멜트블로운 부직포 제조공정이 유흡착포의 특성에 미치는 영향
Effect of Manufacturing Conditions on the Properties of Oil-absorbable Melt Blown Nonwoven
2
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
Oil-absorbable nonwovens were produced by melt-blown processing of polypropylene chips. The melt-blown processing conditions, such as air pressure, and gear pump speed, DCD. In this study, these three factors were chosen to produce samples. Experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. The effect of the factors on oil absorption properties of melt-blown nonwoven fabric such as oil absorbency were evaluated. As a result, the fiber diameter decreased as gearpump speed decreased or air pressure increased. The oil absorbency increased as air pressure increased or gearpump speed decreased and with the DCD increasing the oil absorbency significantly increased.
Abstract
Oil-absorbable nonwovens were produced by melt-blown processing of polypropylene chips. The melt-blown processing conditions, such as air pressure, and gear pump speed, DCD. In this study, these three factors were chosen to produce samples. Experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. The effect of the factors on oil absorption properties of melt-blown nonwoven fabric such as oil absorbency were evaluated. As a result, the fiber diameter decreased as gearpump speed decreased or air pressure increased. The oil absorbency increased as air pressure increased or gearpump speed decreased and with the DCD increasing the oil absorbency significantly increased.
참고문헌 (10)
- B. Wu, "Recycling of waste tyre rubber into oil absorbent", pp.1~5 (2008), Wast Management
- Lin Hailan, "Preparation and Properties of NR Oil Absorption Composite", Rubber Industry(China), 7, pp.403~407 (2007)
- T. Shimizu, "Effect of Cell Structure on Oil Absorption of Highly Oil Absorptive Polyurethane Foam for On-Site Use", Journal of Applied Polymer Science, 65, pp.179~186 (1997)
- C. H. Joo, "Structure and Technology Trend of Meltblown Nonwoven", Journal of the Korean Fiber Society, 28(12), pp.8~16 (1991)
- "Korean Industrial Standard, K1600:2005", ~ (2005)
- J.H.Song, "Quality Control", pp.317~354 (1998), Young-Seol Publisher
- Ishikawa, "“Method of Experimental Design”, Japan", 153~155 (1972)
- B. Majumdar, "Air Drag on Filaments in the Melt Blowing Process", Journal of Rheology, 34, pp.591~ (1990)
- Young Min kim, "Effect of Meltblown Processing Conditions on the Physical Properties of Polypropylene Fiber Web Fabrics", of the Korean Fiber Society, 33(2), pp.107~115 (1996)
- Hyunjoo Shim, "Effect of Processing Factors on the Physical Properties of Meltblown Polypropylene Fiber Web Fabrics (Ⅱ)", Journal of the Korean Fiber Society, 33(6), pp.492~498 (1996)