강판 마감형 조립식 벽패널 복사냉난방시스템의 냉난방 방열 특성 평가
Evaluation of Heating and Cooling Thermal Output Characteristics of Prefabricated Steel Wall Panel System for Radiant Heating and Cooling
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Recently the radiant panel heating and cooling system has been regarded as an alternative of low temperature heating and high temperature cooling by applying the renewable energy sources to the heating and cooling of buildings. Especially this system can be used as HVAC system alternatives in super high-rise buildings for energy saving and thermal comfort. Also it can be possible to reduce the plenum space because the minimum ventilation air will be supplied into the space. This study focused on the evaluation the basic characteristics of thermal output in prefabricated steel wall panel system for radiant heating and cooling. In order to evaluate the thermal output according to both various supply water temperatures and supply water flow rates, three-dimensional dynamic heat transfer analysis was performed. As results, for the heating mode, thermal output increased by 26% with the supply temperature increasing by 5℃. The surface temperature of panels range within $1{\sim}3^{\circ}C$. For the cooling mode, thermal output decreased by 18.2% with the supply temperature increasing by $2^{\circ}C$. The surface temperature of panels range within $0.5{\sim}1^{\circ}C$ and it was shown the even temperature distribution.
Abstract
Recently the radiant panel heating and cooling system has been regarded as an alternative of low temperature heating and high temperature cooling by applying the renewable energy sources to the heating and cooling of buildings. Especially this system can be used as HVAC system alternatives in super high-rise buildings for energy saving and thermal comfort. Also it can be possible to reduce the plenum space because the minimum ventilation air will be supplied into the space. This study focused on the evaluation the basic characteristics of thermal output in prefabricated steel wall panel system for radiant heating and cooling. In order to evaluate the thermal output according to both various supply water temperatures and supply water flow rates, three-dimensional dynamic heat transfer analysis was performed. As results, for the heating mode, thermal output increased by 26% with the supply temperature increasing by 5℃. The surface temperature of panels range within $1{\sim}3^{\circ}C$. For the cooling mode, thermal output decreased by 18.2% with the supply temperature increasing by $2^{\circ}C$. The surface temperature of panels range within $0.5{\sim}1^{\circ}C$ and it was shown the even temperature distribution.
참고문헌 (8)
- 김광우, "초고층 오피스용 냉난방 및 다기능 조립식 패널시스템 개발", 건축환경설비, 5(2) (2011)
- 강재식, "저온난방에 의한 IHCS 온돌시스템의 열특성", 대한건축학회 학술발표대회 논문집 계획계, 24(2), pp.2004~ (2004)
- 조정식, "지열원 저온 복사난방의 적용을 위한 해석적 고찰", 지열에너지저널, 7(2) (2011)
- 홍희기, "저온 온돌 난방에 의한 제어특성과 온열쾌적성", 대한설비공학회 학술발표대회 논문집 (2011)
- 이영주, "폴리프로필렌 모세유관 냉방시스템의 적용에 관한 실험적 연구", 설비공학 논문집, 17(9), pp.873~881 (2005), 대한설비공학회
- Jan Babiak, "Low temperature heating and high temperature cooling", REHVA Guidebook no.7, REHVA, ~ (2007)
- Physibel, "Physibel Voltra Manual", ~ (2009)
- Shigeru Okamoto, "A simplified calculation method for estimating heat flux from ceiling radiant panels", Energy and Buildings, 42(1) (2010)