Anodic Oxide Films Formed on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation Method in Electrolytes Containing Various NaF Concentrations
2
조회
0
다운로드
13
인용
0
참고문헌
키워드
초록
The present work was conducted to investigate the effects of NaF concentration in phosphate and silicatecontaining alkaline electrolyte on the morphology, thickness, surface roughness and hardness of anodic oxide films formed on AZ31 Mg alloy by plasma electrolytic oxidation (PEO) method. The PEO films showed flat surface morphology with pores in the absence of NaF in the electrolyte, but nodular features appeared on the PEO film surface prepared in NaF-containing electrolyte. Numerous pores ranging from 1 to 20 μm in size were observed in the PEO films and the size of pores decreased with increasing NaF concentration in the electrolyte. Surface roughness and thickness of PEO films showed increases with increasing NaF concentration. Hardness of the PEO films also increased with increasing NaF concentration. It was noticed that hardness of inner part of the PEO films is lower than that of outer part of them, irrespective of the concentration of NaF. The low hardness of PEO films was explained by the presence of a number of small size pores less than 2 μm near the PEO film/substrate interface.
Abstract
The present work was conducted to investigate the effects of NaF concentration in phosphate and silicatecontaining alkaline electrolyte on the morphology, thickness, surface roughness and hardness of anodic oxide films formed on AZ31 Mg alloy by plasma electrolytic oxidation (PEO) method. The PEO films showed flat surface morphology with pores in the absence of NaF in the electrolyte, but nodular features appeared on the PEO film surface prepared in NaF-containing electrolyte. Numerous pores ranging from 1 to 20 μm in size were observed in the PEO films and the size of pores decreased with increasing NaF concentration in the electrolyte. Surface roughness and thickness of PEO films showed increases with increasing NaF concentration. Hardness of the PEO films also increased with increasing NaF concentration. It was noticed that hardness of inner part of the PEO films is lower than that of outer part of them, irrespective of the concentration of NaF. The low hardness of PEO films was explained by the presence of a number of small size pores less than 2 μm near the PEO film/substrate interface.
참고문헌 (30)
- J. Liang, "Effect of potassium fluoride in electrolytic solution on the structure and properties of microarc oxidation coatings on magnesium alloy", Applied Surface Science, 252, pp.345~351 (2005)
- H. Duan, "Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D", Electrochimica Acta, 52, pp.3785~3793 (2007)
- R. Arrabal, "Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings", Corrosion Science, 50, pp.1744~1752 (2008)
- J. Liang, "Electrochemical corrosion behaviour of plasma electrolytic oxidation coatings on AM50magnesium alloy formed in silicate and phosphate based electrolytes", Electrochimica Acta, 54, pp.3842~3850 (2009)
- S. Moon, "Anodic oxidation of Mg-Sn alloys in alkaline solutions", Corrosion Science, 65, pp.494~501 (2012)
- S. Yagi, "Surface modification of ACM522 magnesium alloy by plasma electrolytic oxidation in phosphate electrolyte", Corrosion Science, 57, pp.74~80 (2012)
- B. Kazanski, "Fluoride ions as modifiers of the oxide layer produced by plasma electrolytic oxidation on AZ91D magnesium alloy", Applied Surface Science, 287, pp.461~466 (2013)
