깊이 측정이 가능한 마이크로 압입 시험기 개발 및 성능평가
Development and its Performance Evaluation of a Depth-Sensing Micro-Indentation Testing Device
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
We developed a compact micro indentation testing device (designated SNUT) which is capable to measure Young’s modulus of a sample using depth and applied load data during indentation. Performance of this device was evaluated using pure Ti, pure Ni, and die steel (SKD11). As a result of analysing the indentation test data, the frame compliance Cf was found to influence mainly the modulus by 80% among several factors affecting accuracy of Young’s modulus. Project area, which was determined by indirect indentation method, was modified using direct SEM observation. Finally, Young’s modulus error was reduced to 5% after taking into consideration the frame compliance and modified projected area from 80% error without any these two correction factors. The performance of SNUT and MTS instruments was compared using same specimen (pure Ti).
Abstract
We developed a compact micro indentation testing device (designated SNUT) which is capable to measure Young’s modulus of a sample using depth and applied load data during indentation. Performance of this device was evaluated using pure Ti, pure Ni, and die steel (SKD11). As a result of analysing the indentation test data, the frame compliance Cf was found to influence mainly the modulus by 80% among several factors affecting accuracy of Young’s modulus. Project area, which was determined by indirect indentation method, was modified using direct SEM observation. Finally, Young’s modulus error was reduced to 5% after taking into consideration the frame compliance and modified projected area from 80% error without any these two correction factors. The performance of SNUT and MTS instruments was compared using same specimen (pure Ti).
참고문헌 (11)
- Oliver, W.C, , J. Master. Res, 7, pp.1564~1583 (1992)
- 이윤희, "계장화 압입곡선의 천이거동 모델링을 통한 비등방향 2축 표면 잔류응력 분석", 대한금속·재료학회지, 41(11), pp.2~742 (2003), 대한금속·재료학회
- Huber, N, "Determination of Constitutive Properties from Spherical Indentation Data using Neural Networks Part I: the Case of Pure Kinematic Hardening in Plasticity Laws", J. Mech. Phys. Solids, 47, pp.1569~1588 (1999)
- Jayaraman, S, "Determination of Monotonic Stress-strain Curve of Hard Materials from Ultra-lowload- indentation Tests", Int. J. Solid Struct, 35, pp.365~381 (1998)
- Cao Y.P, "A New Method to Extract the Plastic Properties of Metal Materials from an Instrumented Spherical Indentation Loading Curve", J. Acta Materialia, 52, pp.4023~4032 (2004)
- Augulis L, "Electronic Speckle Pattern Interferometry Formechanical Testing of thin Films", Optics and Lasers in Engineering, 42, pp.1~8 (2004)
- Bamberg E, "A Tensile Test Device for in Situ Atomic Force Microscope Mechanical Testing", Precision Eng., 30, pp.71~84 (2006)
- 양경탁, "마이크로 압입 크리프 시험기 개발 및 성능평가", 한국윤활학회지, 24(1), pp.27~33 (2008), 한국윤활학회
- "ISO 14577 - 1 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : Test method", ~
- Fischer-Cripps A.C, "Nanoindentation", pp.69~93 (2004), Springer
- Stauss S, "Determining the Stress-strain Behaviour of Small Devices by Nanoindentation in Combination with Inverse Methods", Microelectronic Engineering, 67, pp.818~825 (2003)