알루미늄 합금의 연속식 양극산화법으로 형성시킨 이중 산화막층의 특성
Properties of double-layered anodizing films on Al alloys formed by two consecutive anodizings
4
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, double-layered anodizing films were formed on Al 5052 and Al 6061 alloys consecutively first in sulfuric acid and then in oxalic acid, and hardness, withstand voltage, surface roughness and acid resistance of the anodizing films were compared with single-layered anodizing films in sulfuric acid and oxalic acid electrolytes. Hardness of the double-layered anodizing film decreased with increasing ratio of inner layer to outer layer for both Al 5052 and Al 6061 alloys, suggesting that outer anodizing film formed in sulfuric acid electrolyte is damaged during the second anodizing in oxalic acid electrolyte. Withstand voltage of the double-layered anodizing films increased with increasing the thickness ratio of inner layer to outer layer. Surface roughness of the double-layered anodizing films were comparable with that of single-layered anodizing film formed in sulfuric acid but higher than that of single layer anodizing film formed in oxalic acid electrolyte. In acid resistance test, all of the double-layered and single-layered anodizing films showed good acid resistance more than 3 h without any visible gas evolution, which is attributable to sealing of pores. Based on the experimental results obtained in this work, it is possible to design a double-layered anodizing film with cost-effectiveness and improved physical and electrical properties by combining two consecutive anodizing processes of sulfuric acid anodizing and oxalic acid anodizing methods.
Abstract
In this study, double-layered anodizing films were formed on Al 5052 and Al 6061 alloys consecutively first in sulfuric acid and then in oxalic acid, and hardness, withstand voltage, surface roughness and acid resistance of the anodizing films were compared with single-layered anodizing films in sulfuric acid and oxalic acid electrolytes. Hardness of the double-layered anodizing film decreased with increasing ratio of inner layer to outer layer for both Al 5052 and Al 6061 alloys, suggesting that outer anodizing film formed in sulfuric acid electrolyte is damaged during the second anodizing in oxalic acid electrolyte. Withstand voltage of the double-layered anodizing films increased with increasing the thickness ratio of inner layer to outer layer. Surface roughness of the double-layered anodizing films were comparable with that of single-layered anodizing film formed in sulfuric acid but higher than that of single layer anodizing film formed in oxalic acid electrolyte. In acid resistance test, all of the double-layered and single-layered anodizing films showed good acid resistance more than 3 h without any visible gas evolution, which is attributable to sealing of pores. Based on the experimental results obtained in this work, it is possible to design a double-layered anodizing film with cost-effectiveness and improved physical and electrical properties by combining two consecutive anodizing processes of sulfuric acid anodizing and oxalic acid anodizing methods.
참고문헌 (14)
- 정용수, "실용표면처리기술시리즈 제5권 양극산화" (2014), 화신문화㈜
- 정나겸, "알루미늄 합금 소재의 옥살산 아노다이징 피막 물성 연구", 한국표면공학회지, 53(5), pp.249~256 (2020), 한국표면공학회
- M. Ardelean, "Surface treatments for aluminium alloys", IOP Conf. Series : Mater. Sci. Eng, 294, pp.012042~ (2018)
- S. Wernick, "The surface Treatment and Finishing of Aluminium and its Alloys" (1987), Finishing Pubilications Ltd
- 탁용석, "금속알루미늄의 전기화학적 성질과 응용", 공업화학, 17(4), pp.335~342 (2006), 한국공업화학회
- 박철기, "Al6061합금의 PEO 피막 형성에 미치는 AC 전류밀도의 영향", 한국표면공학회지, 52(3), pp.138~144 (2019), 한국표면공학회[DOI]
- 염희택, "개정 도금.표면처리", pp.311~335 (2009), 문운당
- 문성모, "금속의 양극산화처리 기술", 한국표면공학회지, 51(1), pp.1~11 (2018), 한국표면공학회[DOI]
- W. Lee, "Porous Anodic Aluminum Oxide : Anodization and Templated Synthesis of Functional Nanostructures", Chem. Rev, 114, pp.7487~7556 (2014)
- 지혜정, "알루미늄 5052 합금의 산화피막 성장 및 내식성 연구", 한국표면공학회지, 51(6), pp.372~380 (2018), 한국표면공학회[DOI]
- S. M. JUNAID ZAIDI, "Influence of Anodization Temperature on The Structural Features of First-Step Anodized Nanoporous Alumina and of Commercial Aluminum Substrate", Dig. J. Nanomater. Bios, 12, pp.1175~1186 (2017)
- 최용찬, "Effects of Anodizing Voltages and Corresponding Current Densities on Self-ordering Process of Nanopores in Porous Anodic Aluminas Anodized in Oxalic and Sulfuric Acids", Journal of the Korean Physical Society, 55(2), pp.835~840 (2009), 한국물리학회
- V. Lopez, "Sealing of Anodic Films Obtained in Oxalic Acid Baths", Suf. Coat. Technol, 124, pp.76~84 (2000)
- 강수영, "알루미늄의 아노다이징과 나노 다이아몬드 분말 봉공처리에 의한 내식성과 내마모성 향상에 관한 연구", 한국표면공학회지, 47(3), pp.121~127 (2014), 한국표면공학회[DOI]