자장여과아크소스의 자장필터 꺾임 각도와 아크방전전류에따라 증착된 ta-C 코팅의 마모 거동 연구
A Study on the Wear Behavior of Tetrahedral AmorphousCarbon Coatings Based on Bending Angles of the Filtered Cathodic Vacuum Arc with Different Arc Discharge Currents
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
The structure and properties of tetrahedral amorphous carbon (ta-C) coatings depend on the main process parameters and bending angles of the magnetic field filter used in the filtered cathodic vacuum arc (FCVA). During the process, it is possible to effectively control the plasma flux of carbon ions incident on the substrate by controlling the arc discharge current, thereby influencing the mechanical properties of the coating film. Furthermore, we can control the size and amount of large particles mixed during carbon film formation while conforming with the bending angle of the mechanical filter mounted on the FCVA; therefore, it also influences the mechanical properties. In this study, we consider tribological characteristics for filtered bending angles of 45° and 90° as a function of arc discharge currents of 60 and 100 A, respectively. Experiment results indicate that the frictional behavior of the ta-C coating film is independent of the bending angle of the filter. However, its sliding wear behavior significantly changes according to the bending angle of the FCVA filter, unlike the effect of the discharge current. Further, upon changing the bending angle from 45° to 90°, abrasive wear gets accelerated, thereby changing the size and mixing amount of macro particles inside the coating film.
Abstract
The structure and properties of tetrahedral amorphous carbon (ta-C) coatings depend on the main process parameters and bending angles of the magnetic field filter used in the filtered cathodic vacuum arc (FCVA). During the process, it is possible to effectively control the plasma flux of carbon ions incident on the substrate by controlling the arc discharge current, thereby influencing the mechanical properties of the coating film. Furthermore, we can control the size and amount of large particles mixed during carbon film formation while conforming with the bending angle of the mechanical filter mounted on the FCVA; therefore, it also influences the mechanical properties. In this study, we consider tribological characteristics for filtered bending angles of 45° and 90° as a function of arc discharge currents of 60 and 100 A, respectively. Experiment results indicate that the frictional behavior of the ta-C coating film is independent of the bending angle of the filter. However, its sliding wear behavior significantly changes according to the bending angle of the FCVA filter, unlike the effect of the discharge current. Further, upon changing the bending angle from 45° to 90°, abrasive wear gets accelerated, thereby changing the size and mixing amount of macro particles inside the coating film.
참고문헌 (20)
- Robertson J, "Diamond- like amorphous carbon", Mater. Sci. Eng, 37, pp.129181~ (2002)
- Aisenberg, S, "Ion-Beam Deposition of Thin Films of Diamondlike Carbon", J. Appl. Phys, 42, pp.2953~2958 (1971)
- Vetter, J, "60 years of DLC coatings: Historical highlights and technical review of cathodic arc pro-cesses to synthesize various DLC types, and their evolution for industrial applications", Surf. Coat. Technol, 257, pp.213~240 (2014)
- 이준혁, "강체인 구와 DLC 코팅면 사이의 압입 및 미끄럼 접촉해석: 지지층 두께의 영향", 한국트라이볼로지학회지, 30(4), pp.199~204 (2014), 한국트라이볼로지학회[DOI]
- 장붕, "DLC와 PTFE표면코팅에 따른 자기유변유체의 마찰 마모 특성", 한국트라이볼로지학회지, 31(2), pp.62~68 (2015), 한국트라이볼로지학회[DOI]
- 이의영, "Application of ta-C Coating on WC Mold to Molded Glass Lens", 한국트라이볼로지학회지, 35(2), pp.106~113 (2019), 한국트라이볼로지학회[DOI]
- 강용진, "공정 온도에 따른 사면체 비정질 카본 (ta-C) 코팅의트라이볼로지적 특성연구", 한국트라이볼로지학회지, 35(6), pp.362~368 (2019), 한국트라이볼로지학회[DOI]
- 곽승윤, "다구찌 강건 설계를 통한 자장 여과 아크 소스로 증착된 사면체 비정질 탄소막의 최적화", 한국표면공학회지, 54(2), pp.53~61 (2021), 한국표면공학회
- Jang, Young-Jun, "Friction properties of thick tetrahedral amorphous carbon coating with different surface defects under dry contact conditions", Applied Surface Science, 550(1-2), pp.149332~ (2021)[DOI]
- Kim, Jongkuk, "Improvement of Source Stabilization and Beam Transport Efficiency in Filtered Vacuum Arc Source of Carbon", pp.2000
- Cheng, Y. H, "Influence of substrate bias on the structure and mechanical properties of ta-C:W films deposited by filtered cathodic vacuum arc", Surf. Coat. Technol, 146-147, pp.398~404 (2001)[DOI]
- Zia, Abdul Wasy, "Evaluation of bias voltage effect on diamondlike carbon coating properties deposited on tungsten carbide cobalt", Surf. Interface Anal, 46(Iss.3), pp.152~115 (2014)[DOI]
- Peng Wang, "The effect of applied negative bias voltage on the structure of Ti-doped a-C:H films deposited by FCVA", Applied Surface Science, 253(7), pp.3722~3726 (2007), Elsevier BV[DOI]
- Ferrari, A. C, "Elastic constants of Dia-mond like carbon films by surface brillouin scatter-ing", MRS Online Proceeding Library Archive, 593, pp.311~316 (2000)
- Abden, M. J, "Microstructure and Mechanical Properties of 3YSZ Ceramics Rainforced with Al2O3 Particles", Int. J. Mater Eng, 4(4), pp.129~135 (2014)[DOI]
- Lee, Woo-Young, "Investigating running-in behavior to understand wear behavior of ta-C coating with filtered cathodic vacuum are deposition", Jurnal Tribologi, 23, pp.38~47 (2019)
- E. Rabinowicz, "A study of abrasive wear under three-body conditions", Wear, 4(5), pp.345~355 (1961), Elsevier BV[DOI]
- E. Rabinowicz, "Friction and Wear of Materials" (1965), Wiley
- HISAKADO, T, "The Influence of Surface Roughness on Abrasive Wear", Wear, 41, pp.179~190 (1976)
- Lee, W.-Y, "Effect of defects on wear behavior in ta-C coating prepared by filtered cathodic vacuum arc deposition", Diamond & Related Materials, 105, pp.107789~ (2018)[DOI]