랜덤상태의 E유리 단섬유 강화 불포화 폴리에스터 기반 수지복합재료의 물성 - E유리 단섬유의 길이와 함량 및 적층수의 영향 -
Properties of Randomly Oriented Chopped E-glass Reinforced Unsaturated Polyester Based Resin Composite -Effect of Length/Content of E-Glass Fiber and Number of Stacking-
0
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
To develop automobile parts, the unsaturated polyester based matrix resin(PR)/reinforcement(randomly oriented chopped E-glass fiber, GF) composites were prepared using sheet molding compound(SMC) compression molding. The effects of GF length(0.5, 1.0 1.5 and 2.0inch)/content (15, 20, 25, 30wt%) and number of ply(3, 4 and 5) on the specific gravity and mechanical properties of PR/GF composites were investigated in this study. The optimum length of GF was found to be about 1.0inch for achieving improved mechanical properties(tensile strength and initial modulus). The tensile strength and initial modulus of composites increased with increasing GF content up to 30wt%, which is favorable content range for SMC. The specific gravity, tensile strength/initial modulus, compressive strength/modulus, flexural strength/modulus and shear strength increased with increasing the number of ply up to 5, which is the maximum number of ply range for SMC. The effectiveness of ply number increased in the flexural strength > shear strength > compressive strength > tensile strength.
Abstract
To develop automobile parts, the unsaturated polyester based matrix resin(PR)/reinforcement(randomly oriented chopped E-glass fiber, GF) composites were prepared using sheet molding compound(SMC) compression molding. The effects of GF length(0.5, 1.0 1.5 and 2.0inch)/content (15, 20, 25, 30wt%) and number of ply(3, 4 and 5) on the specific gravity and mechanical properties of PR/GF composites were investigated in this study. The optimum length of GF was found to be about 1.0inch for achieving improved mechanical properties(tensile strength and initial modulus). The tensile strength and initial modulus of composites increased with increasing GF content up to 30wt%, which is favorable content range for SMC. The specific gravity, tensile strength/initial modulus, compressive strength/modulus, flexural strength/modulus and shear strength increased with increasing the number of ply up to 5, which is the maximum number of ply range for SMC. The effectiveness of ply number increased in the flexural strength > shear strength > compressive strength > tensile strength.
참고문헌 (22)
- 고성위, "섬유함유율에 따른 GF", PP 복합재료의 인장파괴거동, 2004, pp.40(2), 161~165[DOI]
- O. Kalny, "Performance Evaluation of Repair Technique for Damaged Fiber-reinforced Polymer Honeycomb Bridge Deck Panels", J. Bridge Eng, 9, pp.75~ (2004)
- 강민성, "평직 CFRP 적층복합재료의 섬유배열각도에 따른 파괴강도 예측", 대한기계학회논문집 A, 36(8), pp.881~887 (2012), 대한기계학회[DOI]
- W. H. Han, "High-Tech Materials", pp.110~147 (2012), Korea Polytechnics
- B. S. Kim, "Processing of Fiber Reinforced Composite Materials", Polymer Science and Technology, 10(1), pp.20~ (1999)
- E. J. Jun, "Processing Technology of Composite Materials", The Korean Society of Mechanical Engineers, 32(11), pp.18~ (1992)
- 서대경, "에폭시 수지 적용 아라미드 및 탄소섬유 복합재료의 물성연구", 한국염색가공학회지, 27(1), pp.11~17 (2015), 한국염색가공학회
- S. H. Hwang, "Curing Behaviors and Mechanical Properties of Styrene", Unsaturated Polyester System for Sheet Molding Compound, 1995, pp.19(2), 170~
- 배기붕, "저수축제 폴리스틸렌과 불포화 폴리에스터 수지를 사용한 Sheet Molding Compound 제조 및 특성", Korean Chemical Engineering Research(HWAHAK KONGHAK), 50(3), pp.588~593 (2012), 한국화학공학회[DOI]
- H. C. Chung, "A Study on Preparation and Properties of Vinyl Ester Resin Adapted Hybrid SMC", M.S., pp.2010
- P. Vivek, "Opportunity for Composite Materials in India: Sheet Molding Compound(SMC) Industry", Polymer, Chemicals, pp.Life Sciences Market, 2010[DOI]
- W. Li, "Shrinkage Control of Low-profile Unsaturated Polyester Resins Cured at Low Temperature", Polym. J, 39, pp.5677~ (1988)
- J. C. Lucas, "Cure of Unsaturated Polyester Resins 2, Influence of Low-profile Additives and Fillers on the Polymerization Reaction, Mechanical Properties and Surface Rugosities", Polym. J, 34, pp.1886~ (1993)
- W. Li, "Low Temperature Cure of Unsaturated Polyester Resins with Thermoplastic Additive III, Modification of Polyvinyl Acetate for Better Shrinkage Control", Polym. J, 41, pp.711~ (2000)
- E. Melby, "In Comprehensive Polymer Science" (1989), Pergamon Press
- S. U. Khan, "Fatigue Damage Behaviors of Carbon Fiber-reinforced Epoxy Composites Containing Nanoclay", Compos. Sci. Technol, 70, pp.2077~ (2010)
- R. H. Dauskardt, "Fatigue of Advance Materials", Adv. Mater. Process, 7, pp.26~ (1993)
- W. Zhang, "The Effect of Carbon Nanotube Dimensions and Dispersion on The Fatigue Behavior of Epoxy Nanocomposites", Nanotechnology, 19, pp.285709~ (2008)
- M. H. A. Maamori, "Mechanical Properties for Unsaturated Polyester Reinforcement by Glass Fiber using Ultrasonic Technique", Int. J. of Multidisciplinary and Current Research, 1, pp.1~ (2013)
- N. J. Lee, "The Effect of Fibre Content on The Mechanical Properties of Glass Fibre Mat", Polypropylene Composites, 1999, pp.30, 815~
- S. Boylan, "Effect of Reinforcement Type and Length on Physical Properties, Surface Quality and Cycle Time for Sheet Molding Compound(SMC) Compression Molded Parts", J. Appl. Polym. Sci, 90, pp.2557~ (2003)
- J. H. Lee, "Effects of The Glass Fiber Characteristics on The Mechanical Properties of Thermoplastic Composite", The Korean Society of Mechanical Engineers, 24(7), pp.1697~ (2000)