ZnO/Cu/ZnO 박막의 차량용 저방사 및 전기광학적 특성 연구
The emissivity and opto-electrical properties of ZnO/Cu/ZnO thin films for the vehicle applications
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Transparent conducting films having a three layered structure of ZnO/Cu/ZnO (ZCZ) were deposited onto the glass substrates by using RF and DC magnetron sputtering at room temperature. The emissivity and opto-electrical properties of the films were investigated with a varying thickness(5, 10, 15 nm) of the Cu interlayer. With increasing the Cu thickness to 15 nm, the films showed a enhanced electrical properties. Although ZnO 30/Cu 15/ZnO 30 nm film shows a lower resistivity of 5.2×10−5 Ωcm, it’s visible transmittance is deteriorated by increased optical absorbtion of the films. In addition, X-ray diffraction patterns indicated that the insertion of Cu interlayer improve the grain size of ZnO films, which is favor for the electrical and optical properties of transparent conducting films. From the observed low emissivity of the films, it is concluded that the ZCZ thin films with optimal thickness of Cu interlayer can be applied effectively for the car’s window coating materials.
Abstract
Transparent conducting films having a three layered structure of ZnO/Cu/ZnO (ZCZ) were deposited onto the glass substrates by using RF and DC magnetron sputtering at room temperature. The emissivity and opto-electrical properties of the films were investigated with a varying thickness(5, 10, 15 nm) of the Cu interlayer. With increasing the Cu thickness to 15 nm, the films showed a enhanced electrical properties. Although ZnO 30/Cu 15/ZnO 30 nm film shows a lower resistivity of 5.2×10−5 Ωcm, it’s visible transmittance is deteriorated by increased optical absorbtion of the films. In addition, X-ray diffraction patterns indicated that the insertion of Cu interlayer improve the grain size of ZnO films, which is favor for the electrical and optical properties of transparent conducting films. From the observed low emissivity of the films, it is concluded that the ZCZ thin films with optimal thickness of Cu interlayer can be applied effectively for the car’s window coating materials.
참고문헌 (10)
- F. Djeffal, "Efficiency improvement of CIGS solar cells using RF sputtered TCO", Ag, Ceramics International, pp.2022, 48[DOI]
- 노재승, "흑연표면의 열방사율 측정시 결정립 배향성의 영향", 한국표면공학회지, 42(2), pp.95~101 (2009), 한국표면공학회
- M. Yahya, "Effect of oxygen plasma on ITO surface and OLED physical properties", Microelectronics Reliability, 144, pp.114981~ (2023)
- Yu Qiang, "The study of optical-electrical properties of ZnO(AZO)", Si heterojunction, 2024, pp.57, 111~118[DOI]
- J. H. Jeon, "Influence of a Ni buffer layer on the optical and electrical properties of GZO", Ni bi-layered films, 2015, pp.639, 1~4
- Y. S. Kim, "ITO", Au, Applied Surface Science, pp.2007, 254[DOI]
- 이동민, "Cu2ZnSn(S,Se)4 (CZTSSe) 박막 태양전지 적용을 위한 마그네트론 스퍼터링으로 증착된 AZO", Ag, 한국재료학회지, pp.2020, 30(6)[DOI]
- B. D. Cullity, "Elements of X-ray diffraction", pp.101~102 (1978), AddisonWesley
- 장진규, "Ag 중간층이 SnO2 박막의 광학적, 전기적 특성에 미치는 영향", 한국표면공학회지, 54(3), pp.119~123 (2021), 한국표면공학회
- G. Haacke, "New figure of merit for transparent conductors", Journal of Applied Physics, 47, pp.4086~4089 (1976)