구름/스핀 운동을 하는 경우의 타원접촉 EHL 유막두께
Elastohydrodynamic Film Thickness in Elliptical Contacts with Rolling and Spinning
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
In highly stressed machine elements such as angular contact ball bearings and toroidal type traction drives, the elastohydrodynamic lubrication of elliptical contacts with both rolling and spinning motion are occur. In this paper, a finite difference method with non-uniform grid systems and the Newton-Raphson method are applied to solve the problems. Pressure distributions, film contours and variations of the minimum and central film thicknesses are compared with various ellipticity parameter, dimensionless speed and load parameter. The results showed that the spinning motion has significant influence especially on the film shapes. Reduction of the minimum film thickness under spinning is remarkable whereas the central film thickness is relatively less. Especially variations of the minimum film thicknesses with rolling velocity, load and ellipticity ratio are a great different from those of pure rolling. Therefore present numerical scheme can be used in the analysis of general elliptical contact EHL problems and further studies are required.
Abstract
In highly stressed machine elements such as angular contact ball bearings and toroidal type traction drives, the elastohydrodynamic lubrication of elliptical contacts with both rolling and spinning motion are occur. In this paper, a finite difference method with non-uniform grid systems and the Newton-Raphson method are applied to solve the problems. Pressure distributions, film contours and variations of the minimum and central film thicknesses are compared with various ellipticity parameter, dimensionless speed and load parameter. The results showed that the spinning motion has significant influence especially on the film shapes. Reduction of the minimum film thickness under spinning is remarkable whereas the central film thickness is relatively less. Especially variations of the minimum film thicknesses with rolling velocity, load and ellipticity ratio are a great different from those of pure rolling. Therefore present numerical scheme can be used in the analysis of general elliptical contact EHL problems and further studies are required.
참고문헌 (15)
- Dowson,D., "Elastohydrodynamic Lubrication" (1977), Pergamon Press
- Hamrock,B.J., "Isothermal Elastohydro-dynamic Lubrication of Point Contacts,Part 3:Fully Flooded Results", Trans.ASMEJ.of Lub.Tech, 99, pp.264~276 (1977)
- Chittenden,R.J., "Elastohydrodynamic Film Thickness in Concentrated Contacts", Proc.Instn.Mech.Engrs.,J.of Mech.Eng.Sci., pp.207~226 (1986)
- Skurka,J.C, "Elastohydrodynamic Lubrication of Roller Bearings", Trans.ASMEJ.of Lub.Tech, 92, pp.281~291 (1970)
- Ehret, P., "Traction in EHL Elliptical Contacts with Spin Conditions", Tribology Series, pp.71~83 (2000)
- Mostofi,A., "Oil Film Thickness and Pressure Distribution in Elastohydrodynamic Point Contacts", J.of Mech.Eng.Sci, 24, pp.173~182 (1982)
- Dowson,D., "Elastohydrodynamic Lubrication of Elliptical Contacts with Spin and Rolling", Proc.Instn.Mech.Engrs.,J.of Mech.Eng.Sci., pp.165~174 (1991)
- Zou,Q., "Elastohydrodynamic Film Thickness in Elliptical Contacts with Spinning and Rolling", Trans.ASMEJ.of Tribology, 121, pp.686~692 (1999)
- 박태조, "타원접촉의 탄성유체윤활:제2보-스핀운 동의 영향", 한국윤활학회지, 23(2), pp.49~55 (2007)
- 박태조, "스핀운동이 타원접촉의 탄성유체윤 활에 미치는 영향", 한국정밀공학회 2007년도 춘계 학술대회논문집 (2007), 한국정밀공학회 2007년도 춘계 학술대회논문집
- Taniguchi, M., "The Effect of Spin Motion upon Elastohydrodynamic Elliptical Contacts", Elastohydrodynamics, 32, pp.599~610 (1997)
- 장시열, "무단 변속기의 동력전달 접촉에서 회전운동을 고려한 타원형상의 점접촉 탄성유체윤활연구", 한국윤활학회지, 21(6), pp.272~277 (2005), 한국윤활학회
- Park,T.J., "A Numerical Analysis of the Elastohydrodynamic Lubrication of Elliptical Contacts", Wear, 136, pp.299~312 (1990)
- 박태조, "Hamrock & Dowson의 EHL 유막두께식 에 대한 평가", 한국윤활학회지, 12(3), pp.115~122 (1996)
- 박태조, "타원접촉의 탄성유체윤활:제1보-윤활유의 유입방향이 Hertz 접촉타원의 장축방향인 경우", 한국윤활학회지, 14(4), pp.58~63 (1998)