산소 저온 플라즈마 처리에 의한 실리콘코팅 막 구조원단의 접착특성
Properties of Silicone-coated Fabric for Membrane Treated by Oxygen Low Temperature Plasma
2
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Silicone-coated fabric were treated by oxygen low temperature plasma to improve the adhesion. The surface of silicone-coated fabric was modified with gaseous plasma of several discharge power in the presence of oxygen gas at 1Torr pressure. Oxygen plasma treatment introduces oxygen-containing functional groups and micro-pittings on the silicone-coated fabric surface. The treated fabrics with oxygen low temperature plasma were measured by contact angle analyzer and XPS(X-ray photoelectron spectroscopy), and interfacial adhesion was measured by T-peel test. The surface of fabric was investigated by SEM photographs. The chemical and physical modification of the surface wettabillity by plasma treatment can increase the adhesion.
Abstract
Silicone-coated fabric were treated by oxygen low temperature plasma to improve the adhesion. The surface of silicone-coated fabric was modified with gaseous plasma of several discharge power in the presence of oxygen gas at 1Torr pressure. Oxygen plasma treatment introduces oxygen-containing functional groups and micro-pittings on the silicone-coated fabric surface. The treated fabrics with oxygen low temperature plasma were measured by contact angle analyzer and XPS(X-ray photoelectron spectroscopy), and interfacial adhesion was measured by T-peel test. The surface of fabric was investigated by SEM photographs. The chemical and physical modification of the surface wettabillity by plasma treatment can increase the adhesion.
참고문헌 (11)
- M. R. Werthimer, "Plasma Processing of Polymers", pp.14~435 (1997), Department of Chemistry
- C. W. Joo, "A Study on the Effect of Corona-Discharge Treatment on Thermally Bonded Fabrics", J. Korean Fiber Soc, 28, pp.31~ (1991)
- 박영미, "산소 저온 플라즈마 처리에 의한 PVA 편광필름의 기능성 개선", 한국염색가공학회지, 16(3), pp.14~21 (2004), 한국염색가공학회
- 구강, "아르곤 저온 플라즈마 처리에 의한 CTA 필름의 접착성 연구", 한국염색가공학회지, 16(5), pp.28~34 (2004), 한국염색가공학회
- 황윤중, "상압 산소 플라즈마 처리에 의한 PTT 및 PET의 표면 개질", 한국섬유공학회지, 41(3), pp.210~216 (2004), 한국섬유공학회
- K. W. Lee, "Metallization of Polymer", pp.79~ (1990), American Chemical Society
- K. Koo, "Characteristics of Sputter-Etched Poly(ethylene terephthalate) and Nylon 6 Fillms", The Society of Fiber Science and Technology, 48(1), pp.15~20 (1992)
- Y. A. Kwon, "Wettabliity and Water Repellency of Polyester Fabrics Treated by Low Temperature Plasma", J. Korean Society Clothing and Textiles, 19(2), pp.320~ (1995)
- R. H. Hansen, "Effect of Atomic Oxygen on Polymers", J. Polymer Science, 3, pp.2205~2214 (2003)
- 이태상, "아라미드 섬유의 플라즈마 처리에 따른 클로로프렌 고무와의 계면접착 특성", 한국섬유공학회지, 47(3), pp.205~211 (2010), 한국섬유공학회