후열처리에 의한 알루미늄 산화층의 특성 향상
Enhanced properties of aluminum oxide layers with post heat treatment
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Anodization is widely used to enhance the properties of aluminum, such as hardness, electric resistance, abrasion resistance, corrosion resistance etc. But these properties can be enhanced with additional process. According to the partial crystallization of oxide layer with post heat treatment, enhanced hardness can be expected with partial crystallization. In this study, post heat treatments were applied to the anodized aluminum alloys of Al6061 to achieve the partial crystallization, and crystallizations were evaluated with the reduced breakdown voltages. Interestingly, remarkable enhanced hardness (21~29%), abrasion resistance (26~62%), and reduced breakdown voltage (24~44%) were observed for the sulfuric acid anodized samples when we annealed the anodized samples with 1hour post heat treatment at 360oC. For the Al5052 alloys, a lot of cracks were observed when we applied the post heat treatment
Abstract
Anodization is widely used to enhance the properties of aluminum, such as hardness, electric resistance, abrasion resistance, corrosion resistance etc. But these properties can be enhanced with additional process. According to the partial crystallization of oxide layer with post heat treatment, enhanced hardness can be expected with partial crystallization. In this study, post heat treatments were applied to the anodized aluminum alloys of Al6061 to achieve the partial crystallization, and crystallizations were evaluated with the reduced breakdown voltages. Interestingly, remarkable enhanced hardness (21~29%), abrasion resistance (26~62%), and reduced breakdown voltage (24~44%) were observed for the sulfuric acid anodized samples when we annealed the anodized samples with 1hour post heat treatment at 360oC. For the Al5052 alloys, a lot of cracks were observed when we applied the post heat treatment
참고문헌 (14)
- S. Wernick, "The surface Treatment and Finishing of Aluminum and its Alloys" (1987), Finishing Publications Ltd
- 정용수, "실용표면처리기술시리즈 제5권 양극산화" (2014), 화신문화㈜
- 탁용석, "금속알루미늄의 전기화학적 성질과 응용", 공업화학, 17(4), pp.335~342 (2006), 한국공업화학회
- 박철기, "Al6061합금의 PEO 피막 형성에 미치는 AC 전류밀도의 영향", 한국표면공학회지, 52(3), pp.138~144 (2019), 한국표면공학회[DOI]
- M. Ardelean, "Surface treatments for aluminum alloys", IOP Conf. Series: Mater. Sci. Eng, 294, pp.012042~ (2018)
- J. Lee, "Cr2O3 Sealing of Anodized Aluminum Alloy by Heat Treatment", Procedia Eng, 10, pp.2803~2808 (2011)
- 강수영, "첨가제에 의한 경질 크롬 도금 층의 열처리 후기계적 특성 향상에 관한 연구", 한국표면공학회지, 47(3), pp.116~120 (2014), 한국표면공학회[DOI]
- G. D. Sulka, "Highly Ordered Anodic Porous Alumina Formation by Self-Organized Anodizing", Nanostruct. Mat. Electrochem, 1, pp.1~116 (2008)
- J. Miao, "Effects of alloying elements on structure of plasma electrolytic oxidation ceramic coatings on aluminum alloys", Appl. Mechanics Mater, 310, pp.85~89 (2013)
- J. Chang, "Effect of Heat-Treatment on Characteristics of Anodized Aluminum Oxide Formed in Ammonium Adipate Solution", J. Electrochem. Soc, 151, pp.B188~B194 (2004)
- Y. Goueffon, "Black anodic coatings for space applications: study of the process parameters characteristics and mechanical properties", J. Mat. Processing Tech, 209, pp.5145~5151 (2009)
- D. Fang, "Effect of heat treatment on morphology, crystalline structure and photocatalysis properties of TiO2nanotubes on Ti substrate and freestanding membrane", Appl. Surf. Sci, 257, pp.6451~6461 (2011)
- B. Sathyaseelan, "Phase Transition Behavior of Nanocrystalline Al2O3Powders", Soft Nanosci. Lett, 3, pp.69~74 (2013)
- V. Dehnavi, "Correlation between plasma electrolytic oxidation treatment stages and coating microstructure on aluminum under unipolar pulsed DC mode", Surf. Coatings Tech, 269, pp.91~99 (2015)