Anodic oxidation behavior of AZ31 Mg alloy in aqueous solution containing various NaF concentrations
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This paper deals with anodic oxidation behavior of AZ31 Mg alloy in aqueous solutions containing various NaF concentrations from 0.01 M to 1 M. Three different voltage-time curves and anodic oxide formation behaviors appeared with concentration of NaF in deionized water. When NaF concentration is lower than 0.02 M, the voltage of AZ31 Mg alloy increased linearly and then reached a steady-state value more than 200 V, and large size pits and thin oxide layer were formed. When NaF concentration is between 0.05 M and 0.1 M, the voltage of AZ31 Mg alloy showed large periodic fluctuations of about 30 ~ 50 V around more than 200 V and large number of small particles were observed. If NaF concentration is higher than 0.2 M, PEO films can be formed without visible arcs under solution pH 6.5 ~ 7.5 by F- ions without help of OH- ions.
Abstract
This paper deals with anodic oxidation behavior of AZ31 Mg alloy in aqueous solutions containing various NaF concentrations from 0.01 M to 1 M. Three different voltage-time curves and anodic oxide formation behaviors appeared with concentration of NaF in deionized water. When NaF concentration is lower than 0.02 M, the voltage of AZ31 Mg alloy increased linearly and then reached a steady-state value more than 200 V, and large size pits and thin oxide layer were formed. When NaF concentration is between 0.05 M and 0.1 M, the voltage of AZ31 Mg alloy showed large periodic fluctuations of about 30 ~ 50 V around more than 200 V and large number of small particles were observed. If NaF concentration is higher than 0.2 M, PEO films can be formed without visible arcs under solution pH 6.5 ~ 7.5 by F- ions without help of OH- ions.
참고문헌 (21)
- A. F. alhosseini, "Antibacterial activity of bioceramic coatings on Mg and its alloys created by plasma electrolytic oxidation (PEO): A review", J. Magnesium Alloys, 10, pp.81~96 (2022)
- J. Dong, "Advances in degradation behavior of biomedical magnesium alloys:A review", J. Alloys Compd, 908, pp.164600~164675 (2022)
- R. Moaref, "Application of sustainable polymers for reinforcing bio-corrosion protection of magnesium implants–a review, Sustainable Chem", Sustainable Chem. Pharm, 29, pp.100780~100797 (2022)
- R. Chaharmahali, "Surface characterization and corrosion behavior of calcium phosphate (Ca-P) base composite layer on Mg and its alloys using plasma electrolytic oxidation (PEO): A review", J. Magnesium Alloys, 9, pp.21~40 (2021)
- H. Y. Ha, "Role of Sn in corrosion and passive behavior of extruded Mg-5 wt%Sn", Corros. Sci, 102, pp.355~362 (2016)
- T. Zang, "Corrosion of hot extrusion AZ91magnesium alloy. Part II: Effect of rare earth element neodymium (Nd) on the corrosion behavior of extruded alloy", Corros. Sci, 53, pp.2934~2942 (2011)
- D. Kajanek, "Impact of shot peening on corrosion performance of AZ31 magnesium alloy coated by PEO: Comparison with conventional surface pre-treatments", Surf. Coat. Technol., 446, pp.128773~128792 (2022)
- A. Jangde, "Evolution of PEO coatings on AM50 magnesium alloy using phosphate-based electrolyte with and without glycerol and its electrochemical characterization", J. Magnesium Alloys, 8, pp.692~715 (2020)
- J. Martin, "The influence of metallurgical state of substrate on the efficiency of plasma electrolytic oxidation (PEO) process on magnesium alloy", Materials and Design, 178, pp.107859~107872 (2019)
- S. Moon, "Corrosion behavior of PEOtreated AZ31 Mg alloy in chloride solution", j. Soild State Electrochem, 18, pp.341~346 (2014)
- R. Arrabal, "Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coating", Corros. Sci, 50, pp.1744~1752 (2008)
- E. Matykina, "Plasma electrolytic oxidation of pre-anodized aluminium", Corros. Sci, 51, pp.2897~2905 (2009)
- S. Moon, "Generation mechanism of microdischarges during plasma electrolytic oxidation of Al in aqueous solutions", Corros. Sci, 51, pp.1506~1512 (2009)
- 문성모, "Effect of NaOH Concentration on the PEO Film Formation of AZ31 Magnesium Alloy in the Electrolyte Containing Carbonate and Silicate Ions", 한국표면공학회지, 50(5), pp.308~314 (2017), 한국표면공학회[DOI]
- 권두영, "AZ91 마그네슘 합금의 플라즈마 전해산화 피막 형성 및 물성에미치는 0.1 M NaOH + 0.05 M NaF 용액 중 Na2SiO3 농도의 영향", 한국표면공학회지, 53(2), pp.59~66 (2020), 한국표면공학회
- 문성모, "AZ31 Mg합금의 PEO피막 형성거동에 미치는 인산나트륨 농도의 영향", 한국표면공학회지, 52(5), pp.265~274 (2019), 한국표면공학회[DOI]
- 문성모, "Anodic Oxidation Behavior of AZ31 Magnesium Alloy in Aqueous Electrolyte Containing Various Na2CO3 Concentrations", 한국표면공학회지, 49(4), pp.331~338 (2016), 한국표면공학회[DOI]
- 문성모, "Anodic Oxide Films Formed on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation Method in Electrolytes Containing Various NaF Concentrations", 한국표면공학회지, 49(3), pp.225~230 (2016), 한국표면공학회[DOI]
- 권두영, "인산 및 규산 이온이 포함된 수용액에서 AZ31 마그네슘 합금의 플라즈마전해산화 피막의 구조에 미치는 수산화나트륨 농도의 영향", 한국표면공학회지, 49(1), pp.46~53 (2016), 한국표면공학회[DOI]
- 문성모, "AZ31 마그네슘 합금의 플라즈마전해산화 피막 형성에 미치는 수산화 이온 및 규산 이온의 영향", 한국표면공학회지, 47(4), pp.147~154 (2014), 한국표면공학회[DOI]
- 문성모, "A Blade-Abrading Method for Surface Pretreatment of Mg Alloys", 한국표면공학회지, 48(5), pp.194~198 (2015), 한국표면공학회[DOI]