연료분사펌프의 최적 간극 설계
Optimal Design of Clearance in Fuel Injection Pump
2
조회
0
다운로드
5
인용
0
참고문헌
키워드
초록
In the study, a design process for ensuring optimal clearance in a fuel injection pump(FIP) is suggested. Structure analysis and hydrodynamic lubrication analysis are performed to determine the optimal clearance. The FIP is simulated using Hypermesh, Abaqus 6.12 to evaluate the reduction of clearance when the maximum supply pressure is applied. The reduction in clearance is caused by the difference in the deformations between the barrel and plunger. When the deformation of the plunger is larger than that of the barrel, a reduction in clearance at the head part occurs. On the other hand, the maximum clearance reduction equals the maximum deformation in the stem part, because the deformation of barrel does not occur in this region. The clearance of FIP should be designed to be larger than maximum reduction of clearance in order to avoid contact between the plunger and barrel. In addition, the two-dimensional Reynolds equation is used to evaluate lubrication characteristics with variations of viscosity, clearance and nozzle for a laminar, incompressible, unsteady state flow. The equation is discretized using the finite difference method. The lubrication characteristics of FIP are investigated by comparing film parameter, which is the ratio of the minimum film thickness and surface roughness. The optimal clearance of FIP is to be designed by considering the maximum reduction in clearance, lubrication characteristics, machining limits and tolerance of clearance.
Abstract
In the study, a design process for ensuring optimal clearance in a fuel injection pump(FIP) is suggested. Structure analysis and hydrodynamic lubrication analysis are performed to determine the optimal clearance. The FIP is simulated using Hypermesh, Abaqus 6.12 to evaluate the reduction of clearance when the maximum supply pressure is applied. The reduction in clearance is caused by the difference in the deformations between the barrel and plunger. When the deformation of the plunger is larger than that of the barrel, a reduction in clearance at the head part occurs. On the other hand, the maximum clearance reduction equals the maximum deformation in the stem part, because the deformation of barrel does not occur in this region. The clearance of FIP should be designed to be larger than maximum reduction of clearance in order to avoid contact between the plunger and barrel. In addition, the two-dimensional Reynolds equation is used to evaluate lubrication characteristics with variations of viscosity, clearance and nozzle for a laminar, incompressible, unsteady state flow. The equation is discretized using the finite difference method. The lubrication characteristics of FIP are investigated by comparing film parameter, which is the ratio of the minimum film thickness and surface roughness. The optimal clearance of FIP is to be designed by considering the maximum reduction in clearance, lubrication characteristics, machining limits and tolerance of clearance.
참고문헌 (14)
- Park, T. Y., "A Study on the Design Improvement to Increase Durability of Fuel Injection Nozzle for HiMSEN", Journal of Korean Society of Marine Engineering Autumn Conference, pp.231~232 (2010)
- 양영준, "선박 중형디젤엔진용 연료분사펌프 해석 연구", 한국기계가공학회지, 11(6), pp.123~129 (2012), 한국기계가공학회
- Jeon, H. J., "Marine Diesel Engines and Gas Turbines", pp.728~729 (2012), Dong Myeong Publishers
- Sweeny, D. C., "Preliminary Investigation of Hydraulic Lock", Engineering, 172, pp.203~205 (1951)
- Sasaki, A., "A Review of Studies of Hydraulic Lock", Lubrication Engineering, 49, pp.585~593 (1993)
- Park, T. J., "The Effect of Pressure on Viscosity in Grooved Hydraulic Spool Valves", J. Korean Soc. Tribol. Lubr. Eng, 22(6), pp.307~313 (2006)
- 홍성호, "스풀밸브 해석에서 Navier-Stokes 방정식과 Reynolds 방정식에 의한 비교 연구", 한국윤활학회지, 28(5), pp.218~232 (2012), 한국윤활학회
- 홍성호, "스파이럴 그루브가 가공된 스풀밸브의 윤활 특성 연구", 한국윤활학회지, 28(6), pp.303~314 (2012), 한국윤활학회[DOI]
- 홍성호, "다양한 그루브 단면형상에 대한 스풀밸브의 윤활특성 연구", 한국윤활학회지, 29(3), pp.149~159 (2013), 한국윤활학회[DOI]
- 홍성호, "캐비테이션을 고려한 스풀밸브 해석에서 Navier-Stokes 방정식과 Reynolds 방정식에 의한 비교 연구", 한국윤활학회지, 29(5), pp.275~285 (2013), 한국윤활학회[DOI]
- Lee, B. R., "Numerical Analysis of the plunger Motion in Reciprocating Pump", Proc. Spring Conference of the KSTLE, pp.31~32 (2013)
- Lee, B. R., "Hydrodynamic Lubrication Analysis of Plunger Motion for Reciprocating Pump", Proc. Fall Conference of the KSTLE, pp.255~ (2014)
- Lee, B. R., "The Effect of Partial Groove on Lubrication Property for Plunger Pump", Journal of the Korean Soc. Precis. Eng. Spring Conference, pp.564~ (2014)
- 임동진, "속도의 영향에 따른 3차원 거친 표면의 혼합윤활해석", 한국윤활학회지, 29(1), pp.27~32 (2013), 한국윤활학회[DOI]