A Blade-Abrading Method for Surface Pretreatment of Mg Alloys
0
조회
0
다운로드
11
인용
0
참고문헌
키워드
초록
A blade-abrading method was newly developed for the preparation of clean Mg alloy surface and reported for the first time in detail in this paper. The blade-abrading method includes abrading of the Mg alloy surface with a sharp blade or knife to remove the surface oxide and contaminants on the skin of Mg alloys mechanically, thereby providing very clean surface of Mg alloys. The clean surface prepared by the blade-abrading method in the air was found to be covered with thin and dense air-formed oxide films. Based on the experimental results obtained in this work, it is concluded that the newly developed blade-abrading technique is a very simple and useful pretreatment method which can provide clean and well-defined surface for the following surface treatments.
Abstract
A blade-abrading method was newly developed for the preparation of clean Mg alloy surface and reported for the first time in detail in this paper. The blade-abrading method includes abrading of the Mg alloy surface with a sharp blade or knife to remove the surface oxide and contaminants on the skin of Mg alloys mechanically, thereby providing very clean surface of Mg alloys. The clean surface prepared by the blade-abrading method in the air was found to be covered with thin and dense air-formed oxide films. Based on the experimental results obtained in this work, it is concluded that the newly developed blade-abrading technique is a very simple and useful pretreatment method which can provide clean and well-defined surface for the following surface treatments.
참고문헌 (17)
- F. Zucchi, "Stannate and permanganate conversion coatings on AZ31 magnesium alloy", Corrosion Science, 49, pp.4542~ (2007)
- 이동길, "전해액 중 Sodium silicate의 농도에 따라 양극 산화된 AZ31B 마그네슘 합금 양극 피막의 특성 평가", 한국표면공학회지, 42(3), pp.109~115 (2009), 한국표면공학회
- U. C. Nwaogu, "Effects of organic acid pickling on the corrosion resistance of magnesium alloy AZ31sheet", Corrosion Science, 52, pp.2143~ (2010)
- 김명환, "비크롬계 인산-과망간산 용액을 이용한 AZ31 마그네슘 합금의 산처리에 따른 화성 피막의 특성 평가", 한국표면공학회지, 43(2), pp.73~79 (2010), 한국표면공학회
- 최경수, "경량 마그네슘 합금(AZ31B)의 도금층 형성 연구", 한국표면공학회지, 44(6), pp.239~245 (2011), 한국표면공학회
- 김명환, "알카리성 인산-과망간산 용액을 이용한 AZ31 마그네슘 합금의 친환경 화성 처리 및 화성 피막의 특성 평가", 한국표면공학회지, 44(3), pp.82~88 (2011), 한국표면공학회
- 김민정, "과망간산칼륨 용액에서 화학적으로 형성된 AZ31B 마그네슘 합금의 피막 특성평가", 한국표면공학회지, 44(2), pp.44~49 (2011), 한국표면공학회
- S. Moon, "Anodic oxidation of Mg-Sn alloys in alkaline solutions", Corrosion Science, 65, pp.494~ (2012)
- Nguyen Van Phuong, "Zinc Phosphate Conversion Coatings on Magnesium Alloys: A Review", Metals and Materials International, 19(2), pp.273~281 (2013), 대한금속·재료학회[DOI]
- 문성모, "AZ31 마그네슘 합금의 플라즈마전해산화 피막 형성에 미치는 수산화 이온 및 규산 이온의 영향", 한국표면공학회지, 47(4), pp.147~154 (2014), 한국표면공학회[DOI]
- S. Moon, "Corrosion behavior of PEO-treated AZ31Mg alloy in chloride solution", Journal of Solid State Electrochemistry, 18, pp.341~ (2014)
- S. Pommiers, "Alternative conversion coatings to chromate for the protection of magnesium alloys", Corrosion Science, 84, pp.135~ (2014)
- N. V. Phuong, "Comparative corrosion study of zinc phosphate and magnesium phosphate conversion coatings on AZ31 Mg alloy", Materials Letters, 122, pp.341~ (2014)
- C. E. Castano, "Microstructural evolution of cerium-based coatings on AZ31 magnesium alloys", Surface and Coatings Technology, 246, pp.77~ (2014)
- K. Li, "ptimization of process factors for self-healing vanadium-based conversion coating on AZ31 magnesium alloy", Applied Surface Science, 353, pp.811~ (2015)
- S. Y. Jian, "Permanganate conversion coating on AZ31 magnesium alloys with enhanced corrosion resistance", Corrosion Science, 93, pp.301~ (2015)
- S. Moon, "A novel method to detect cathodic second-phase particles in Mg alloys", J Solid State Electrochemistry