- S. Moon, "Corrosion behavior of PEO-treated AZ31Mg alloy in chloride solution", Journal of Solid State Electrochemistry, 18, pp.341~346 (2014)
- Stojadinović, Stevan, "Characterization of plasma electrolytic oxidation of magnesium alloy AZ31 in alkaline solution containing fluoride", Surface and Coatings Technology, 273, pp.1~11 (2015)
- X. Lu, "Insights into plasma electrolytic oxidation treatment with particle addition", Corrosion Science, 101, pp.201~207 (2015)
- M. Mohedano, "Silicate-based Plasma Electrolytic Oxidation(PEO)coatings with incorporated CeO 2 particles on AM50 magnesium alloy", Materials & Design, 86, pp.735~744 (2015)
- X. Lu, "Plasma electrolytic oxidation coatings on Mg alloy with addition of SiO 2 particles", Electrochimica Acta, 187, pp.20~33 (2016)
- S. Moon, "3-Dimensional structures of open-pores in PEO films on AZ31Mg alloy", Materials Letters, 161, pp.439~441 (2016)
- L. Chai, "Masazumi Okido, Anodizing of magnesium alloy AZ31 in alkaline solutions with silicate under continuous sparking", Corros. Sci, 50, pp.3274~ (2008)
- A. Yabuki, "Anodic films formed on magnesium in organic, silicate-containing electrolytes", Corros. Sci, 51, pp.793~ (2009)
- T. S. Lim, "Electrochemical corrosion properties of CeO2-containing coatings on AZ31 magnesium alloys prepared by plasma electrolytic oxidation", Corros. Sci, 62, pp.104~ (2012)
- S. Verdier, "Formation, structure and composition of anodic films on AM60 magnesium alloy obtained by DC plasma anodising", Corros. Sci, 47, pp.1429~ (2005)
- C. L. Chu, "Effects of sealing treatment on corrosion resistance and degradation behavior of micro-arc oxidized magnesium alloy wires", Applied Surface Science, 271, pp.271~ (2013)
- U. Malayoglu, "Influence of post-treatment on the corrosion resistance of PEO coated AM50B and AM60B Mg alloys", Surface and Coatings Technology, 205, pp.1793~ (2010)
- Y. -I. Choi, "Synergistic corrosion protection for AZ31 Mg alloy by anodizing and stannate post-sealing treatments", Electrochim. Acta, 97, pp.313~ (2013)
- G. -L. Song, "An irreversible dipping sealing technique for anodized ZE41 Mg alloy", Surface and Coatings Technology, 203, pp.3618~ (2009)
- 문성모, "A Blade-Abrading Method for Surface Pretreatment of Mg Alloys", 한국표면공학회지, 48(5), pp.194~198 (2015), 한국표면공학회[DOI]
- G. Bian, "Effects of electrolytes on the growth behavior, microstructure and tribological properties of plasma electrolytic oxidation coatings on a ZA27alloy", Surface and Coatings Technology, 277, pp.251~257 (2015)
- E. Matykina, "Real-time imaging of coating growth during plasma electrolytic oxidation of titanium", Electrochimica Acta, 53, pp.1987~1994 (2007)
- Y. Cheng, "A comparison of plasma electrolytic oxidation of Ti-6Al-4V and Zircaloy-2 alloys in a silicate-hexametaphosphate electrolyte", Electrochimica Acta, 165, pp.301~313 (2015)
- Y. Cheng, "The influences of microdischarge types and silicate on the morphologies and phase compositions of plasma electrolytic oxidation coatings on Zircaloy-2", Corrosion Science, 59, pp.307~315 (2012)
- Y. Cheng, "New findings on properties of plasma electrolytic oxidation coatings from study of an Al–Cu–Li alloy", Electrochimica Acta, 107, pp.358~378 (2013)
- 문성모, "AZ31 마그네슘 합금의 플라즈마전해산화 피막 형성에 미치는 수산화 이온 및 규산 이온의 영향", 한국표면공학회지, 47(4), pp.147~154 (2014), 한국표면공학회[DOI]
- 권두영, "인산 및 규산 이온이 포함된 수용액에서 AZ31 마그네슘 합금의 플라즈마전해산화 피막의 구조에 미치는 수산화나트륨 농도의 영향", 한국표면공학회지, 49(1), pp.46~53 (2016), 한국표면공학회[DOI]
- 문성모, "황산용액에서 Al7075 합금 표면의 양극산화피막 형성거동", 한국표면공학회지, 47(4), pp.155~161 (2014), 한국표면공학회[DOI]