Effect of Zincate Treatment of As-Cast AZ91 Mg Alloy on Electrodeposition of Copper in a Copper Pyrophosphate Bath
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this work, effect of zincate treatment of AZ91 Mg alloy on the following electrodeposition of copper was examined in a non-cyanide bath containing pyrophosphate ions in view of surface morphology and adhesion of the electrodeposited copper layer. Without zincate treatment, the electrodeposited copper layer showed very porous structure and poor adhesion. On the other hand, the copper layer electrodeposited on the zincatetreated surface showed dense structure and good adhesion. The dissolution rate of AZ91 Mg alloy after the zincate treatment appeared to decrease about 40 times in the copper pyrophosphate bath, as compared to that of the surface without zincate treatment. The porous morphology and poor adhesion of a copper layer on the AZ91 Mg alloy surface without zincate treatment were attributed to small number of nucleation sites of copper because of rapid dissolution of the magnesium substrate in the pyrophosphate bath. Based on the experimental results, it is concluded that the zincate treatment to form a conducting and protecting layer on the AZ91 Mg alloy surface is essential for successful electrodeposition of a copper layer on AZ91 Mg alloy with good adhesion and dense structure in the copper pyrophosphate bath.
Abstract
In this work, effect of zincate treatment of AZ91 Mg alloy on the following electrodeposition of copper was examined in a non-cyanide bath containing pyrophosphate ions in view of surface morphology and adhesion of the electrodeposited copper layer. Without zincate treatment, the electrodeposited copper layer showed very porous structure and poor adhesion. On the other hand, the copper layer electrodeposited on the zincatetreated surface showed dense structure and good adhesion. The dissolution rate of AZ91 Mg alloy after the zincate treatment appeared to decrease about 40 times in the copper pyrophosphate bath, as compared to that of the surface without zincate treatment. The porous morphology and poor adhesion of a copper layer on the AZ91 Mg alloy surface without zincate treatment were attributed to small number of nucleation sites of copper because of rapid dissolution of the magnesium substrate in the pyrophosphate bath. Based on the experimental results, it is concluded that the zincate treatment to form a conducting and protecting layer on the AZ91 Mg alloy surface is essential for successful electrodeposition of a copper layer on AZ91 Mg alloy with good adhesion and dense structure in the copper pyrophosphate bath.
참고문헌 (26)
- J. E. Gray, "Protective coatings on magnesium and its alloys – a critical review", J. Alloy Compd, 336, pp.88~113 (2002)
- Nguyen Van Phuong, "Zinc Phosphate Conversion Coatings on Magnesium Alloys: A Review", Metals and Materials International, 19(2), pp.273~281 (2013), 대한금속·재료학회[DOI]
- X. B. Chen, "Corrosion-resistance electrochemical platings on magnesium alloys : A stateof-the-art review", Corrosion, 68, pp.518~535 (2011)
- G. L. Song, "Corrosion prevention of magnesium alloys" (2013), Woodhead Publishing Limited
- Basit Raza Fazal, "Formation of Cerium Conversion Coatings on AZ31 Magnesium Alloy", 한국표면공학회지, 49(1), pp.1~13 (2016), 한국표면공학회[DOI]
- F. Czerwinski, "Magnesium alloys – Corrosion and surface treatments", pp.153~184 (2011), Croatia
- T. S. N. Sankara Narayanan, "Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: Prospects and challenges", Prog. Mater. Sci, 60, pp.1~71 (2014)
- N. V. Phuong, "Deposition and characterization of E-paint on magnesium alloys", Prog. Org. Coat, 89, pp.91~99 (2015)
- A. Atrens, "Review of recent developments in the field of magnesium corrosion", Adv. Eng. Mater, 17, pp.400~453 (2015)
- L. P. Wu, "Progress of electroplating and electroless plating on magnesium alloy", Trans. Nonferrous Met. Soc. China, 20, pp.630~637 (2010)
- X. P. Lei, "Successful cyanide free plating protocols on magnesium alloys", T. I. Met. Finish, 88, pp.75~80 (2010)
- Nguyen Van Phuong, "Electrodeposition of Copper on AZ91 Mg Alloy in Cyanide Solution", 한국표면공학회지, 49(3), pp.238~244 (2016), 한국표면공학회[DOI]
- Mordechay Schlesinger, "Modern electroplating", pp.33~78 (2010), A John Wiley & Sons, Inc.
- C. A. Huang, "A pretreatment with galvanostatic etching for copper electrodeposition on pure magnesium and magnesium alloys in an alkaline copper-sulfate bath", Electrochim. Acta, 53, pp.7235~7241 (2008)
- P. Zhu, "Copper coating electrodeposited directly onto AZ31magnesium alloy", Anti-Corros. Method. M, 60, pp.127~133 (2013)
- J. Tang, "Effect of copper pretreatment on the zincate process and subsequent copper electrodeposition of AZ31 magnesium alloy", J. Electrochem. Soc., 158, pp.D535~D540 (2011)
- P. Zhu, "Electrodeposition of copper coating on AZ31magnesium alloy", Surf. Eng, 28, pp.796~799 (2012)
- J. C. Ballesteros, "Electrodeposition of copper from noncyanide alkaline solution containing tartrate", Int. J. Electrochem. Sci, 6, pp.2632~2651 (2011)
- J. Tang, "Influence of zincate pretreatment on adhesion strength of a copper electroplating layer on AZ91 D magnesium alloy", Surf. Coat. Tech, 205, pp.3050~3057 (2011)
- C. A. Huang, "Copper electrodeposition on a magnesium alloy(AZ80)with a U-Shaped surface", Materials, 7, pp.7366~7378 (2014)
- O. Radovici, "Some aspects of copper electrodeposition from pyrophosphate electrolytes", Electrodepos. Surface Treat, 2, pp.263~273 (1974)
- 이정훈, "불화칼륨이 첨가된 피로인산구리 도금욕에서 마그네슘합금의 전기도금", 대한금속·재료학회지, 48(3), pp.218~224 (2010), 대한금속·재료학회
- J. Kato, "Magnesium based alloys article and a method thereof", US Patent No: 6,068,938, ~
- "ASTM standard D3359-02", ASTM International, ~ (2004)
- Tohru Watanabe, "Nano-plating: Microstructure control theory of plated film and data base of plated film microstructure" (2004), Elsevier
- M. Hayase, "Electronics Packaging 3", The Electrochemical Society, ~ (2009)