고온용 폴리머 윤활 베어링의 특성 연구
Preparation and Characterization of Polymer Lubricating Bearings
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Microporous polymer lubricants(MPLs) are solid polymer materials containing micropores which are filled with liquid lubricants, and which are molded or formed to suit rolling bearings or other machine parts requiring lubrication. MPLs can be effectively applied to provide long-term, maintenance-free lubrication of a variety of machine elements without fully replacing of oils and greases. The application of rolling bearings packed fully with an MPL could reduce or eliminate the problems such as grease deterioration, leakage, underlubrication caused by insertion of water or foreign matters under severe operation conditions. This paper discuss the application of MPLs for lubrication of rolling ball bearings. Two different MPLs were synthesized and the features of MPLs were tested. Characteristics of the bearings which are packed fully with synthesized MPLs were investigated using SEM, TG/DSC, extents of oil leakage, OIT, and life time test. After these preliminary tests twelve MPLs were synthesized and evaluated by measuring extents of oil leakage and OIT values. Then synthesis conditions for the optimum MPL were selected by SSRED(Six Sigma Robust Engineering Design) program using extents of oil leakage and OIT values respectively. The optimum MPL by means of OIT value showed higher performance such as long life time and application at higher temperature of 140oC than previous temperature of 100oC
Abstract
Microporous polymer lubricants(MPLs) are solid polymer materials containing micropores which are filled with liquid lubricants, and which are molded or formed to suit rolling bearings or other machine parts requiring lubrication. MPLs can be effectively applied to provide long-term, maintenance-free lubrication of a variety of machine elements without fully replacing of oils and greases. The application of rolling bearings packed fully with an MPL could reduce or eliminate the problems such as grease deterioration, leakage, underlubrication caused by insertion of water or foreign matters under severe operation conditions. This paper discuss the application of MPLs for lubrication of rolling ball bearings. Two different MPLs were synthesized and the features of MPLs were tested. Characteristics of the bearings which are packed fully with synthesized MPLs were investigated using SEM, TG/DSC, extents of oil leakage, OIT, and life time test. After these preliminary tests twelve MPLs were synthesized and evaluated by measuring extents of oil leakage and OIT values. Then synthesis conditions for the optimum MPL were selected by SSRED(Six Sigma Robust Engineering Design) program using extents of oil leakage and OIT values respectively. The optimum MPL by means of OIT value showed higher performance such as long life time and application at higher temperature of 140oC than previous temperature of 100oC
참고문헌 (9)
- Jamison,W.E, "Applications of Microporous Polymer Lubricants", Lubrication Engineering, 38(12), pp.758~761 (1982)
- Kim,S.K., "A Study on Synthesis and Characteristics of the Optimum Urea Type Greases for Rolling Bearings", J.KSTLE, 22(5), pp.269~275 (2006)
- Jamison,W.E., "New Developments in Microporous Polymer Lubricants", Lubrication Engineering, 41(5), pp.274~279 (1984)
- Rhee,I.S, "Development of a New Oxidtion Stbility Test Method for Grease Using a Pressure Differential Scanning Calorimeter", NLGI’s 57th Annual Meeting, pp.2~11 (1990)
- Keller,M.A., "Behavior of High Temperature Lubricants in a Pressure Differential Scanning Calorimeter", Tran.Trans, 41(4), pp.586~592 (1998)
- 한종대, "구름베어링용 그리이스의 산화특성과 수명 평가", 공업화학, 15(8), pp.907~912 (2004), 한국공업화학회
- Turell,M.B., "A Study of the Nanostructure and Tensile Properties of Ultra-high Molecular Weight Polyethylene", Biomaterials, 25, pp.3389~3398 (2004)
- Simis,K.S., "The Combined Effects of Crosslinking and High Crystallinity on the Microstructural and Mechanical Properties of Ultra High Molecular Weight Polyethylene", Biomaterials, 27, pp.1688~1694 (2006)
- Liu,C.Z., "Tribological Behaviours of PA", UHMWPE Blend under Dry and Lubricating Condition, 2006, pp.260, 109~115