무급유 베어링 최적 소결조건 도출을 위한 첨가제에 따른 겉보기 기공률 특성 평가
An Evaluation of Apparent Porosity Based on the Filler to Detect Optimum Sintering Conditions of Oilless Bearing
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The object of this paper is to examine the optimum sintering condition which have excellent mechanical properties compared to the conventional oilless bearing. It is shown that the sintering rate is the most excellent at 850°C, especially KAB-23, KAB-23G, PBF-8 specimens. With increasing the nitrogen injection rate, the apparent porosity increased gradually. In contrast, with increasing the hydrogen injection rate, the apparent porosity decreased gradually. It is shown that the apparent porosity is very useful in the range of nitrogen injection rate 2Nm3 and hydrogen injection rate 10Nm3.
Abstract
The object of this paper is to examine the optimum sintering condition which have excellent mechanical properties compared to the conventional oilless bearing. It is shown that the sintering rate is the most excellent at 850°C, especially KAB-23, KAB-23G, PBF-8 specimens. With increasing the nitrogen injection rate, the apparent porosity increased gradually. In contrast, with increasing the hydrogen injection rate, the apparent porosity decreased gradually. It is shown that the apparent porosity is very useful in the range of nitrogen injection rate 2Nm3 and hydrogen injection rate 10Nm3.
참고문헌 (8)
- Hyung-Do Yang, "Evaluation on Performance of Sintered Oilless Bearing with Cu-coated Ferrous Powder as alter- native of Bronze Powder", International Symposium on Advanced Powder Metallurgy (2003)
- K.Friedrich, "Friction and wear of polymer composites" (1986), Elsevier
- J. C. Jaeger, "Moving sources of heat and temperature at sliding contacts", J. and Proc. Roy. Soc, 76, pp.203~224 (1943)
- M. F. Ashby, "Temperature maps for frictional heating in dry sliding", STLE Tribology Trans, 34(4), pp.577~587 (1991)
- Ho-Sung Kong, "An Evaluation Analysis on the Maximum Allowable PV Value of Oilless Composite Bearing Materials", Journal of KSTLE, 11(1), pp.27~36 (1995)
- Ho-Sung Kong, "Friction and Wear at Dry Sliding Low Carbon Steel Surfaces Under Vacuum Conditions", Journal of KSTLE, 10(3), pp.29~38 (1994)
- Chang-Wook Kim, "A Study on Manufacturing and Characteristics of Solid Lubricant Oilless Bearing", Korean Journal of Materials Research, 11(11), pp.991~996 (2001)
- Soo-Il Byun, "A Study of the PTFE Coating on Metal Bearing", pp.1987