연료분사펌프의 윤활 특성 개선: 제2부 - 그루브의 적용
Improvement of the Lubrication Characteristics of Fuel Injection Pump for Medium-Speed Diesel Engines: Part II - Application of Grooves
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study evaluates the effect of grooves on the stem part of a plunger on the lubrication characteristics of a fuel injection pump (FIP) by using hydrodynamic lubrication analysis. The current study uses the two-dimensional Reynolds equation to evaluate the changes in lubrication characteristics with variations in clearance, viscosity, and grooves for a laminar, incompressible, and unsteady state flow. This study investigates the lubrication characteristics by comparing the dimensionless minimum film thickness or the film parameter, which is the ratio of the minimum film thickness to surface roughness. The analysis method for the groove section differs depending on the depth of the groove. For instance, in the case of a shallow groove, the film thickness equation considers the depth of the groove, while in the case of a deep grove, it considers the flow continuity. The lubrication characteristics of the FIP are more sensitive to changes in the groove width than to changes in other design variables. Moreover, the application of a groove is more effective under low viscosity conditions. The smaller the distance from the edge of the stem part to the first groove in the case of shallow grooves, the better are the lubrication characteristics of the FIP. In contrast, in the case of deep grooves, the lubrication characteristics of the FIP improve as the distance increases. The application of shallow grooves is more effective for improving the lubrication characteristics than the application of deep grooves.
Abstract
This study evaluates the effect of grooves on the stem part of a plunger on the lubrication characteristics of a fuel injection pump (FIP) by using hydrodynamic lubrication analysis. The current study uses the two-dimensional Reynolds equation to evaluate the changes in lubrication characteristics with variations in clearance, viscosity, and grooves for a laminar, incompressible, and unsteady state flow. This study investigates the lubrication characteristics by comparing the dimensionless minimum film thickness or the film parameter, which is the ratio of the minimum film thickness to surface roughness. The analysis method for the groove section differs depending on the depth of the groove. For instance, in the case of a shallow groove, the film thickness equation considers the depth of the groove, while in the case of a deep grove, it considers the flow continuity. The lubrication characteristics of the FIP are more sensitive to changes in the groove width than to changes in other design variables. Moreover, the application of a groove is more effective under low viscosity conditions. The smaller the distance from the edge of the stem part to the first groove in the case of shallow grooves, the better are the lubrication characteristics of the FIP. In contrast, in the case of deep grooves, the lubrication characteristics of the FIP improve as the distance increases. The application of shallow grooves is more effective for improving the lubrication characteristics than the application of deep grooves.
참고문헌 (22)
- 홍성호, "Improvement of Lubrication Characteristics in Fuel Injection Pump for Medium-Speed Diesel Engines: Part I - Application of Profile Shape", 한국윤활학회지, 31(5), pp.205~212 (2015), 한국윤활학회[DOI]
- Park, T. Y., "A Study on the Design Improvement to Increase Durability of Fuel Injection Nozzle for HiMSEN", Journal of Korean Society of Marine Engineering Autumn Conference, pp.231~232 (2010)
- 양영준, "선박 중형디젤엔진용 연료분사펌프 해석 연구", 한국기계가공학회지, 11(6), pp.123~129 (2012), 한국기계가공학회
- 홍성호, "연료분사펌프의 최적 간극 설계", 한국윤활학회지, 31(4), pp.148~156 (2015), 한국윤활학회[DOI]
- Jeon, H. J., "Marine Diesel Engines and Gas Turbines", pp.728~729 (2012), Dong Myeong Publishers
- Lee, B. R., "Hydrodynamic Lubrication Analysis of Plunger Motion for Reciprocating Pump", Proc. Autumn Conference of the KSTLE, pp.255~ (2014)
- Lee, B. R., "Numerical Analysis of the Plunger Motion in Reciprocating Pump", Proc. Spring Conference of the KSTLE, pp.31~32 (2013)
- Lee, B. R., "The Effect of Partial Groove on Lubrication Property for Plunger Pump", Journal of the Korean Soc. Precis. Eng., Spring Conference, pp.564~ (2014)
- Bi, C., "Heat Transfer Enhancement in Mini-Channel Heat Sinks with Dimples and Cylindrical Grooves", Applied Thermal Engineering, 55, pp.121~132 (2013)
- Adatepe, H., "An Experimental Investigation of Frictional Behavior of Statically Loaded Micro-Grooved Journal Bearing", Tribology International, 44, pp.1942~1948 (2011)
- Adatepe, H., "An Investigation of Tribological Behaviors of Dynamically Loaded Non-Grooved and Micro-Grooved Journal Bearings", Tribology International, 58, pp.12~19 (2013)
- 강지훈, "스파이럴 그루브 스러스트 베어링의 부하용량 향상을 위한 설계 변수에 대한 연구", 한국윤활학회지, 18(3), pp.181~186 (2002), 한국윤활학회
- 박상신, "헤링본 그루브 공기 스러스트 베어링의 해석", 한국윤활학회지, 27(5), pp.233~239 (2011), 한국윤활학회
- Cho, M. R., "An Analytical Study on the Lubrication Characteristics between the Piston Ring and Grooved Cylinder Liner", J. Korean Soc. Tribol. Lubr. Eng, 16(2), pp.114~120 (2000)
- Lee, A. S., "Lubrication Performance Analysis of a Spiral Groove Dry Gas Seal for a High-Speed Flying Object", J. Korean Soc. Tribol. Lubr. Eng, 21(1), pp.8~15 (2005)
- Ali, F., "Experimental and Numerical Investigation on the Behavior of Transverse Limited Micro-Grooves in EHL Point Contacts", Tribology International, 84, pp.81~89 (2015)
- Janakiraman, S., "Observation on the Effects of Grooved Surfaces on the Interfacial Torque in Highly Loaded Rolling and Sliding Tests", Tribology International, 81, pp.179~189 (2015)
- 홍성호, "스파이럴 그루브가 가공된 스풀밸브의 윤활 특성 연구", 한국윤활학회지, 28(6), pp.303~314 (2012), 한국윤활학회[DOI]
- 홍성호, "다양한 그루브 단면형상에 대한 스풀밸브의 윤활특성 연구", 한국윤활학회지, 29(3), pp.149~159 (2013), 한국윤활학회[DOI]
- Kumar, S., "The Effect of Piston Grooves Performance in an Axial Piston Pump", International Journal of Mechanical Sciences, 66, pp.168~179 (2013)
- Jeon, W. J., "The Influence of Groove Location on the Lubrication Characteristic of a Piston", Proc. Spring Conference of the KSTLE, pp.61~62 (2013)
- Merritt, H. E., "Hydraulic Control Systems", pp.108~111 (1967), John Wiley & Sons, Inc.