충격에 의해 손상된 섬유강화 열가소성 수지 복합재료의 재활용 횟수에 따른 물성의 변화
The Influence of Mechanical Properties with the Number of Recycling of Fiber-reinforced Thermoplastic Composites Damaged by Impact
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
본 연구에서는 충격에 의해 파손된 열가소성 유리 섬유 강화 복합재료의 재성형을 통한 물성변화를 조사하였다. 복합재료 시편은 유리섬유 부직포와 폴리프로필렌 필름을 이용하여 핫 프레스 압축 성형 공정을 통해 제작하였다. 그리고 총 3번의 낙하 충격 테스트를 진행하였으며, 시편의 물성을 확인하기 위하여 인장시험, 굴곡시험, 낙하충격시험, 시차주사열량계, 주사전자현미경 등의 다양한 측정을 진행하였다. 그 결과, 재활용 단계가 반복될수록 결정화도, 인장강도, 탄성계수, 굴곡강도는 증가하였으나 충격특성은 크게 감소하였다.
Abstract
In this study, the effect of mechanical and chemical properties of glass fiber reinforced thermoplastic (GFRTPs) according to the number of recycling was confirmed. The composite materials were manufactured through a hot press compression molding process using a glass fiber nonwoven fabric and a polypropylene film. Four specimens were named according to the number of recycled test repeat: First manufacture, 1st Recycle, 2nd Recycle, and 3rd Recycle. To investigate the mechanical properties of the prepared specimen, tensile test, flexural test, drop-weight impact test, differential scanning calorimetry (DSC), and field emission electron gun-scanning electron microscope (FE-SEM) was performed. As a result, as the number of recycling steps repeat, the degree of crystallization, tensile strength, elastic modulus, and flexural strength were increased, but the impact properties were greatly reduced.
참고문헌 (9)
- The European Union, "Regulation (EC) No 715", 2007 of the European Parliament and of the Council, 2007, 1~16
- Adam, H., "Carbon Fibre in Automotive Applications", Materials & Design, 18(4-6), pp.349~355 (1997)
- Robert, M. J., "Mechanics of Composite Materials" (2015), A Taylor &Francis, Inc.
- 김기석, "자동차 경량화를 위한 탄소섬유강화 복합재료의 동향", 엘라스토머 및 콤포지트, 47(1), pp.65~74 (2012), 한국고무학회
- Liu, Y., "Recycling of Carbon", Epoxy Composites, 2004, pp.94(5), 1912~1916
- Pickering, S. J., "Recycling of Composites : A Review", Composites Part A, 37(8), pp.1206~1215 (2006)
- Yang, Y., "Recycling of Composite Materials", Chemical Engineering and Processing, 51, pp.53~68 (2012)
- 박동철, "열가소성 방향족 폴리머의 결정화 특성에 대한 연구", Composites Research, 31(2), pp.63~68 (2018), 한국복합재료학회
- Aurrekoetxea, J., "Effects of Recycling on the Microstructure and the Mechanical Properties of Isotactic Polypropylene", Journal of Materials Science, 36, pp.2607~2613 (2001)