프로파일링한 테이퍼 로울러의 탄성유체윤활 해석
An Elastohydrodynamic Lubrication Analysis of Tapered Roller with Profiled Ends
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Tapered roller bearings are widely used in high axial-load and radial-load applications. In this study, a numerical analysis is performed to study a finite line contacts EHL problem between a tapered roller and raceway in tapered roller bearings. Converged solutions are obtained for moderate load and material parameters using a finite difference method with non-uniform grids and the Newton-Raphson method. The contours and sectional plots of pressure distribution and film shape are compared. The pressure distribution and film shapes near both ends of the roller are very different from those in the central part and are transversely asymmetric. The maximum pressure and absolute minimum film thickness always occur at the small end of the roller.
Abstract
Tapered roller bearings are widely used in high axial-load and radial-load applications. In this study, a numerical analysis is performed to study a finite line contacts EHL problem between a tapered roller and raceway in tapered roller bearings. Converged solutions are obtained for moderate load and material parameters using a finite difference method with non-uniform grids and the Newton-Raphson method. The contours and sectional plots of pressure distribution and film shape are compared. The pressure distribution and film shapes near both ends of the roller are very different from those in the central part and are transversely asymmetric. The maximum pressure and absolute minimum film thickness always occur at the small end of the roller.
참고문헌 (18)
- Heydari, M., "The Influence of Axial Profile on Pressure Distribution in Radially Loaded Rollers", J. of Mech. Eng. Sci., 21, pp.38~388 (1979)
- Dowson, D., "A Numerical Solution to the Elastohydrodynamic Problem", J. of Mech. Eng. Sci, 1, pp.7~15 (1959)
- Hamrock, B. J., "Isothermal Elastohydrodynamic Lubrication of Point Contacts, Part 3 : Fully Flooded Results", J. of Lub. Tech, 99, pp.264~276 (1977)
- Chen, X., "Review and Prospect of Developments in EHL of Finite Line Contacts", Proc. of IUTAM Sympo. on Elastohydrodynamics and Micro-elastohydro- dynamics, pp.95~106 (2004)
- Wymer, D. G., "Elastohydrodynamic Lubrication of a Line Contact", Proc. IMechE, 188, pp.221~231 (1974)
- Mostofi, A., "Elastohydrodynamic Lubrication of Finite Line Contacts", J. of Lub. Tech., 105, pp.598~604 (1983)
- 박태조, "유한한 선접촉 탄성유체윤활문제의수치해석", 대한기계학회논문집, 11(4), pp.579~585 (1987)
- 박태조, "프로파일링을 한 원통형 로울러의탄성유체윤활(I)", 대한기계학회논문집, 12(2), pp.262~270 (1988)
- 박태조, "프로파일링을 한 원통형 로울러의탄성유체윤활(II)", 대한기계학회논문집, 15(6), pp.1975~1981 (1991)
- Park, T. J., "Elastohydro-dynamic Lubrication of a Finite Line Contacts", Wear, 223(1-2), pp.102~109 (1998)
- Park, T. J., "Effect of Roller Axial Profile on the EHL of Finite Cylindrical Roller", Proc. of ECOTRIB 2009 (2009)
- Park, T. J., "Effect of Roller Profile and Misalignment in EHL of Finite Line Contacts", Proc. of ESDA2010 (2010)
- Kushwaha, M., "Aligned and Misaligned Contacts of Rollers to Races in Elastohydrodynamic Finite Line Conjunctions", Proc. IMechE, J. of Mech. Eng. Sci., 216, pp.1051~1069 (2002)
- 박태조, "Misalignment가 있는 유한한 선접촉 EHL 문제의 수치해석", 한국윤활학회지, 26(5), pp.263~271 (2010), 한국윤활학회
- Yamashita, R., "An Analysis of Elastohydrodynamic Film Thickness in Tapered Roller Bearings", Tribology Series, 32, pp.617~637 (1997)
- Yang, P., "Analysis on the Thermal Elastohydrodynamic Lubrication of Tapered Rollers in Opposite Orientation", Tribology Int., 40, pp.1627~1637 (2007)
- Rahnejat, H., "Design of Profiled Taper Roller Bearings", Tribology Int., 12, pp.269~275 (1979)
- 김경웅, "A Numerical Analysis of the Elastohydrodynamic Lubrication of Elliptical Contacts", WEAR, 136(2), pp.299~312, Elsevier Science Sa