EIS 분석을 통한 Mg 함량에 따른 Zn-Mg 박막의 부식 특성에 관한 연구
The Study on the Corrosion Property of the Zn-Mg Alloy Coatings with Various Mg Contents using EIS Measurement
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, the Zn-Mg alloy coatings with various Mg contents were deposited using an unbalanced magnetron sputtering process. Their surface microstructure, chemical composition, phase, and corrosion property were investigated. The microstructure of the Zn-Mg coatings changed from porous microstructure to dense one with increasing Mg contents in the coatings. As Mg contents in coatings increased, intermetallicphases such as Mg2Zn11 and MgZn2 were detected from X-ray diffraction (XRD) results. The corrosion resistance of the Zn-Mg alloy coatings was investigated quantitatively using electrochemical impedance spectroscopy (EIS) measurement with 3.5% NaCl solution. The results of EIS measurement showed that the charge transfer resistance and the phase angle of the Zn-Mg alloy coatings were increased from 162.1 Ω·cm2 to 558.8 Ω·cm2 and from about 40o to 60o with increasing Mg contents from 5.1 wt.% to 15.5 wt.% in the coatings. These results demonstrate that the Zn-Mg coatings with increasing Mg contents showed an enhanced corrosion resistance.
Abstract
In this study, the Zn-Mg alloy coatings with various Mg contents were deposited using an unbalanced magnetron sputtering process. Their surface microstructure, chemical composition, phase, and corrosion property were investigated. The microstructure of the Zn-Mg coatings changed from porous microstructure to dense one with increasing Mg contents in the coatings. As Mg contents in coatings increased, intermetallicphases such as Mg2Zn11 and MgZn2 were detected from X-ray diffraction (XRD) results. The corrosion resistance of the Zn-Mg alloy coatings was investigated quantitatively using electrochemical impedance spectroscopy (EIS) measurement with 3.5% NaCl solution. The results of EIS measurement showed that the charge transfer resistance and the phase angle of the Zn-Mg alloy coatings were increased from 162.1 Ω·cm2 to 558.8 Ω·cm2 and from about 40o to 60o with increasing Mg contents from 5.1 wt.% to 15.5 wt.% in the coatings. These results demonstrate that the Zn-Mg coatings with increasing Mg contents showed an enhanced corrosion resistance.
참고문헌 (16)
- N. C. Hosking, , Corrosion Science, 49, pp.3669~ (2007)
- T. Prosek, , Corrosion Science, 86, pp.231~ (2014)
- P. Volovitch, , Corrosion Science, 51, pp.1251~ (2009)
- M. Mahdavian, , Corrosion Science, 48, pp.4152~ (2006)
- G. W. Walter, , Corrosion Science, 32, pp.1041~ (1991)
- H. Euchner, , 박사, pp.2011
- M. H. Lee, , Current Applied Physics, 12, pp.S2~ (2012)
- K. Schluter, , Corrosion science, 63, pp.234~ (2012)
- K. R. Sriraman, , Electrochimica Acta, 105, pp.314~ (2013)
- V. K. W. Grips, , Electrochimica Acta, 51, pp.3461~ (2006)
- E. Diler, , Corrosion Science, 65, pp.178~ (2012)
- C. Yao, , Journal of Alloys and Compounds, 602, pp.101~ (2014)
- M. A. Raj, , Colloids and Surfaces B : Biointerfaces, 87, pp.353~ (2011)
- J. Zhang, , Electrochimica Acta, 55, pp.560~ (2009)
- M. G. Olivier, , Progress in Organic Coatings, 52, pp.263~ (2005)
- M. Yano, , Nanomaterials, 3, pp.204~ (2012)