고밀도 폴리에틸렌 플렉시 필라멘트로 제조된 습식부직포의 에어 필터 여재 특성 연구
Air-Filter Media Characteristics of Wet-laid Nonwoven based on HDPE Plexi-filament
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
Air filters are being used in countless places from industrial sites to everyday life. The spread of the COVID-19 virus, which started in 2019, is disrupting people`s daily lives, and the importance of air filters as a basic means to prevent the spread of these diseases is further highlighted. In this study, the purpose was to develop another type of air filter media with excellent barrier properties that can replace PP meltblown nonwoven fabrics widely used commercially due to its excellent electrostatic properties, differential pressure and filtration efficiency. Therefore, wet-laid nonwoven for air filters were manufactured using plexi-filaments formed through flash spinning and having various fiber diameter from hundreds of nanometers to tens of micrometers, and its applicability as an air-filter media was investigated compared to the meltblown nonwoven. As a result of the performance evaluation, it was found that the filtration efficiency and barrier performance at 0.3㎛ was superior to that of the meltblown nonwoven of the same weight, although the differential pressure was high due to morphological properties of the plexi-filament.
Abstract
Air filters are being used in countless places from industrial sites to everyday life. The spread of the COVID-19 virus, which started in 2019, is disrupting people`s daily lives, and the importance of air filters as a basic means to prevent the spread of these diseases is further highlighted. In this study, the purpose was to develop another type of air filter media with excellent barrier properties that can replace PP meltblown nonwoven fabrics widely used commercially due to its excellent electrostatic properties, differential pressure and filtration efficiency. Therefore, wet-laid nonwoven for air filters were manufactured using plexi-filaments formed through flash spinning and having various fiber diameter from hundreds of nanometers to tens of micrometers, and its applicability as an air-filter media was investigated compared to the meltblown nonwoven. As a result of the performance evaluation, it was found that the filtration efficiency and barrier performance at 0.3㎛ was superior to that of the meltblown nonwoven of the same weight, although the differential pressure was high due to morphological properties of the plexi-filament.
참고문헌 (15)
- C. Liu, "Transparent Air Filter for High-Efficiency PM2.5 Capture", Nature Communications, 6, pp.6205~ (2015)
- V. K. Vijayan, "Enhancing indoor air quality –The air filter advantage", Lung India, 32(5), pp.473~ (2015)
- L. Edelman, "Air filtration : Air filter media-an industry evolves", Filtration & Separation, 45(9), pp.24~ (2008)
- 이재달, "고성능 멜트블로운 부직포 복합필터 개발", 한국염색가공학회지, 17(2), pp.40~45 (2005), 한국염색가공학회
- X. Zhang, "Multi-Layered, Corona Charged Melt Blown Nonwovens as High Performance PM0.3 Air Filters", Polymers, 13(4), pp.485~ (2021)
- 홍영기, "코로나 방전에 의한 방진", 의료용 마스크 여과재의 기능화 가공, 2013, pp.25(3), 232~239[DOI]
- 이윤응, "초극세형 폴리프로필렌부직포의 플라즈마를 이용한 표면개질", 한국염색가공학회지, 18(1), pp.20~27 (2006), 한국염색가공학회
- 송인희, "멜트블로운 부직포의 후가공 공정에 의한 흡음재의 제조와 특성", 한국염색가공학회지, 23(4), pp.304~311 (2011), 한국염색가공학회
- Y. Pu, "Preparation of Polypropylene Micro and Nanofibers by Electrostatic-Assisted Melt Blown and Their Application", Polymers, 10(9), pp.959~ (2018)
- R. Nayak, "Recent Advances in Nanofibre Fabrication Technique", Textile Research Journal, 82(2), pp.129~ (2011)
- 김수현, "Fabrication of Poly(L-lactide) Fibers", Sheets Using Supercritical Fluid through Flash-Spinning Process, 2010, pp.18(12), 1233~1236[DOI]
- H. Blades, Wilmington, "U.S. Pat. US3081519A", ~ (1962)
- M. Weinberg, "U.S. Pat. US20060135020A1", ~ (2006)
- D. A. Christopherson, "High-Efficiency Particulate Air Filters in the Era of COVID-19 : Function and Efficacy", Otolaryngology-Head and Neck Surgery, 163(6), pp.1153~ (2020)
- G. Zhu, "Air Permeability of Polyester Nonwoven Fabrics", AUTEX Research Journal, 15(1), pp.8~ (2015)