펄스 전류 하에서 AZ31 마그네슘 합금의 플라즈마전해산화 피막의 형성 거동
PEO Film Formation Behavior of AZ31 Mg Alloy under Pulse Current
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, PEO (plasma electrolytic oxidation) film formation behavior of AZ31 Mg alloy under application of 300 Hz pulse current was studied by the analyses of V-t curve, arc generation behavior, PEO film thickness and morphology of PEO films with treatment time in 0.05 M NaOH + 0.05 M Na2SiO3 + 0.1 M NaF solution. PEO films was observed to grow after 10 s of application of pulse current together with generation of micro-arcs. PEO film grew linearly with treatment time at a growth rate of about 5.58 ㎛/min at 200 mA/cm2 of pulse current but increasing rate of film formation voltage became lowered largely with increasing treatment time after passing about 250 V, suggesting that resistivity of PEO films during micro-arc generation decreases with increasing film formation voltage at more than 250 V.
Abstract
In this study, PEO (plasma electrolytic oxidation) film formation behavior of AZ31 Mg alloy under application of 300 Hz pulse current was studied by the analyses of V-t curve, arc generation behavior, PEO film thickness and morphology of PEO films with treatment time in 0.05 M NaOH + 0.05 M Na2SiO3 + 0.1 M NaF solution. PEO films was observed to grow after 10 s of application of pulse current together with generation of micro-arcs. PEO film grew linearly with treatment time at a growth rate of about 5.58 ㎛/min at 200 mA/cm2 of pulse current but increasing rate of film formation voltage became lowered largely with increasing treatment time after passing about 250 V, suggesting that resistivity of PEO films during micro-arc generation decreases with increasing film formation voltage at more than 250 V.
참고문헌 (19)
- N. V. Phuong, "Corrosion performance of magnesium phosphate conversion coating on AZ31 magnesium", Trans. Nonferrous Met. Soc. China, 27, pp.1087~1095 (2017)
- Basit Raza Fazal, "Formation of Cerium Conversion Coatings on AZ31 Magnesium Alloy", 한국표면공학회지, 49(1), pp.1~13 (2016), 한국표면공학회[DOI]
- Basit Raza Fazal, "Effect of Fluoride Conversion Coating on the Corrosion Resistance and Adhesion of E-painted AZ31 Magnesium Alloy", 한국표면공학회지, 49(5), pp.395~400 (2016), 한국표면공학회[DOI]
- 권두영, "AZ91 마그네슘 합금의 플라즈마 전해산화 피막 형성 및 물성에미치는 0.1 M NaOH + 0.05 M NaF 용액 중 Na2SiO3 농도의 영향", 한국표면공학회지, 53(2), pp.59~66 (2020), 한국표면공학회
- S. L. Aktuğ, "Effect of Na2SiO3·5H2O concentration on microstructure and mechanical properties of plasma electrolytic oxide coatings on AZ31 Mg alloy produced by twin roll casting", Ceram. Int, 42, pp.1246~ (2016)
- 문성모, "AZ31 마그네슘 합금의 플라즈마전해산화 피막 형성에 미치는 수산화 이온 및 규산 이온의 영향", 한국표면공학회지, 47(4), pp.147~154 (2014), 한국표면공학회[DOI]
- H. Duan, "Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D", Electrochim, 52, pp.3785~3793 (2007)
- 문성모, "Effect of NaOH Concentration on the PEO Film Formation of AZ31 Magnesium Alloy in the Electrolyte Containing Carbonate and Silicate Ions", 한국표면공학회지, 50(5), pp.308~314 (2017), 한국표면공학회[DOI]
- 문성모, "Anodic oxidation behavior of AZ31 Mg alloy in aqueous solution containing various NaF concentrations", 한국표면공학회지, 55(4), pp.196~201 (2022), 한국표면공학회
- 문성모, "Anodic Oxide Films Formed on AZ31 Magnesium Alloy by Plasma Electrolytic Oxidation Method in Electrolytes Containing Various NaF Concentrations", 한국표면공학회지, 49(3), pp.225~230 (2016), 한국표면공학회[DOI]
- S. Stojadinović, "Characterization of plasma electrolytic oxidation of magnesium alloy AZ31 in alkaline solution containing fluoride", Surf. Coat. Technol, 273, pp.1~11 (2015)
- B. Kazanski, "Fluoride ions as modifiers of the oxide layer produced by plasma electrolytic oxidation on AZ91D magnesium alloy", Appl. Surf. Sci, 287, pp.461~466 (2013)
- J. Liang, "Effect of potassium fluoride in electrolytic solution on the structure and properties of microarc oxidation coatings on magnesium alloy", Appl. Surf. Sci, 252, pp.345~351 (2005)
- 문성모, "Anodic Oxidation Behavior of AZ31 Magnesium Alloy in Aqueous Electrolyte Containing Various Na2CO3 Concentrations", 한국표면공학회지, 49(4), pp.331~338 (2016), 한국표면공학회[DOI]
- 문성모, "AZ31 Mg합금의 PEO피막 형성거동에 미치는 인산나트륨 농도의 영향", 한국표면공학회지, 52(5), pp.265~274 (2019), 한국표면공학회[DOI]
- S. Yagi, "Surface modification of ACM522 magnesium alloy by plasma electrolytic oxidation in phosphate electrolyte", Corros. Sci, 57, pp.74~80 (2012)
- J. Liang, "Electrochemical corrosion behaviour of plasma electrolytic oxidation coatings on AM50 magnesium alloy formed in silicate and phosphate based electrolytes", Electrochim. Acta, 54, pp.3842~3850 (2009)
- R. Arrabal, "Corrosion resistance of WE43 and AZ91D magnesium alloys with phosphate PEO coatings", Corros. Sci, 50, pp.1744~1752 (2008)
- 문성모, "A Blade-Abrading Method for Surface Pretreatment of Mg Alloys", 한국표면공학회지, 48(5), pp.194~198 (2015), 한국표면공학회[DOI]