수분오염에 따른 그리스 내 증주제 분해 연구
Decomposition of Thickener in Grease by Water Contamination
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Automotive wheel bearing grease helps to reduce stresses and prevent wear of wheel bearings. But it is easily contaminated by water and other contaminants. Previously, our research group reported the change of grease physical properties such as dropping point, work penetration and oxidation work stability, water washout characteristics, leakage tendency, oil separation, evaporation loss and rust protection by water contamination. In this paper, we analyzed the physical characteristics of grease such as lubricity, viscosity and total acid number to investigate the mechanism of thickener decomposition. In water contaminated grease, the total acid number and wear scar were increased, the viscosity was decreased due to the decomposition of lithium complex thickener.
Abstract
Automotive wheel bearing grease helps to reduce stresses and prevent wear of wheel bearings. But it is easily contaminated by water and other contaminants. Previously, our research group reported the change of grease physical properties such as dropping point, work penetration and oxidation work stability, water washout characteristics, leakage tendency, oil separation, evaporation loss and rust protection by water contamination. In this paper, we analyzed the physical characteristics of grease such as lubricity, viscosity and total acid number to investigate the mechanism of thickener decomposition. In water contaminated grease, the total acid number and wear scar were increased, the viscosity was decreased due to the decomposition of lithium complex thickener.
참고문헌 (8)
- 임영관, "수분함량에 따른 자동차용 휠베어링 그리스 품질특성 연구", 한국윤활학회지, 27(5), pp.275~280 (2011), 한국윤활학회
- E. Richard Brooser, "Handbook of lubrication, Theory and practice of tribology, Vol. II, Theory & Design", CRC Press
- 사단법인 일본트라이볼로지학회, "ISO 18436- 4규격에 따른 기계설비의 상태감시와 진단(트라이볼 로지 영역1)"
- "ASM Handbook, Friction, lubrication and wear technology, Vol. 18" (1992), ASM International
- Kim, J. Y., "Anti-wear Performance and Life Evaluation of Wheel Bearing Type Greases", KSTLE 추계학 술대회 논문집, pp.111~116 (2004)
- "Business act for quality standard inspection method and inspection fee for petroleum product, Ministry of Commerce, Industry and Energy, 2010-236", ~ (2010)
- 허영민, "자동차용 휠베어링의 기동토크와 밀봉성을 고려한 립 씰의 형상 설계에 관한 연구", 한국자동차공학회 논문집, 15(4), pp.10~16 (2007), 한국자동차공학회
- Stevens, Malcolm P., "Polymer Chemistry: An Introduction 3rd Ed.", pp.68~70 (1999)