증착 기판 온도 제어에 따른 Zn-Mg 박막의 치밀도 및 내식성 향상에 관한 연구
Density and Corrosion Property Improvement of Zn-Mg Coatings by Controlling the Substrate Temperature during the Deposition
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the corrosion resistance of Zn-3wt.%Mg coating was enhanced by controlling the density of coating. During the deposition the substrate temperature was controlled via an intermittent deposition process, resulting in the improvement of coating density. The maximum substrate temperature during this intermittent deposition process could be controlled from 200 oC to 80 oC, depending upon the number of coating layer. The density of Zn-3 wt.%Mg coating increased from 76.1 % to 95.8 % as the substrate temperature was controlled. The salt spray test results revealed that the corrosion resistance of Zn-Mg coated steel could increase 3 times by increasing the density in coatings, while adhesion strength of coating was not changed significantly during 0-T bending test.
Abstract
In this study, the corrosion resistance of Zn-3wt.%Mg coating was enhanced by controlling the density of coating. During the deposition the substrate temperature was controlled via an intermittent deposition process, resulting in the improvement of coating density. The maximum substrate temperature during this intermittent deposition process could be controlled from 200 oC to 80 oC, depending upon the number of coating layer. The density of Zn-3 wt.%Mg coating increased from 76.1 % to 95.8 % as the substrate temperature was controlled. The salt spray test results revealed that the corrosion resistance of Zn-Mg coated steel could increase 3 times by increasing the density in coatings, while adhesion strength of coating was not changed significantly during 0-T bending test.
참고문헌 (19)
- Jong Min Byun, "Overview and Prospects for Zn-Mg Coated Steel Sheet", Trends in Metals & Materials Engineering, 24, pp.14~21 (2011)
- Y.F.Jiang, "Corrosion behavior of pulse-plated Zn–Ni alloy coatings on AZ91 magnesium alloy in alkaline solutions", Thin Soild Films, 484, pp.232~237 (2005)
- Yang Bai, "Corrosion behavior of low pressure cold sprayed Zn-Ni composite Coatings", J. Alloys Compd, 719, pp.194~202 (2017)
- L.Guzman, "Vapour deposited Zn–Cr Alloy coatings for enhanced manufacturing and corrosion resistance of steel sheets", Surf. Coat. Technol, 125, pp.218~222 (2000)
- Tz.Boiadjieva-Scherzer, "Hydrogen evolution reaction on electrodeposited Zn-Cr alloy coatings", J. Electroanal, 783, pp.68~75 (2016)
- Qi Xue, "Microstructure evolution of a Zn-Al coating co-deposited on lowcarbon steel by pack cementation", J. Alloys Compd, 699, pp.1012~1021 (2017)
- I.A.Gorlach, "A new method for thermal spraying of Zn–Al coatings", Thin Solid Films, 517, pp.5270~5273 (2009)
- Caizhen Yao, "Codeposited Zn–Mg coating with improved mechanical and anticorrosion properties", Surf. Coat. Technol, 219, pp.126~130 (2013)
- N.C.Hosking, "Corrosion resistance of zinc–magnesium coated steel", Corros. Sci, 49, pp.3669~3695 (2007)
- P.Volovitch, "Understanding corrosion via corrosion product characterization: I. Case study of the role of Mg alloying in Zn–Mg coating on steel", Corros. Sci, 51, pp.1251~1262 (2009)
- E. Diler, "Chemistry of corrosion products of Zn and MgZn pure phases under atmospheric conditions", Corros. Sci, 65, pp.178~186 (2012)
- JoungHyun La, "Synthesis of Zn–Mg coatings using unbalanced magnetron sputtering and theirs corrosion resistance", Surf. Coat. Technol, 259, pp.56~61 (2014)
- JoungHyun La, "A hybrid test method to evaluate the adhesion characteristics of soft coatings on steel substrates – Application to Zn-Mg coated steel", Surf. Coat. Technol, 307, pp.1100~1106 (2016)
- Zhong-Ge Xi, "Effect of the process parameters on the microstructure and corrosion resistance of Zn-Mg alloy coatings prepared via a combined PVD and reaction-diffusion process", Surf. Coat. Technol, 306, pp.418~427 (2016)
- Lan-Yue Cui, "Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys: The influence of porosity", J. Alloys Compd, 695, pp.2464~2476 (2017)
- P. B. Barna, "Fundamental structure forming phenomena of polycrystalline films and the structure zone models", Thin Solid Films, 317, pp.27~33 (1998)
- M. V. Akdeniz, "Microstructures and phase selection in rapidly solidified Zn-Mg alloys", J. Mater. Sci, 31, pp.545~550 (1996)
- R.Münz, "Zinc", manganese multilayer coatings for corrosion protection, 2004, pp.459, 297~302
- Jong Min Byun, "Effect of heat treatment on corrosion resistance and adhesion property in Zn-Mg-Zn multi-layer coated steel prepared by PVD process", Surf. Coat. Technol, 309, pp.1010~1014 (2017)