WC/C 박막의 윤활접촉하의 마멸기구
The Wear Mechanism of Carbon(WC/C) Thin Film in Lubricated Contact
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The running-in behaviour of the metal carbon coating (WC/C) was evaluated with regard to its applicability as wear-resistant coating for key components in engines. Reciprocating wear tests under lubricated condition employing an oscillating friction wear tester were performed to investigate the tribological behaviors of the coatings in ambient environment. Confocal microscopy and scanning electron microscopy were used to observe worn surfaces and the wear scars on the steel balls. Elemental composition of the coating and worn surfaces were characterized using Auger electron spectroscopy. The friction behavior of WC/C coating was comparable to common carbon-based coatings. Thin tribofilm was formed on the worn surface of the steel ball due to material transfer and tribochemical reaction whereas there was no evidence of tribofilm generation on the coating surface. indicating the chemical innertness of WC/C coating.
Abstract
The running-in behaviour of the metal carbon coating (WC/C) was evaluated with regard to its applicability as wear-resistant coating for key components in engines. Reciprocating wear tests under lubricated condition employing an oscillating friction wear tester were performed to investigate the tribological behaviors of the coatings in ambient environment. Confocal microscopy and scanning electron microscopy were used to observe worn surfaces and the wear scars on the steel balls. Elemental composition of the coating and worn surfaces were characterized using Auger electron spectroscopy. The friction behavior of WC/C coating was comparable to common carbon-based coatings. Thin tribofilm was formed on the worn surface of the steel ball due to material transfer and tribochemical reaction whereas there was no evidence of tribofilm generation on the coating surface. indicating the chemical innertness of WC/C coating.
참고문헌 (8)
- B.Bhushan, "Modern Tribology Handbook" (2000), CRC Press
- K. Holmberg, "Coatings Tribology" (1994), Elsevier Press
- F. Svahn, "On the Effect of Surface Topography and Humidity on Lubricated Running-in of a Carbon Based Coating", Wear, 261, pp.1237~1246 (2006)
- D.Leonhardt, "Generation of Electron-beam Produced Plasmas and Applications to Surface Modification", Surface and Coatings Technology, 177-178, pp.682~687 (2004)
- M. Yoshino, "Deposition of SiC films by Ionenhanced Plasma Chemical Vapor Deposition Using Tetramethylsilane+H2", Thin Solid Films, 492, pp.207~211 (2005)
- K.Oguri, "Low Friction Coatings of Diamond-like Carbon with Silicon Prepared by Plasma Assisted Chemical Vapor Deposition", J.Mater.Res, 5, pp.259~268 (1991)
- "Fron Oerikon Balzers web page"[URL]
- B.Podgornik, "DLC Coating of Boundary Lubricated Components-Advantages of Coating One of the Contact Surfaces Rather Than Both or None", Tribology International, 36, pp.843~849 (2003)