멜트블로운 부직포의 흡유도와 흡유거동에 관한 연구
A Study on Oil Absorption Rate and Oil Absorbency of Melt-blown Nonwoven
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Abstract― Oil-absorbable nonwovens were produced by meltblown processing of polypropylene chips. In this study, experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. Oil absorbency was decreased, as oil absorbable nonwovens of packing density and gearpump speed were increased. Oil absorption rate was increased,as packing density was increased. Also the oil absorption rate increased with increasing gear-pump speed.
Abstract
Abstract― Oil-absorbable nonwovens were produced by meltblown processing of polypropylene chips. In this study, experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. Oil absorbency was decreased, as oil absorbable nonwovens of packing density and gearpump speed were increased. Oil absorption rate was increased,as packing density was increased. Also the oil absorption rate increased with increasing gear-pump speed.
참고문헌 (14)
- J. Whitfield, "How to Clean a Beach", Nature, 422, pp.464~466 (2003)
- Hiroshi Moriwaki, "Utilization of Silkworm Cocoon Waste as a Sorbent for the Removal of Oil from Water", Journal of Hazardous Materials, 165, pp.266~270 (2009)
- Teik-Thye Lim, "Evaluation of Kapok as a Natural Hollow Hydrophobicoleophilic Fibrous Sorbent for Oil Spill Cleanup", Chemosphere, 66, pp.955~963 (2007)
- B. Wu, "Recycling of Waste Tyre Rubber into Oil Absorbent", Wast Management, 1~5 (2008)
- Lin Hailan, "Preparation and Properties of NR Oil Absorption Composite", Rubber Industry(China), 7, pp.403~407 (2007)
- T. Shimizu, "Effect of Cell Structure on Oil Absorption of Highly Oil Absorptive Polyurethane Foam for On-Site Use", Journal of Applied Polymer Science, 65, pp.179~186 (1997)
- "Korean Industrial Standard", K1600, 2005~ (2005)
- J. H. Song, "Quality Control", pp.317~354 (1998), Young Sul Publisher
- Ishikawa, "Method of Experimental Design", Japan, 153~155 (1972)
- B. Majumdar, "Air Drag in Filaments in the Melt Blowing Process", J. Rheol, 34, pp.591~ (1990)
- Y. M. Kim, "Effect of Meltblown Processing Conditions on the Physical Properties of Polypropylene Fiber Web Fabrics", J. Korean Fiber Society, 33(2), pp.107~115 (1996)
- H. Shim, "Effect of Processing Factors on the Physical Properties of Meltblown Polypropylene Fiber Web Fabrics (Ⅱ)", J. Korean Fiber Society,, 33(6), pp.492~498 (1996)
- 신현세, "멜트블로운 부직포 제조공정이 유흡착포의 특성에 미치는 영향", 한국염색가공학회지, 21(6), pp.22~28 (2009), 한국염색가공학회
- Miller, R.V, "Strategies and Mechanisms for Field Research in Environmental Bioremediation", The American Academy of Microbiology, 1~20 (1996)