H13 공구강의 전처리에 따른 Mo-Cu-N 코팅의 기계적 특성
Mechanical Properties of MoN-Cu Coatings according to Pre-treatment of AISI H13 Tool Steel
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The degradation of mechanical properties of nitride coatings to steel substrates is one of the main challenges for industrial applications. In this study, plasma nitriding treatment was used in order to increase the mechanical properties of Mo-Cu-N coating to the H13 tool steel. The nanostructured Mo-Cu-N coating was deposited using pulsed DC magnetron sputtering method with a single alloy Mo-Cu target. Mechanical properties of MoN-Cu coated samples after nitriding were found to be relatively better than non-nitrided MoN-Cu coating.
Abstract
The degradation of mechanical properties of nitride coatings to steel substrates is one of the main challenges for industrial applications. In this study, plasma nitriding treatment was used in order to increase the mechanical properties of Mo-Cu-N coating to the H13 tool steel. The nanostructured Mo-Cu-N coating was deposited using pulsed DC magnetron sputtering method with a single alloy Mo-Cu target. Mechanical properties of MoN-Cu coated samples after nitriding were found to be relatively better than non-nitrided MoN-Cu coating.
참고문헌 (17)
- 박현준, "STD61 공구강의 내충격 및 내열피로 특성에 미치는 가스 퀜칭 압력의 영향", 열처리공학회지, 29(6), pp.277~283 (2016), 한국열처리공학회
- T. Cselle, "Today's applications and future developments of coatings for drills and rotating cutting tools", Surf. Coat. Technol., 76-77, pp.712~ (1995)
- M. Urgen, "Characterization of molybdenum nitride coatings produced by arc-PVD technique", Surf. Coat. Technol., 20194-95, pp.501~506 (1997)
- A. Aubert, "Hard chrome and molybdenum coatings produced by physical vapor deposition", Thin Solid Films, 126, pp.61~67 (1985)
- 이한찬, "단일 합금타겟을 이용한 마크네트론 스퍼터링 공정으로 증착된 MoN-Cu 박막", 한국표면공학회지, 49(4), pp.368~375 (2016), 한국표면공학회[DOI]
- M. K. Kazmanli, "Effect of nitrogen pressure, bias, voltage and substrate temperature on the phase structure of Mo-N coatings produced by cathodic arc PVD", Surf. Coat. Technol., 167, pp.77~82 (2003)
- A. Leyland, "Design criteria for wear-resistant nanostructured and glassy-metal coatings", Surf. Coat. Technol., 177-178, pp.317~324 (2004)
- S. Ma, "Plasma nitride and TiCN coated AISI H13 steel by pulsed dc PECVD and its application for hot-working dies", Surf. Coatings Technol, 191, pp.201~205 (2005)
- S. M. M. Shafiei, "Characterization of TiCN thin films deposited by Dc-Pulsed PACVD using methane precursor", Mater. Res, 17, pp.1651~1657 (2014)
- S. Guruvenket, "Mechanical and tribological properties of duplex treated TiN, nc-TiN, nc-TiN", a-SiN x and nc-TiCN, Surf. Coatings Technol., pp.2009, 203[DOI]
- 이한찬, "단일 합금 타겟을 이용한 마그네트론 스퍼터링법으로 제작된 Mo-Cu 나노박막의 특성에 관한 연구", 석사, 전기공학, pp.2012
- "Verein Deutscher Ingenieure Normen, VDI 3198" (1991), VDI-Verlag
- Kyun Taek Cho, "Surface hardening of shot peened H13 steel by enhanced nitrogen diffusion", Surf. Coatings Technol, 232, pp.912~919 (2013)
- 김수빈, "Cu 첨가가 Mo-Cu-N 코팅의 미세구조와 기계적 특성에 미치는 영향", 한국표면공학회지, 52(4), pp.227~232 (2019), 한국표면공학회[DOI]
- A.daS. Rocha, "Effect of different surface states before plasma nitriding on properties and machining behavior of M2 high-speed steel", Surf. Coatings Technol., 165, pp.176~185 (2003)
- Xing Xu, "Microstructure and tribological behaviors of MoN-Cu nanocomposite coatings sliding against Si3H4ball under dry and oil-lubricated conditions", Wear, 434-435, pp.202994~ (2019)
- N. Vidakis, "The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds", J. Mater. Pro. Technol., 143-144, pp.481~485 (2003)