.12~17 (1985)
- M. Kendig, "Cr(VI) and Ce(III)Inhibition of Oxygen Reduction on Copper", J. Electrochem. Soc, 149, pp.B47~B51 (2002)
- 문성모, "A Blade-Abrading Method for Surface Pretreatment of Mg Alloys", 한국표면공학회지, 48(5), pp.194~198 (2015), 한국표면공학회[DOI]
- M. F. Montemor, "Composition and corrosion resistance of cerium conversion films on the AZ31magnesium alloy and its relation to the salt anion", Appl. Surf. Sci, 254, pp.1806~1814 (2008)
- L. Ling-jie, "Formation and characterization of cerium conversion coatings on magnesiumalloy", J. of Rare Earth, 26, pp.383~387 (2008)
- C. S. Lin, "Corrosion resistance of ceriumconversion coated AZ31 magnesium alloys in cerium nitrate solutions", Mater. Trans, 47, pp.1020~1025 (2006)
- "Cerium-based conversion coatings on magnesium alloys" (2014)[URL]
- N. Van Phuong, "Deposition and characterization of E-paint on magnesium alloys", Prog. Org. Coat, 89, pp.91~99 (2015)
- N. Van Phuong, "Effects of phosphating bath compositions on the formation and structure of zinc phosphate conversion coatings on magnesium alloy AZ31", Conf. Proc. Korean Inst Surf Eng, pp.322~323 (2012)
- D. Dahuang, "Surface Technology Science for Modern Materials", pp.584~ (2004), Metallurgy Industry Press
- N. Van Phuong, "Adhesion and corrosion studies of electrophoretic paint on AZ31 Mg alloy pretreated in cerium solution with or without addition of ethanol", Prog. Org. Coat
- S. Böhm, "Kinetic and Mechanistic Studies of Rare Earth-Rich Protective Film Formation Using In Situ Ellipsometry", J. Electrochem. Soc, 147, pp.3286~3293 (2000)
- M. Pourbaix, "Atlas of Electrochemical Equilibria in Aqueous Solutions" (1974), NACE
- A. J. Aldykiewicz, "Studies of the Formation of Cerium-Rich Protective Films Using X-Ray Absorption Near-Edge Spectroscopy and Rotating Disk Electrode Methods", J. Electrochem. Soc, 143, pp.147~154 (1996)