Cu 첨가가 Mo-Cu-N 코팅의 미세구조와 기계적 특성에 미치는 영향
Effects of Cu Addition on Microstructural and Mechanical Properties of Mo-Cu-N Coatings
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Mo-N based coatings have been studied for enhancing mechanical characteristics of thin films. In the case of Mo-X-N coatings, the microstructure and mechanical properties can be affected by the addition of the third element. In this work, Mo-Cu-N coatings were successfully fabricated with varying the Cu content from 4.5 at% to 31 at% by the co-sputtering method. Thus, properties of the coatings were analyzed by EDS, SEM, XRD, AFM, nano indentation and scratch test techniques. From observed results, MoxN bonds were made in a nitrogen atmosphere and Cu elements were present at grain boundaries. In addition, coatings with the Cu content above 14 at% had a Cu3N peak in the XRD results. Thus, it is suggested that the formation of Cu3N phase affected the microstructure and mechanical properties of Mo-Cu-N coatings. Mechanical properties of Mo-Cu-N coatings were found to be relatively better at Cu content of about 12 at%.
Abstract
Mo-N based coatings have been studied for enhancing mechanical characteristics of thin films. In the case of Mo-X-N coatings, the microstructure and mechanical properties can be affected by the addition of the third element. In this work, Mo-Cu-N coatings were successfully fabricated with varying the Cu content from 4.5 at% to 31 at% by the co-sputtering method. Thus, properties of the coatings were analyzed by EDS, SEM, XRD, AFM, nano indentation and scratch test techniques. From observed results, MoxN bonds were made in a nitrogen atmosphere and Cu elements were present at grain boundaries. In addition, coatings with the Cu content above 14 at% had a Cu3N peak in the XRD results. Thus, it is suggested that the formation of Cu3N phase affected the microstructure and mechanical properties of Mo-Cu-N coatings. Mechanical properties of Mo-Cu-N coatings were found to be relatively better at Cu content of about 12 at%.
참고문헌 (18)
- T. Cselle, "Today's applications and future developments of coatings for drills and rotating cutting tools", Surf. Coat. Technol, 76-77, pp.712~ (1995)
- M. urgen, "Characterization of molybdenum nitride coatings produced by arc-PVD technique", Surf. Coat. Technol, 201(94-95), pp.501~506 (1997)
- J. Valli, "Tribological properties of MoXN coatings in contact with copper", J Vac Sci Tech, pp.2850~ (1986)
- A. AUBERT, "Hard chrome and molybdenum coatings produced by physical vapor deposition", Thin Solid Films, 126, pp.61~67 (1985)
- Kwang Lung Lin, "Deposition and properties of Mo-N films", J Vac Sci Tech, 13, pp.2872~ (1995)
- M. K. Kazmanli, "Effect of nitrogen pressure, bias, voltage and substrate temperature on the phase structure of Mo-N coatings produced by cathodic arc PVD", Surf. Coat. Technol, 167, pp.77~82 (2003)
- A. OZturk, "Nanocomposite Mo-Cu-N coatings deposited by Reactive magnetron sputtering process with a single alloying target", Tribol Int, 41, pp.49~59 (2008)
- J. Š na, "Physical properties and high-temperature oxidation resistance of sputtered Si3N4", MoNx nanocomposite coatings, 2006, pp.80, 588~592
- Q. Liu, "Preparation and characterization of nanocrystalline composites Mo-C-N hard films", Thin Solid Films, 503, pp.79~84 (2006)
- Q. Liu, "Synthesis and properties of nanocomposite MoSiN hard films", Surf. Coat. Technol, 201, pp.1864~1898 (2006)
- A. Leyland, "Design criteria for wearresistant nanostructured and glassy-metal coatings", Surf. Coat. Technol, 177-178, pp.317~324 (2004)
- Ali Erdemir, "Carbon-based tribofilms from lubricating oils", nature, 536 (2016)
- J. C. Ding, "Influence of Cu content on the microstructure and mechanical properties of Cr-Cu-N coatings", Hindawi, pp.11~ (2018)
- J. H. Shin, "Microstructural evolution and tribological behavior of Mo-Cu-N coatings as a function of Cu content", Surf. Coat. Technol, 130, pp.870~879 (2011)
- Abhijit Majumdar, "Strain Effects by Surface Oxidation of Cu3N Thin Films Deposited by DC Magnetron Sputtering", coatings, pp.764~ (2017)
- A. Khorsand Zak, "X-ray analysis of ZnO nanoparticles by Williamson-Hall and size-strain plot methods", Solid State Sci, 13, pp.251~256 (2011)
- Y.- C. Kuo, "The effect of Cu content on the microstructure, mechanical and antibacterial properties of Cr-Cu-N nanocomposite coatings deposited by pulsed DC", Surf. Coat. Technol, 202, pp.854~860 (2007)
- J.F. Pierson, "Structure and properties of copper nitride films formed by reactive magnetron sputtering", Vacuum, 66, pp.59~64 (2002)