급유홈의 크기와 위치가 원통형 저널 베어링의 정적성능에 미치는 영향
The Effect of Dimensions and Location of Oil Grooves on the Static Performance of a Cylindrical Journal Bearing
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In this study, the effect of dimensions and location of oil grooves on the static performance of a cylindrical journal bearing is analyzed numerically. Axial length, circumferential length and location of oil grooves are considered as parameters. Cavitation occurs within the diverging region of a journal bearing. The distribution of cavitation region where cavitation occurs varies with dimensions and location of oil grooves and affects the performance of a journal bearing. Elrod’s cavitation algorithm which implements JFO boundary conditions based on the principle of mass conservation at the interfaces between cavitation and full film region is adopted in order to consider the effect of cavitation. The result shows that parameters, especially location of oil grooves have a great effect on the static performance of a journal bearing.
Abstract
In this study, the effect of dimensions and location of oil grooves on the static performance of a cylindrical journal bearing is analyzed numerically. Axial length, circumferential length and location of oil grooves are considered as parameters. Cavitation occurs within the diverging region of a journal bearing. The distribution of cavitation region where cavitation occurs varies with dimensions and location of oil grooves and affects the performance of a journal bearing. Elrod’s cavitation algorithm which implements JFO boundary conditions based on the principle of mass conservation at the interfaces between cavitation and full film region is adopted in order to consider the effect of cavitation. The result shows that parameters, especially location of oil grooves have a great effect on the static performance of a journal bearing.
참고문헌 (12)
- Ken, I, "An Analysis of Lubricating Film Journal Bearing-Effect of oil Supply Condition on the Static Performance", JSLE, (4) (1984)
- So, H, "The Cooling Effects of Supply Oil on Journal Bearings for Varying Inlet Conditions", Tribology International, 20, pp.79~89 (1987)
- Zhang, Y, "Dynamic Properties of Flexible Journal Bearings of Infinite Width Considering Oil Supply Condition and Pressure", Wear, 130, pp.53~68 (1989)
- Jeong, K. M, "The Effects of Oil Supply Conditions on the Static Characteristics of Plain Journal Bearings", Journal of the KSTLE, 6(2), pp.76~87 (1990)
- Vijayaraghavan, D, "Effect of Type and Location of Oil Groove on the Performance of Journal Bearings", Tribology Transactions, 35, pp.98~106 (1992)
- Costa, L, "An Analysis of the Influence of Oil Supply Conditions on the Thermohydrodynamic Performance of a Single-Groove Journal Bearing", Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 217, pp.133~144 (2003)
- Wang, J. K, "Effects of Oil Inlet Pressure and Inlet Position of Axially Grooved Infinitely Long Journal Bearings. Part I: Analytical Solutions and Static Performance", Tribology International, 41, pp.119~131 (2008)
- Wang, J. K, "Effects of Oil Inlet Pressure and Inlet Position of Axially Grooved Infinitely Long Journal Bearings. Part II: Nonlinear Instability Analysis", Tribology International, 41, pp.132~140 (2008)
- Floberg, L, "The Finite Journal Bearing Considering Vaporization", Transactions of Chalmers University of Technology, ~ (1957)
- Olsson, K, "Cavitation in Dynamically Loaded Bearings", Transactions of Chalmers University of Technology, ~ (1965)
- Elrod, H. G, "A Computer Program for Cavitation and Starvation Problems", Cavitation and Related Phenomena in Lubrication, Proceedings of the 1st Leeds-Lyon Symposium on Tribolog, pp.37~41 (1974), Leeds Univ.
- Elrod, H. G, "A Cavitation Algorithm", ASME Journal of Lubrication Technology, 103, pp.350~354 (1981)